This reverts commit 4317be1162108bcdf50dc53dfb48eac94dcff25c.
The original commit updated the cpufreq operating points tables for
am33xx but was merged before the driver making use of the node was
merged, which breaks the existing cpufreq implementation on the system,
so revert the patch until the ti-cpufreq driver is merged.
Signed-off-by: Dave Gerlach <d-gerlach@xxxxxx>
---
arch/arm/boot/dts/am33xx.dtsi | 88 +++++++------------------------------------
1 file changed, 13 insertions(+), 75 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 98748c61ed99..9e214bfd32d2 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -45,9 +45,19 @@
device_type = "cpu";
reg = <0>;
- operating-points-v2 = <&cpu0_opp_table>;
- ti,syscon-efuse = <&scm_conf 0x7fc 0x1fff 0>;
- ti,syscon-rev = <&scm_conf 0x600>;
+ /*
+ * To consider voltage drop between PMIC and SoC,
+ * tolerance value is reduced to 2% from 4% and
+ * voltage value is increased as a precaution.
+ */
+ operating-points = <
+ /* kHz uV */
+ 720000 1285000
+ 600000 1225000
+ 500000 1125000
+ 275000 1125000
+ >;
+ voltage-tolerance = <2>; /* 2 percentage */
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
@@ -56,78 +66,6 @@
};
};
- cpu0_opp_table: opp_table0 {
- compatible = "operating-points-v2";
-
- /*
- * The three following nodes are marked with opp-suspend
- * because the can not be enabled simultaneously on a
- * single SoC.
- */
- opp50@300000000 {
- opp-hz = /bits/ 64 <300000000>;
- opp-microvolt = <950000 931000 969000>;
- opp-supported-hw = <0x06 0x0010>;
- opp-suspend;
- };
-
- opp100@275000000 {
- opp-hz = /bits/ 64 <275000000>;
- opp-microvolt = <1100000 1078000 1122000>;
- opp-supported-hw = <0x01 0x00FF>;
- opp-suspend;
- };
-
- opp100@300000000 {
- opp-hz = /bits/ 64 <300000000>;
- opp-microvolt = <1100000 1078000 1122000>;
- opp-supported-hw = <0x06 0x0020>;
- opp-suspend;
- };
-
- opp100@500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <1100000 1078000 1122000>;
- opp-supported-hw = <0x01 0xFFFF>;
- };
-
- opp100@600000000 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <1100000 1078000 1122000>;
- opp-supported-hw = <0x06 0x0040>;
- };
-
- opp120@600000000 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <1200000 1176000 1224000>;
- opp-supported-hw = <0x01 0xFFFF>;
- };
-
- opp120@720000000 {
- opp-hz = /bits/ 64 <720000000>;
- opp-microvolt = <1200000 1176000 1224000>;
- opp-supported-hw = <0x06 0x0080>;
- };
-
- oppturbo@720000000 {
- opp-hz = /bits/ 64 <720000000>;
- opp-microvolt = <1260000 1234800 1285200>;
- opp-supported-hw = <0x01 0xFFFF>;
- };
-
- oppturbo@800000000 {
- opp-hz = /bits/ 64 <800000000>;
- opp-microvolt = <1260000 1234800 1285200>;
- opp-supported-hw = <0x06 0x0100>;
- };
-
- oppnitro@1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <1325000 1298500 1351500>;
- opp-supported-hw = <0x04 0x0200>;
- };
- };
-
pmu {
compatible = "arm,cortex-a8-pmu";
interrupts = <3>;
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
