On Fri, Jan 19, 2018 at 3:42 AM, Tero Kristo <t-kristo@xxxxxx> wrote:
> On 18/01/18 16:12, Adam Ford wrote:
>>
>> On Thu, Jan 18, 2018 at 7:29 AM, Tero Kristo <t-kristo@xxxxxx> wrote:
>>>
>>> On 18/01/18 15:26, Adam Ford wrote:
>>>>
>>>>
>>>> On Thu, Jan 18, 2018 at 1:34 AM, Tero Kristo <t-kristo@xxxxxx> wrote:
>>>>>
>>>>>
>>>>> On 17/01/18 23:44, Adam Ford wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Wed, Jan 17, 2018 at 3:19 PM, Tony Lindgren <tony@xxxxxxxxxxx>
>>>>>> wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> * Adam Ford <aford173@xxxxxxxxx> [180117 15:15]:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Jan 17, 2018 at 8:02 AM, Tero Kristo <t-kristo@xxxxxx>
>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 17/01/18 15:27, Adam Ford wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Sat, Mar 11, 2017 at 6:50 AM, Tero Kristo <t-kristo@xxxxxx>
>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Currently, TI clock driver uses an encapsulated struct that is
>>>>>>>>>>> cast
>>>>>>>>>>> into
>>>>>>>>>>> a void pointer to store all register addresses. This can be
>>>>>>>>>>> considered
>>>>>>>>>>> as rather nasty hackery, and prevents from expanding the register
>>>>>>>>>>> address field also. Instead, replace all the code to use proper
>>>>>>>>>>> struct
>>>>>>>>>>> in place for this, which contains all the previously used data.
>>>>>>>>>>>
>>>>>>>>>>> This patch is rather large as it is touching multiple files, but
>>>>>>>>>>> this
>>>>>>>>>>> can't be split up as we need to avoid any boot breakage.
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I know it's late coming, but according to git bisect, this patch
>>>>>>>>>> is
>>>>>>>>>> causing some problems with Logic PD Torpedo 37xx Dev kit.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Oh reporting bugs is never too late, thanks for posting this out.
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> It it is a DM3730 that has a WL1283 chipset attached to the SDIO
>>>>>>>>>> interface on MMC3. The driver seems to load properly, but when
>>>>>>>>>> loading wpa_supplicant to activate the WL1283, we get a giant
>>>>>>>>>> crash.
>>>>>>>>>> I checked kernel revisions starting at 4.14 and working back to
>>>>>>>>>> when
>>>>>>>>>> it worked, then used git bisect from there.
>>>>>>>>>>
>>>>>>>>>> I am hoping it might be a simple fix for something that just needs
>>>>>>>>>> to
>>>>>>>>>> get added or tweaked in the device tree.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I don't have access to the specific hw, but can you try to dig out
>>>>>>>>> which
>>>>>>>>> hwmod is causing the crash? Just print out the oh->name from the
>>>>>>>>> _wait_softreset_complete. That would help root causing the issue.
>>>>>>>>>
>>>>>>>>
>>>>>>>> With one small patch, I was able to make it work again.
>>>>>>>>
>>>>>>>> diff --git a/arch/arm/mach-omap2/omap_hwmod.c
>>>>>>>> b/arch/arm/mach-omap2/omap_hwmod.c
>>>>>>>> index 2dbd632..ed1f625 100644
>>>>>>>> --- a/arch/arm/mach-omap2/omap_hwmod.c
>>>>>>>> +++ b/arch/arm/mach-omap2/omap_hwmod.c
>>>>>>>> @@ -477,7 +477,7 @@ static int _wait_softreset_complete(struct
>>>>>>>> omap_hwmod *oh)
>>>>>>>> int c = 0;
>>>>>>>>
>>>>>>>> sysc = oh->class->sysc;
>>>>>>>> -
>>>>>>>> +pr_warn("_wait_softreset_complete: %s\n", oh->name);
>>>>>>>> if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
>>>>>>>> omap_test_timeout((omap_hwmod_read(oh,
>>>>>>>> sysc->syss_offs)
>>>>>>>> & SYSS_RESETDONE_MASK),
>>>>>>>>
>>>>>>>>
>>>>>>>> This leads me to believe that the omap_test_timeout functions might
>>>>>>>> not be working quite right.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> There may be a srst_udelay needed for some module, see commit
>>>>>>> ebf244148092 ("ARM: OMAP2+: Use srst_udelay for USB on dm814x")
>>>>>>> for example.
>>>>>>>
>>>>>>> You might be able to find which module it is by commenting out
>>>>>>> postcore_initcall_sync(omap3_l3_init) in drivers/bus/omap_l3_smx.c
>>>>>>> temporarily as the system will most likely hang right there.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> I commented out that line as you suggested, but the system boots as
>>>>>> normal and I get the crash (as normal)
>>>>>>
>>>>>> I am looking through the DM3730 and OMAP3630 TRM now. Any thought on
>>>>>> a keyword search I should use to see which hwmods might require
>>>>>> srst_udelay?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Looking at the log you provided, it looks like only mmc1, mmc3 and i2c1
>>>>> are
>>>>> reset during the wlan probe. Based on the prints coming out in the
>>>>> failing
>>>>> case, it looks like the culprit might be mmc3 for some reason.
>>>>>
>>>>> [ 18.239746] _wait_softreset_complete: mmc3
>>>>> [ 18.638580] _wait_softreset_complete: mmc3
>>>>> [ 18.657562] _wait_softreset_complete: mmc1
>>>>> [ 18.833374] wlcore: firmware booted (Rev 7.3.10.0.141)
>>>>>
>>>>> ^ the firmware notification above does not come out in the crash.
>>>>>
>>>>
>>>> I agree with your assessment. Any ideas why moving the debug
>>>> statement before the if statement would make it start working? I
>>>> added some artificial udelay at around 100, but I still got the crash.
>>>> It seems like there is some timing issue, but at the same time just
>>>> adding a delay isn't enough.
>>>
>>>
>>>
>>> The pr_warn does more than just delay, it accesses the io-space
>>> potentially
>>> causing a flush on certain IO ranges. There might be some OCP readback
>>> missing for example, in which case a simple udelay may not help.
>>>
>>
>> I am not very familiar with the OCP and/or how the flushing would
>> impact this. Do you have any suggestions on how I can troubleshoot?
>
>
> Typically an OCP barrier is inserted in the code as an immediate readback of
> the register in question, this effectively forces the register write all the
> way to the IP.
>
> But, you said that the issue gets fixed with 4.15-rc? You could just simply
> bisect the issue and see which exact patch fixes it.
>
Good idea. It looks like 3c4d296e58a2 ("ARM: OMAP3: hwmod_data: add
missing module_offs for MMC3") fixed the problem. I've tested that on
Linux 4.14.14 and it fixes my issues. I'll e-mail stable and ask him
to backport this patch and I'll CC you on it.
adam
> -Tero
>
>
>>
>> adam
>>
>>> -Tero
>>>
>>>
>>>>
>>>>> -Tero
>>>>>
>>>>
>>>> adam
>>>>
>>>>>>
>>>>>> adam
>>>>>>
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>> Tony
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> To unsubscribe from this list: send the line "unsubscribe linux-clk"
>>>>>> in
>>>>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>>>
>>>>>
>>>>> --
>>>
>>>
>>>
>>> --
>
>
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
