* Grygorii Strashko <grygorii.strashko@xxxxxx> [170724 15:17]: > My personal thought here is that removing of pm_runtime_set_active() will not fix > root cause of the problem, but rather hide it :( and, probably, real fix will be > to update USB framework to ensure that all suspend devices are also PM runtime suspend > (not sure how) or add few more pm_suspend_ignore_children() calls > (for example as I've tried to do in [2], but this was unfinished). > > I've found very simple steps to reproduce suspend failure on am335x-evm (should also > work on BBB) - do below sequence with USB device plugged: > > echo platform > /sys/power/pm_test > echo 1 > /sys/power/pm_print_times > [ echo 0 > /sys/module/printk/parameters/console_suspend ] > echo mem > /sys/power/state > > [ 95.499685] calling 47400000.usb+ @ 733, parent: ocp > [ 95.504818] am335x-usb-childs 47400000.usb: runtime PM trying to suspend device but active child > [ 95.513750] am335x-usb-childs 47400000.usb: omap device suspend failure 0 > > Below I've attached possible patch which converts OMAP device to > use pm_runtime_force_suspend/resume(). It seems to almost work for my PM test cases.. It seems that serial console somehow won't get restored after suspend/resume cycle on omap3 though. The system enters off mode during suspend, and wakes up properly so I can ssh to it after resume. But the serial console no longer works after resume. This is with 8250-omap driver. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
