* Tomi Valkeinen <tomi.valkeinen@xxxxxx> [161123 07:54]: > On 23/11/16 17:49, Laurent Pinchart wrote: > > Hi Tomi, > > > > On Wednesday 23 Nov 2016 12:14:17 Tomi Valkeinen wrote: > >> On 10/11/16 23:25, Laurent Pinchart wrote: > >>>>>> [ 2.766174] musb_bus_suspend 2586: trying to suspend as a_idle while > >>>>>> active > >>>>>> > >>>>>> printed in a loop at boot time. I've traced musb->is_active being set > >>>>>> to 1 in musb_start() with > >>> > >>> Actually disabling CONFIG_USB_MUSB_HDRC gets rid of the problem, quite > >>> understandably. It's not a fix though, just a workaround. Are you > >>> interested in investigating this ? > >> > >> I'm seeing this too. Did you manage to boot your Panda? If I disable > >> CONFIG_USB_MUSB_HDRC, I don't see that error print, but the ethernet > >> doesn't work, and so my nfsroot doesn't mount. > > > > Do you use ethernet over USB gadget or over LAN9514 (smsx95xx) ? The LAN9514 > > is connected to the EHCI USB interface so it shouldn't depend on MUSB. > > smsx95xx. I didn't look at it further, so possibly there's something > else broken/changed that prevented the ethernet from working. I have omap2plus_defconfig with initramfs work just fine for nfsroot and musb peripheral mode on pandaboard es. Well I have not tried it since last week with Linux next. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
