On Fri, 8 May 2009, Jean Pihet wrote: > On Thursday 07 May 2009 21:18:41 Paul Walmsley wrote: > > Hello Jean, > > > > one other suggestion. You mentioned that you had self-refresh working on > > another OMAP3430 board with two SDRAM chip-selects. You might consider > > dumping the SDRC registers from that board, and dumping the SDRC registers > > on Beagle rev C, and comparing. It could be that the bootloader on your > > other board is setting some important bit. > The comparison gives the following: > - the timings are slightly different but given that the parts are not the same > I do not think it is a problem > - the fields FIXEDDELAY and MODEFIXEDDELAYINITLAT are set in SDRC_DLLA_CTRL, > the register value is 0x2600000A. Does that affect the 166MHz operation? It shouldn't. > - the field DEEPPD of SDRC_MCFG_p is set to 0. That setting could affect the > suspend/resume I don't think this should matter, since we never power off the SDRAM. > - the MUX scheme is different: ADDRMUXLEGACY is set to 0 > - the field BANKALLOCATION of SDRC_MCFG_p is set to 0 instead of 2 - Paul -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
