The following changes since commit 5c4d9f0d49b0c3beda734687248fc74542566ee9:
ARM: dts: dra7: Add missing unit name to memory nodes (2016-08-31 07:40:28 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.9/dt-pt2-signed
for you to fetch changes up to a2a2b8215621536a7620e31f36bede81bb86680b:
Merge branch 'am335x-cpufreq-regression' into omap-for-v4.9/dt-v2 (2016-09-14 16:27:28 -0700)
----------------------------------------------------------------
Part two of device tree changes for omaps for v4.9 merge window. This
is mostly usability and non-critical fixes except for the addition of
beagleboard-x15 rev B1 support:
- Fix omap4 pandaboard SDIO WLAN latencies in idle mode by enabling wakeirq
- Usability fixes for WLAN, USB, LEDs and power button on omap5 boards
- Remove am57xx beagleboard-x15 pinmux configuration as the processor requires
that it's done in IO isolation in bootloader except for MMC and DCAN
- Add support for beagleboard-x15 rev B1 by moving most of the
configuration to am57xx-beagle-x15-common.dtsi
- Enable support for more than 2GB of memory for omap5 with LPAE with
#address-cells
- Fix omap3-gta04 backlight PWM frequency until the PWM driver
- Revert am335x dts changes related to cpufreq as the driver changes
still have not merged and the dts changes broke cpufreq
----------------------------------------------------------------
Dave Gerlach (3):
Revert "ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu"
Revert "ARM: dts: am33xx: Move to operating-points-v2 table and ti-cpufreq driver"
Revert "ARM: dts: dra7: Move to operating-points-v2 table"
H. Nikolaus Schaller (1):
ARM: dts: omap3-gta04: reduce panel backlight PWM frequency to 83Hz
Nishanth Menon (2):
ARM: dts: am57xx-beagle-x15: Remove pinmux configurations for erratum i869
ARM: dts: am57xx-beagle-x15: Add support for rev B1
Tony Lindgren (7):
ARM: dts: Configure panda SDIO WLAN wakeirq
ARM: dts: ARM: dts: Fix omap5 SDIO dat1 interrupt
ARM: dts: Configure omap5 OTG ID pin
ARM: dts: Add power button support for igepv5
ARM: dts: Fix LEDs for igepv5
ARM: dts: Add support for more than 2GB of memory for omap5
Merge branch 'am335x-cpufreq-regression' into omap-for-v4.9/dt-v2
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/am335x-boneblack.dts | 11 -
arch/arm/boot/dts/am33xx.dtsi | 88 +--
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 596 +++++++++++++++++
arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts | 24 +
arch/arm/boot/dts/am57xx-beagle-x15.dts | 812 +-----------------------
arch/arm/boot/dts/dra7.dtsi | 26 +-
arch/arm/boot/dts/dra74x.dtsi | 1 -
arch/arm/boot/dts/omap3-gta04.dtsi | 2 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 2 +
arch/arm/boot/dts/omap5-board-common.dtsi | 29 +-
arch/arm/boot/dts/omap5-cm-t54.dts | 2 +-
arch/arm/boot/dts/omap5-igep0050.dts | 40 +-
arch/arm/boot/dts/omap5-uevm.dts | 16 +-
arch/arm/boot/dts/omap5.dtsi | 24 +-
15 files changed, 731 insertions(+), 943 deletions(-)
create mode 100644 arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
create mode 100644 arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
