Re: [PATCHv5,5/5] ARM: dts: omap4-droid4: add soundcard

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Fri, Mar 23, 2018 at 11:09:30AM +0100, Pavel Machek wrote:
> Hi!
> 
> > > # CONFIG_SND_OMAP_SOC_RX51 is not set
> > > # CONFIG_SND_OMAP_SOC_N9 is not set
> > > CONFIG_SND_OMAP_SOC_OMAP_TWL4030=y
> > > CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=y
> > 
> > That's not needed (but does not hurt). The Droid 4
> > has no TWL companion chip and uses CPCAP instead.
> 
> Aha, thanks. I was doing wild experiments to get something that
> boots... I turned them off.
> 
> > > Any ideas?
> > 
> > You probably did not enable the soundcard driver, that binds against
> > "audio-graph-card" compatible and connects the codec driver with the
> > SoC driver: CONFIG_SND_AUDIO_GRAPH_CARD
> 
> Ok, that certainly changed things; I am now getting this:
> 
> Mar 23 08:39:17 devuan kernel: [   11.633605] asoc-audio-graph-card soundcard: GPIO lookup for
>  consumer pa
> Mar 23 08:39:17 devuan kernel: [   11.644958] asoc-audio-graph-card soundcard: using device tr
> ee for GPIO lookup
> Mar 23 08:39:17 devuan kernel: [   11.656677] of_get_named_gpiod_flags: can't parse 'pa-gpios'
>  property of node '/soundcard[0]'
> Mar 23 08:39:17 devuan kernel: [   11.669738] of_get_named_gpiod_flags: can't parse 'pa-gpio' 
> property of node '/soundcard[0]'
> Mar 23 08:39:17 devuan kernel: [   11.682617] asoc-audio-graph-card soundcard: using lookup ta
> bles for GPIO lookup
> Mar 23 08:39:17 devuan kernel: [   11.694427] asoc-audio-graph-card soundcard: lookup for GPIO
>  pa failed

That's not an error, but just some debug messages. Consider
disabling CONFIG_DEBUG_GPIO to get rid of them.

> Indeed the dts does not seem to contain any gpios

It's optional and does not exist on Droid 4.

>         soundcard {
>                 compatible = "audio-graph-card";
>                 label = "Droid 4 Audio";
> 
>                 simple-graph-card,widgets =
>                         "Speaker", "Earpiece",
>                         "Speaker", "Loudspeaker",
> 	                "Headphone", "Headphone Jack",
> 	                "Microphone", "Internal Mic";
> 
>                 simple-graph-card,routing =
> 	                "Earpiece", "EP",
> 		        "Loudspeaker", "SPKR",
>                         "Headphone Jack", "HSL",
>                         "Headphone Jack", "HSR",
> 	                "MICR", "Internal Mic";
> 
>                 dais = <&mcbsp2_port>, <&mcbsp3_port>;
> 	};
> 
> Any more ideas? :-)

Make sure, that the device was not proped properly (cat
/proc/asound/cards) and post the real error? :)

-- Sebastian

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux