Re: [v2,1/3] can: m_can: Make hclk optional

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+ some OMAP folks and Linux OMAP list

On Tuesday 25 July 2017 04:21 AM, Franklin Cooper wrote:
> Hclk is the MCAN's interface clock. However, for OMAP based devices such as
> DRA7 SoC family the interface clock is handled by hwmod. Therefore, this
> interface clock is managed by hwmod driver via pm_runtime_get and
> pm_runtime_put calls. Therefore, this interface clock isn't defined in DT
> and thus the driver shouldn't fail if this clock isn't found.

I agree that hclk is defined as interface clock for M_CAN IP on DRA76x.

However, there may be a need for the driver to know the value of hclk to
properly configure the RAM watchdog register which has a counter
counting down using hclk. Looks like the driver does not use the RAM
watchdog today. But if there is a need to configure it in future, it
might be a problem.

Is there a restriction in OMAP architecture against passing the
interface clock also in the 'clocks' property in DT. I have not tried it
myself, but wonder if you hit an issue that led to this patch.

> 
> Signed-off-by: Franklin S Cooper Jr <fcooper@xxxxxx>
> ---
> Version 2 changes:
> Used NULL instead of 0 for unused hclk handle
> 
>  drivers/net/can/m_can/m_can.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> index f4947a7..ea48e59 100644
> --- a/drivers/net/can/m_can/m_can.c
> +++ b/drivers/net/can/m_can/m_can.c
> @@ -1568,8 +1568,13 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  	hclk = devm_clk_get(&pdev->dev, "hclk");
>  	cclk = devm_clk_get(&pdev->dev, "cclk");
>  
> -	if (IS_ERR(hclk) || IS_ERR(cclk)) {
> -		dev_err(&pdev->dev, "no clock found\n");
> +	if (IS_ERR(hclk)) {
> +		dev_warn(&pdev->dev, "hclk could not be found\n");
> +		hclk = NULL;

What is the purpose of NULL setting the clock. I think this is taking it
into a very implementation defined territory and the result could be
different on different architectures. See Russell's explanation here:
https://lkml.org/lkml/2016/11/10/799

Thanks,
Sekhar

> +	}
> +
> +	if (IS_ERR(cclk)) {
> +		dev_err(&pdev->dev, "cclk could not be found\n");
>  		ret = -ENODEV;
>  		goto failed_ret;
>  	}
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux