Re: OMAP3 interrupt latency much worse when CPU idle

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 23, 2017 at 10:35:42AM +0100, Ladislav Michl wrote:
> On Thu, Nov 16, 2017 at 03:04:48PM -0600, Grygorii Strashko wrote:
> [snip]
> > I recommend to disable CPU idle completely in config and re-check test,
> > before continue with other things.
> 
> Strangely enough latency is much worse with CONFIG_CPU_IDLE disabled.

While it is better with:
CONFIG_HZ_PERIODIC=y
CONFIG_CPU_FREQ=n
CONFIG_PM=n

But both ehci and musb does not see any device connected and:

IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/arm/mach-omap2/omap_hwmod.c:2098 _enable+0x48/0x234
omap_hwmod: timer1: enabled state can only be entered from initialized, idle, or disabled state
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.14.1-00048-gfa283847c99a #12
Hardware name: Generic OMAP36xx (Flattened Device Tree)
[<c010c304>] (unwind_backtrace) from [<c010a708>] (show_stack+0x10/0x14)
[<c010a708>] (show_stack) from [<c012395c>] (__warn+0xdc/0xf8)
[<c012395c>] (__warn) from [<c01239ac>] (warn_slowpath_fmt+0x34/0x44)
[<c01239ac>] (warn_slowpath_fmt) from [<c0117e50>] (_enable+0x48/0x234)
[<c0117e50>] (_enable) from [<c01184e0>] (omap_hwmod_enable+0x18/0x28)
[<c01184e0>] (omap_hwmod_enable) from [<c07083a8>] (omap_dm_timer_init_one+0x150/0x248)
[<c07083a8>] (omap_dm_timer_init_one) from [<c0708550>] (__omap_sync32k_timer_init.constprop.1+0x74/0x234)
[<c0708550>] (__omap_sync32k_timer_init.constprop.1) from [<c0708734>] (omap_init_time+0x24/0x38)
[<c0708734>] (omap_init_time) from [<c0700abc>] (start_kernel+0x208/0x378)
[<c0700abc>] (start_kernel) from [<80008078>] (0x80008078)
---[ end trace 6bf4eb748e85f1ee ]---
OMAP clockevent source: timer1 at 32768 Hz
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/arm/mach-omap2/omap_hwmod.c:2098 _enable+0x48/0x234
omap_hwmod: counter_32k: enabled state can only be entered from initialized, idle, or disabled state
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Tainted: G        W       4.14.1-00048-gfa283847c99a #12
Hardware name: Generic OMAP36xx (Flattened Device Tree)
[<c010c304>] (unwind_backtrace) from [<c010a708>] (show_stack+0x10/0x14)
[<c010a708>] (show_stack) from [<c012395c>] (__warn+0xdc/0xf8)
[<c012395c>] (__warn) from [<c01239ac>] (warn_slowpath_fmt+0x34/0x44)
[<c01239ac>] (warn_slowpath_fmt) from [<c0117e50>] (_enable+0x48/0x234)
[<c0117e50>] (_enable) from [<c01184e0>] (omap_hwmod_enable+0x18/0x28)
[<c01184e0>] (omap_hwmod_enable) from [<c07086bc>] (__omap_sync32k_timer_init.constprop.1+0x1e0/0x234)
[<c07086bc>] (__omap_sync32k_timer_init.constprop.1) from [<c0708734>] (omap_init_time+0x24/0x38)
[<c0708734>] (omap_init_time) from [<c0700abc>] (start_kernel+0x208/0x378)
[<c0700abc>] (start_kernel) from [<80008078>] (0x80008078)
---[ end trace 6bf4eb748e85f1ef ]---
omap2_sync32k_clocksource_init: failed to enable counter_32k module (-22)

Is it expected?

	ladis
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux