Hi Lorenzo,
On Monday 26 February 2018 04:00 PM, Lorenzo Pieralisi wrote:
> On Tue, Dec 19, 2017 at 02:28:23PM +0530, Kishon Vijay Abraham I wrote:
>> dra74x/dra76x and dra72x has separate compatible strings. Add support
>
> s/has/have
>
>> for these compatible strings in pci-dra7xx driver to perform syscon
>> configurations required to get x2 mode working.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>> ---
>> drivers/pci/dwc/pci-dra7xx.c | 90 ++++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 90 insertions(+)
>>
>> diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
>> index e77a4ceed74c..3b4427c10228 100644
>> --- a/drivers/pci/dwc/pci-dra7xx.c
>> +++ b/drivers/pci/dwc/pci-dra7xx.c
>> @@ -83,11 +83,15 @@
>> #define MSI_REQ_GRANT BIT(0)
>> #define MSI_VECTOR_SHIFT 7
>>
>> +#define PCIE_1LANE_2LANE_SELECTION BIT(13)
>> +#define PCIE_B1C0_MODE_SEL BIT(2)
>> +
>> struct dra7xx_pcie {
>> struct dw_pcie *pci;
>> void __iomem *base; /* DT ti_conf */
>> int phy_count; /* DT phy-names count */
>> struct phy **phy;
>> + u32 *b1c0_mask;
>
> This looks unused in the current patch.
yeah, I'll remove it while sending the next revision.
>
>> int link_gen;
>> struct irq_domain *irq_domain;
>> enum dw_pcie_device_mode mode;
>> @@ -95,6 +99,7 @@ struct dra7xx_pcie {
>>
>> struct dra7xx_pcie_of_data {
>> enum dw_pcie_device_mode mode;
>> + u32 b1co_mode_sel_mask;
>> };
>>
>> #define to_dra7xx_pcie(x) dev_get_drvdata((x)->dev)
>> @@ -533,6 +538,26 @@ static const struct dra7xx_pcie_of_data dra7xx_pcie_ep_of_data = {
>> .mode = DW_PCIE_EP_TYPE,
>> };
>>
>> +static const struct dra7xx_pcie_of_data dra746_pcie_rc_of_data = {
>> + .b1co_mode_sel_mask = BIT(2),
>
> Nit: DT guys are more familiar than me on how this data should be
> encoded but maybe bit offset + length can be better ? I do not know, I
> have no problem leaving them as masks.
>
>> + .mode = DW_PCIE_RC_TYPE,
>> +};
>> +
>> +static const struct dra7xx_pcie_of_data dra726_pcie_rc_of_data = {
>> + .b1co_mode_sel_mask = GENMASK(3, 2),
>> + .mode = DW_PCIE_RC_TYPE,
>> +};
>> +
>> +static const struct dra7xx_pcie_of_data dra746_pcie_ep_of_data = {
>> + .b1co_mode_sel_mask = BIT(2),
>> + .mode = DW_PCIE_EP_TYPE,
>> +};
>> +
>> +static const struct dra7xx_pcie_of_data dra726_pcie_ep_of_data = {
>> + .b1co_mode_sel_mask = GENMASK(3, 2),
>> + .mode = DW_PCIE_EP_TYPE,
>> +};
>> +
>> static const struct of_device_id of_dra7xx_pcie_match[] = {
>> {
>> .compatible = "ti,dra7-pcie",
>> @@ -542,6 +567,22 @@ static const struct of_device_id of_dra7xx_pcie_match[] = {
>> .compatible = "ti,dra7-pcie-ep",
>> .data = &dra7xx_pcie_ep_of_data,
>> },
>> + {
>> + .compatible = "ti,dra746-pcie-rc",
>> + .data = &dra746_pcie_rc_of_data,
>> + },
>> + {
>> + .compatible = "ti,dra726-pcie-rc",
>> + .data = &dra726_pcie_rc_of_data,
>> + },
>> + {
>> + .compatible = "ti,dra746-pcie-ep",
>> + .data = &dra746_pcie_ep_of_data,
>> + },
>> + {
>> + .compatible = "ti,dra726-pcie-ep",
>> + .data = &dra726_pcie_ep_of_data,
>> + },
>> {},
>> };
>>
>> @@ -587,6 +628,47 @@ static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev)
>> return ret;
>> }
>>
>> +static int dra7xx_pcie_configure_two_lane(struct device *dev,
>> + u32 b1co_mode_sel_mask)
>> +{
>> + struct device_node *np = dev->of_node;
>> + struct regmap *pcie_syscon;
>> + unsigned int pcie_reg;
>> +
>> + pcie_syscon = syscon_regmap_lookup_by_phandle(np,
>> + "ti,syscon-lane-conf");
>> + if (IS_ERR(pcie_syscon)) {
>> + dev_err(dev, "unable to get ti,syscon-lane-conf\n");
>> + return -EINVAL;
>> + }
>> +
>> + if (of_property_read_u32_index(np, "ti,syscon-lane-conf", 1,
>> + &pcie_reg)) {
>> + dev_err(dev, "couldn't get lane configuration reg offset\n");
>> + return -EINVAL;
>> + }
>> +
>> + regmap_update_bits(pcie_syscon, pcie_reg, PCIE_1LANE_2LANE_SELECTION,
>> + PCIE_1LANE_2LANE_SELECTION);
>
> I do not know if this can create issues but the regmap should clear
> those bits in the error path ?
hmm yeah, maybe we should try to fall back to 1 lane mode.
>
>> +
>> + pcie_syscon = syscon_regmap_lookup_by_phandle(np, "ti,syscon-lane-sel");
>> + if (IS_ERR(pcie_syscon)) {
>> + dev_err(dev, "unable to get ti,syscon-lane-sel\n");
>> + return -EINVAL;
>> + }
>> +
>> + if (of_property_read_u32_index(np, "ti,syscon-lane-sel", 1,
>> + &pcie_reg)) {
>> + dev_err(dev, "couldn't get lane selection reg offset\n");
>> + return -EINVAL;
>> + }
>> +
>> + regmap_update_bits(pcie_syscon, pcie_reg, b1co_mode_sel_mask,
>> + PCIE_B1C0_MODE_SEL);
>> +
>> + return 0;
>> +}
>> +
>> static int __init dra7xx_pcie_probe(struct platform_device *pdev)
>> {
>> u32 reg;
>> @@ -608,6 +690,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
>> const struct of_device_id *match;
>> const struct dra7xx_pcie_of_data *data;
>> enum dw_pcie_device_mode mode;
>> + u32 b1co_mode_sel_mask;
>
> Again, do you need this temporary variable (given that you pass the
> value below) ?
I used so that we don't cross the 80 line character limit below.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
