On Thu, Jan 18, 2018 at 7:29 AM, Tero Kristo <t-kristo@xxxxxx> wrote:
> On 18/01/18 15:26, Adam Ford wrote:
>>
>> On Thu, Jan 18, 2018 at 1:34 AM, Tero Kristo <t-kristo@xxxxxx> wrote:
>>>
>>> On 17/01/18 23:44, Adam Ford wrote:
>>>>
>>>>
>>>> On Wed, Jan 17, 2018 at 3:19 PM, Tony Lindgren <tony@xxxxxxxxxxx> wrote:
>>>>>
>>>>>
>>>>> * Adam Ford <aford173@xxxxxxxxx> [180117 15:15]:
>>>>>>
>>>>>>
>>>>>> On Wed, Jan 17, 2018 at 8:02 AM, Tero Kristo <t-kristo@xxxxxx> wrote:
>>>>>>>
>>>>>>>
>>>>>>> On 17/01/18 15:27, Adam Ford wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Sat, Mar 11, 2017 at 6:50 AM, Tero Kristo <t-kristo@xxxxxx>
>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Currently, TI clock driver uses an encapsulated struct that is cast
>>>>>>>>> into
>>>>>>>>> a void pointer to store all register addresses. This can be
>>>>>>>>> considered
>>>>>>>>> as rather nasty hackery, and prevents from expanding the register
>>>>>>>>> address field also. Instead, replace all the code to use proper
>>>>>>>>> struct
>>>>>>>>> in place for this, which contains all the previously used data.
>>>>>>>>>
>>>>>>>>> This patch is rather large as it is touching multiple files, but
>>>>>>>>> this
>>>>>>>>> can't be split up as we need to avoid any boot breakage.
>>>>>>>>>
>>>>>>>>
>>>>>>>> I know it's late coming, but according to git bisect, this patch is
>>>>>>>> causing some problems with Logic PD Torpedo 37xx Dev kit.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Oh reporting bugs is never too late, thanks for posting this out.
>>>>>>>
>>>>>>>>
>>>>>>>> It it is a DM3730 that has a WL1283 chipset attached to the SDIO
>>>>>>>> interface on MMC3. The driver seems to load properly, but when
>>>>>>>> loading wpa_supplicant to activate the WL1283, we get a giant crash.
>>>>>>>> I checked kernel revisions starting at 4.14 and working back to when
>>>>>>>> it worked, then used git bisect from there.
>>>>>>>>
>>>>>>>> I am hoping it might be a simple fix for something that just needs
>>>>>>>> to
>>>>>>>> get added or tweaked in the device tree.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> I don't have access to the specific hw, but can you try to dig out
>>>>>>> which
>>>>>>> hwmod is causing the crash? Just print out the oh->name from the
>>>>>>> _wait_softreset_complete. That would help root causing the issue.
>>>>>>>
>>>>>>
>>>>>> With one small patch, I was able to make it work again.
>>>>>>
>>>>>> diff --git a/arch/arm/mach-omap2/omap_hwmod.c
>>>>>> b/arch/arm/mach-omap2/omap_hwmod.c
>>>>>> index 2dbd632..ed1f625 100644
>>>>>> --- a/arch/arm/mach-omap2/omap_hwmod.c
>>>>>> +++ b/arch/arm/mach-omap2/omap_hwmod.c
>>>>>> @@ -477,7 +477,7 @@ static int _wait_softreset_complete(struct
>>>>>> omap_hwmod *oh)
>>>>>> int c = 0;
>>>>>>
>>>>>> sysc = oh->class->sysc;
>>>>>> -
>>>>>> +pr_warn("_wait_softreset_complete: %s\n", oh->name);
>>>>>> if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
>>>>>> omap_test_timeout((omap_hwmod_read(oh,
>>>>>> sysc->syss_offs)
>>>>>> & SYSS_RESETDONE_MASK),
>>>>>>
>>>>>>
>>>>>> This leads me to believe that the omap_test_timeout functions might
>>>>>> not be working quite right.
>>>>>
>>>>>
>>>>>
>>>>> There may be a srst_udelay needed for some module, see commit
>>>>> ebf244148092 ("ARM: OMAP2+: Use srst_udelay for USB on dm814x")
>>>>> for example.
>>>>>
>>>>> You might be able to find which module it is by commenting out
>>>>> postcore_initcall_sync(omap3_l3_init) in drivers/bus/omap_l3_smx.c
>>>>> temporarily as the system will most likely hang right there.
>>>>
>>>>
>>>>
>>>> I commented out that line as you suggested, but the system boots as
>>>> normal and I get the crash (as normal)
>>>>
>>>> I am looking through the DM3730 and OMAP3630 TRM now. Any thought on
>>>> a keyword search I should use to see which hwmods might require
>>>> srst_udelay?
>>>
>>>
>>>
>>> Looking at the log you provided, it looks like only mmc1, mmc3 and i2c1
>>> are
>>> reset during the wlan probe. Based on the prints coming out in the
>>> failing
>>> case, it looks like the culprit might be mmc3 for some reason.
>>>
>>> [ 18.239746] _wait_softreset_complete: mmc3
>>> [ 18.638580] _wait_softreset_complete: mmc3
>>> [ 18.657562] _wait_softreset_complete: mmc1
>>> [ 18.833374] wlcore: firmware booted (Rev 7.3.10.0.141)
>>>
>>> ^ the firmware notification above does not come out in the crash.
>>>
>>
>> I agree with your assessment. Any ideas why moving the debug
>> statement before the if statement would make it start working? I
>> added some artificial udelay at around 100, but I still got the crash.
>> It seems like there is some timing issue, but at the same time just
>> adding a delay isn't enough.
>
>
> The pr_warn does more than just delay, it accesses the io-space potentially
> causing a flush on certain IO ranges. There might be some OCP readback
> missing for example, in which case a simple udelay may not help.
>
I am not very familiar with the OCP and/or how the flushing would
impact this. Do you have any suggestions on how I can troubleshoot?
adam
> -Tero
>
>
>>
>>> -Tero
>>>
>>
>> adam
>>
>>>>
>>>> adam
>>>>
>>>>>
>>>>> Regards,
>>>>>
>>>>> Tony
>>>>
>>>>
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe linux-clk" in
>>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>
>>>
>>> --
>
>
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
