Hi,
On 08/09/2016 02:33 PM, Jyri Sarha wrote:
Hi,
commit 183e2077d00 ("ARM: AM33xx: fix module_wait_ready without clkctrl
register") breaks Beaglebone-Black boot on 4.8-rc1 with plain
omap2plus_defconfig. The problem goes away if I drop OMAP_RTC from the
build.
I sent series on 7/12 to fix this here [1], and it looks like Tony has
accepted it.
Regards,
Dave
[1] http://www.spinics.net/lists/linux-omap/msg130698.html
BR,
Jyri
Here is the boot log:
## Booting kernel from Legacy Image at 80300000 ...
Image Name: Linux-4.8.0-rc1-00022-gcd80425
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3823464 Bytes = 3.6 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 825f0000
Booting using the fdt blob at 0x825f0000
Loading Kernel Image ... OK
OK
Using Device Tree in place at 825f0000, end 825fb9d4
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.8.0-rc1-00022-gcd80425 (oku@jadmar) (gcc
version 4.9.3 20150413 (prerelease) (Linaro GCC 4.9-2015.05) ) #4 SMP
Tue Aug 9 11:46:37 EEST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] OF: fdt:Machine model: TI AM335x BeagleBone Black
[ 0.000000] cma: Reserved 64 MiB at 0x9b800000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 130560
[ 0.000000] free_area_init_node: node 0, pgdat c0cba940, node_mem_map
df959000
[ 0.000000] Normal zone: 1152 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.0 (sgx neon )
[ 0.000000] percpu: Embedded 15 pages/cpu @df8fa000 s31680 r8192
d21568 u61440
[ 0.000000] pcpu-alloc: s31680 r8192 d21568 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 129408
[ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/nfs
rw nfsroot=10.1.1.15:/nfs/jessie-armhf rootwait
ip=10.1.1.24:10.1.1.15:10.1.1.1:255.255.255.0:epos::off init=/sbin/init
debug loglevel=8 video=HDMI-A-1:1280x960@60 cma=64M
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] Memory: 430944K/522240K available (7168K kernel code,
772K rwdata, 2372K rodata, 1024K init, 8122K bss, 25760K reserved,
65536K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
[ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB)
[ 0.000000] .data : 0xc0c00000 - 0xc0cc126c ( 773 kB)
[ 0.000000] .bss : 0xc0cc3000 - 0xc14b1978 (8123 kB)
[ 0.000000] Running RCU self tests
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128
interrupts
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000023] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps
every 89478484971ns
[ 0.000058] clocksource: timer1: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000128] OMAP clocksource: timer1 at 24000000 Hz
[ 0.000975] clocksource_probe: no matching clocksources found
[ 0.002464] Console: colour dummy device 80x30
[ 0.002558] Lock dependency validator: Copyright (c) 2006 Red Hat,
Inc., Ingo Molnar
[ 0.002575] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.002588] ... MAX_LOCK_DEPTH: 48
[ 0.002601] ... MAX_LOCKDEP_KEYS: 8191
[ 0.002614] ... CLASSHASH_SIZE: 4096
[ 0.002628] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.002641] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.002654] ... CHAINHASH_SIZE: 32768
[ 0.002667] memory used by lock dependency info: 5167 kB
[ 0.002681] per task-struct memory footprint: 1536 bytes
[ 0.002732] Calibrating delay loop... 545.58 BogoMIPS (lpj=2727936)
[ 0.097541] pid_max: default: 32768 minimum: 301
[ 0.098315] Security Framework initialized
[ 0.098552] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.098575] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.104290] CPU: Testing write buffer coherency: ok
[ 0.106970] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.107069] Setting up static identity map for 0x80100000 - 0x80100070
[ 0.114454] Brought up 1 CPUs
[ 0.114491] SMP: Total of 1 processors activated (545.58 BogoMIPS).
[ 0.114508] CPU: All CPU(s) started in SVC mode.
[ 0.121299] devtmpfs: initialized
[ 0.191324] VFP support v0.3: implementor 41 architecture 3 part 30
variant c rev 3
[ 0.192810] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.199642] pinctrl core: initialized pinctrl subsystem
[ 0.208174] NET: Registered protocol family 16
[ 0.218791] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.306040] omap_hwmod: debugss: _wait_target_disable failed
[ 0.362905] cpuidle: using governor menu
[ 0.381607] gpio gpiochip0: (gpio): added GPIO chardev (254:0)
[ 0.384168] gpiochip_setup_dev: registered GPIOs 0 to 31 on device:
gpiochip0 (gpio)
[ 0.386324] OMAP GPIO hardware version 0.1
[ 0.388705] gpio gpiochip1: (gpio): added GPIO chardev (254:1)
[ 0.391659] gpiochip_setup_dev: registered GPIOs 32 to 63 on device:
gpiochip1 (gpio)
[ 0.395744] gpio gpiochip2: (gpio): added GPIO chardev (254:2)
[ 0.397373] gpiochip_setup_dev: registered GPIOs 64 to 95 on device:
gpiochip2 (gpio)
[ 0.401348] gpio gpiochip3: (gpio): added GPIO chardev (254:3)
[ 0.402921] gpiochip_setup_dev: registered GPIOs 96 to 127 on device:
gpiochip3 (gpio)
[ 0.433411] No ATAGs?hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.433809] omap4_sram_init:Unable to allocate sram needed to handle
errata I688
[ 0.433839] omap4_sram_init:Unable to get sram pool needed to handle
errata I688
[ 0.514712] edma 49000000.edma: TI EDMA DMA engine driver
[ 0.515734] of_get_named_gpiod_flags: can't parse 'gpio' property of
node '/fixedregulator@0[0]'
[ 0.522987] SCSI subsystem initialized
[ 0.524279] libata version 3.00 loaded.
[ 0.525664] omap_i2c 44e0b000.i2c: could not find pctldev for node
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring
probe
[ 0.525856] omap_i2c 4819c000.i2c: could not find pctldev for node
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring
probe
[ 0.526314] pps_core: LinuxPPS API ver. 1 registered
[ 0.526332] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.526419] PTP clock support registered
[ 0.533897] clocksource: Switched to clocksource timer1
[ 0.712659] VFS: Disk quotas dquot_6.6.0
[ 0.712938] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.768873] NET: Registered protocol family 2
[ 0.771954] TCP established hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.772119] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
[ 0.774472] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.774842] UDP hash table entries: 256 (order: 2, 20480 bytes)
[ 0.775151] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[ 0.776618] NET: Registered protocol family 1
[ 0.779713] RPC: Registered named UNIX socket transport module.
[ 0.779750] RPC: Registered udp transport module.
[ 0.779768] RPC: Registered tcp transport module.
[ 0.779786] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.784035] hw perfevents: /pmu: failed to probe PMU!
[ 0.784069] hw perfevents: /pmu: failed to register PMU devices!
[ 0.784184] armv7-pmu: probe of pmu failed with error -22
[ 0.791394] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.791754] audit: initializing netlink subsys (disabled)
[ 0.792116] audit: type=2000 audit(0.780:1): initialized
[ 0.797920] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.801771] NFS: Registering the id_resolver key type
[ 0.802322] Key type id_resolver registered
[ 0.802347] Key type id_legacy registered
[ 0.802595] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red
Hat, Inc.
[ 0.811803] io scheduler noop registered
[ 0.811841] io scheduler deadline registered
[ 0.812015] io scheduler cfq registered (default)
[ 0.815786] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800
size 568
[ 0.820441] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.830976] omap_uart 44e09000.serial: no wakeirq for uart0
[ 0.831023] of_get_named_gpiod_flags: can't parse 'rts-gpio' property
of node '/ocp/serial@44e09000[0]'
[ 0.831973] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 158,
base_baud = 3000000) is a OMAP UART0
[ 1.672784] console [ttyO0] enabled
[ 1.744899] brd: module loaded
[ 1.788040] loop: module loaded
[ 1.795570] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.807573] libphy: Fixed MDIO Bus: probed
[ 1.883958] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 1.890386] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 1.902871] libphy: 4a101000.mdio: probed
[ 1.907334] davinci_mdio 4a101000.mdio: phy[0]: device
4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 1.919152] cpsw 4a100000.ethernet: Detected MACID = 00:1e:ac:3f:09:fb
[ 1.934445] mousedev: PS/2 mouse device common for all mice
[ 1.940342] i2c /dev entries driver
[ 1.947548] omap_hsmmc 48060000.mmc: GPIO lookup for consumer cd
[ 1.954046] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup
[ 1.960974] of_get_named_gpiod_flags: parsed 'cd-gpios' property of
node '/ocp/mmc@48060000[0]' - status (0)
[ 1.971512] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 1.976455] omap_hsmmc 48060000.mmc: GPIO lookup for consumer wp
[ 1.982781] omap_hsmmc 48060000.mmc: using device tree for GPIO lookup
[ 1.989707] of_get_named_gpiod_flags: can't parse 'wp-gpios' property
of node '/ocp/mmc@48060000[0]'
[ 1.999367] of_get_named_gpiod_flags: can't parse 'wp-gpio' property
of node '/ocp/mmc@48060000[0]'
[ 2.008990] omap_hsmmc 48060000.mmc: using lookup tables for GPIO lookup
[ 2.016090] omap_hsmmc 48060000.mmc: lookup for GPIO wp failed
[ 2.087564] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer cd
[ 2.094053] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup
[ 2.100943] of_get_named_gpiod_flags: can't parse 'cd-gpios' property
of node '/ocp/mmc@481d8000[0]'
[ 2.110612] of_get_named_gpiod_flags: can't parse 'cd-gpio' property
of node '/ocp/mmc@481d8000[0]'
[ 2.120174] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup
[ 2.127281] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed
[ 2.133437] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp
[ 2.139805] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup
[ 2.146708] of_get_named_gpiod_flags: can't parse 'wp-gpios' property
of node '/ocp/mmc@481d8000[0]'
[ 2.156344] of_get_named_gpiod_flags: can't parse 'wp-gpio' property
of node '/ocp/mmc@481d8000[0]'
[ 2.165883] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup
[ 2.172927] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed
[ 2.232597] mmc0: host does not support reading read-only switch,
assuming write-enable
[ 2.243488] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.251191] of_get_named_gpiod_flags: parsed 'enable-gpios' property
of node '/clk_mcasp0[0]' - status (0)
[ 2.263653] oprofile: no performance counters
[ 2.270707] oprofile: using timer interrupt.
[ 2.276248] Initializing XFRM netlink socket
[ 2.281377] NET: Registered protocol family 10
[ 2.291966] mmc0: new high speed SDHC card at address 1234
[ 2.302132] random: fast init done
[ 2.308199] mmcblk0: mmc0:1234 SA08G 7.29 GiB
[ 2.322091] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.332493] NET: Registered protocol family 17
[ 2.337446] NET: Registered protocol family 15
[ 2.342699] Key type dns_resolver registered
[ 2.347715] omap_voltage_late_init: Voltage driver support not added
[ 2.354483] sr_dev_init: No voltage domain specified for
smartreflex0. Cannot initialize
[ 2.362983] sr_dev_init: No voltage domain specified for
smartreflex1. Cannot initialize
[ 2.372656] ThumbEE CPU extension supported.
[ 2.377320] Registering SWP/SWPB emulation handler
[ 2.382373] SmartReflex Class3 initialized
[ 2.388519] mmcblk0: p1 p2
[ 2.440148] mmc1: new high speed MMC card at address 0001
[ 2.451863] mmcblk1: mmc1:0001 MMC02G 1.79 GiB
[ 2.461788] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
[ 2.471161] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
[ 2.486071] mmcblk1: p1 p2
[ 2.521581] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 2.528970] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 2.542234] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 2.550686] hctosys: unable to open rtc device (rtc0)
[ 2.556143] sr_init: No PMIC hook to init smartreflex
[ 2.561835] sr_init: platform driver register failed for SR
[ 2.613560] net eth0: initializing cpsw version 1.12 (0)
[ 2.714619] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY
driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=-1)
[ 2.739234] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.844649] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full -
flow control rx/tx
[ 5.864019] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5.895757] IP-Config: Complete:
[ 5.899203] device=eth0, hwaddr=00:1e:ac:3f:09:fb,
ipaddr=10.1.1.24, mask=255.255.255.0, gw=10.1.1.1
[ 5.909648] host=epos, domain=, nis-domain=(none)
[ 5.915169] bootserver=10.1.1.15, rootserver=10.1.1.15, rootpath=
[ 5.959706] VFS: Mounted root (nfs filesystem) on device 0:14.
[ 5.969463] devtmpfs: mounted
[ 5.976916] Freeing unused kernel memory: 1024K (c0b00000 - c0c00000)
Mount failed for selinuxfs on /sys/fs/selinux: No such file or directory
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
calling: info
[....] Starting the hotplug events dispatcher: udevd[ 9.279345]
systemd-udevd[184]: starting version 215
. ok
[....] Synthesizing the initial hotplug events...calling: trigger
[ 11.047645] of_get_named_gpiod_flags: parsed 'gpios' property of node
'/leds/led@2[0]' - status (0)
[ 11.059368] of_get_named_gpiod_flags: parsed 'gpios' property of node
'/leds/led@3[0]' - status (0)
[ 11.070329] of_get_named_gpiod_flags: parsed 'gpios' property of node
'/leds/led@4[0]' - status (0)
[ 11.080736] of_get_named_gpiod_flags: parsed 'gpios' property of node
'/leds/led@5[0]' - status (0)
[ 11.410289] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout
60 sec
[ 11.505228] Unhandled fault: external abort on non-linefetch (0x1028)
at 0xf9e3e044
[ 11.513311] pgd = db7d4000
[ 11.516161] [f9e3e044] *pgd=44e11452(bad)
[ 11.520418] Internal error: : 1028 [#1] SMP ARM
[ 11.525191] Modules linked in: rtc_omap(+) omap_wdt leds_gpio led_class
[ 11.532216] CPU: 0 PID: 213 Comm: udevd Not tainted
4.8.0-rc1-00022-gcd80425 #4
[ 11.539902] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 11.546311] task: db7cf240 task.stack: db7d0000
[ 11.551100] PC is at omap_hwmod_read+0x14/0x28
[ 11.555783] LR is at omap_rtc_wait_not_busy+0x1c/0x44
[ 11.561101] pc : [<c01218b4>] lr : [<c0123174>] psr: 40030093
[ 11.561101] sp : db7d1c30 ip : 00000000 fp : c01857a4
[ 11.573172] r10: 00000000 r9 : db7d0000 r8 : 00000004
[ 11.578669] r7 : c0c228fc r6 : c0c81de8 r5 : c0c22074 r4 : 00000032
[ 11.585534] r3 : f9e3e000 r2 : db7cf240 r1 : f9e3e044 r0 : c0c22074
[ 11.592402] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM
Segment none
[ 11.599999] Control: 10c5387d Table: 9b7d4019 DAC: 00000051
[ 11.606044] Process udevd (pid: 213, stack limit = 0xdb7d0218)
[ 11.612180] Stack: (0xdb7d1c30 to 0xdb7d2000)
[ 11.616769] 1c20: c0c22074 00000003 c0c14cbc c01231e8
[ 11.625378] 1c40: c0c22074 c0120ec8 c0c22074 00000020 c0c14cbc
c012107c db7d0000 00000000
[ 11.633986] 1c60: a0030093 00000003 c0c22074 00000000 c0cc38b4
c0121300 00000001 00000000
[ 11.642594] 1c80: c01219fc c0c22074 c0c220d4 a0030013 c0c02100
c0121a08 00000000 00000000
[ 11.651203] 1ca0: db177180 c0122a40 db17a810 db17a8a0 c0122a94
c0122aa4 db17a810 db17a8a0
[ 11.659810] 1cc0: c0122a94 c0537a7c db17a810 c0122a94 db150c10
c0537ad0 db17a810 c0122a94
[ 11.668419] 1ce0: db150c10 c05391a4 db17a8fc c0c029cc db17a8a0
60030013 c0539548 fffffffe
[ 11.677027] 1d00: 00000000 00000008 25fd0aa8 db17a810 db17a8a0
00000004 60030013 00000000
[ 11.685635] 1d20: 00000008 25fd0aa8 bf010448 c0539558 da02f450
db17a810 db17a800 fffffffe
[ 11.694244] 1d40: 00000000 bf00fa94 bf0103b0 db17a810 db17a810
bf0103b0 db17a810 db17a810
[ 11.702852] 1d60: bf0103b0 fffffdfb 00000000 c05306f8 db17a810
c1495fd8 c1495fe0 bf0103b0
[ 11.711461] 1d80: 00000000 c052e8b0 db17a810 bf0103b0 db17a844
c0c8d3e8 00000000 00000001
[ 11.720069] 1da0: 25fd0aa8 c052ea1c 00000000 bf0103b0 c052e968
c052cbf8 db081ea4 db17cfd0
[ 11.728679] 1dc0: bf0103b0 db797b00 00000000 c052de9c bf010334
bf012000 db7949c0 bf0103b0
[ 11.737288] 1de0: bf012000 db7949c0 bf010400 c052f794 bf010400
bf012000 db7949c0 c010186c
[ 11.745897] 1e00: 00000000 60030013 db000080 024000c0 00000040
c018f260 c0c81ee0 c0cbdd18
[ 11.754506] 1e20: db000080 c01a9408 db7949c0 c0281d40 db7949c0
c0191fe4 c0cbdd18 c0c029cc
[ 11.763116] 1e40: c01d2c04 bf010400 c0c029cc c0cbeb70 bf010400
c0c029cc db7949c0 bf010400
[ 11.771726] 1e60: da02f580 c022f274 c0c81ee0 c0c029cc c0cbdb9a
c0c029cc c0cbeb70 c01d2c50
[ 11.780336] 1e80: bf01040c 00007fff bf010400 c01d0124 00000000
c14731a4 bf010554 bf010644
[ 11.788944] 1ea0: bf01061c e0ad5ca0 bf01040c 00000000 00000000
db7d1f3c daca26c4 c029c008
[ 11.797554] 1ec0: 00000003 00000000 00000000 00000000 00000000
00000000 00000000 00000000
[ 11.806161] 1ee0: 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000
[ 11.814770] 1f00: 7fffffff 00000000 00000006 b6e2a9f8 0000017b
7fffffff 00000000 00000000
[ 11.823378] 1f20: 0005e4e0 c01d3240 7fffffff 00000000 00000003
0000a77d db621940 e0ace000
[ 11.831987] 1f40: 0000a77d 00000000 b66d3000 e0ace000 0000a77d
e0ad54f8 e0ad52fd e0ad8150
[ 11.840596] 1f60: 00001644 000019b4 00000000 00000000 00000000
00000f64 00000031 00000032
[ 11.849204] 1f80: 00000017 00000014 00000012 00000000 00000000
bea11004 00000000 c0107a04
[ 11.857812] 1fa0: db7d0000 c0107860 00000000 bea11004 00000006
b6e2a9f8 00000000 00000000
[ 11.866419] 1fc0: 00000000 bea11004 00000000 0000017b 00020000
00037f78 00050048 0005e4e0
[ 11.875028] 1fe0: bea10ee0 bea10ed0 b6e24c4b b6f2fb42 800e0030
00000006 3b3a3938 3f3e3d3c
[ 11.883646] [<c01218b4>] (omap_hwmod_read) from [<c0123174>]
(omap_rtc_wait_not_busy+0x1c/0x44)
[ 11.892786] [<c0123174>] (omap_rtc_wait_not_busy) from [<c01231e8>]
(omap_hwmod_rtc_unlock+0x18/0x4c)
[ 11.902471] [<c01231e8>] (omap_hwmod_rtc_unlock) from [<c0120ec8>]
(_write_sysconfig+0x34/0xa4)
[ 11.911607] [<c0120ec8>] (_write_sysconfig) from [<c012107c>]
(_enable_sysc+0x144/0x238)
[ 11.920105] [<c012107c>] (_enable_sysc) from [<c0121300>]
(_enable+0x190/0x2c0)
[ 11.927784] [<c0121300>] (_enable) from [<c0121a08>]
(omap_hwmod_enable+0x28/0x48)
[ 11.935737] [<c0121a08>] (omap_hwmod_enable) from [<c0122a40>]
(omap_device_enable+0x3c/0x90)
[ 11.944691] [<c0122a40>] (omap_device_enable) from [<c0122aa4>]
(_od_runtime_resume+0x10/0x38)
[ 11.953749] [<c0122aa4>] (_od_runtime_resume) from [<c0537a7c>]
(__rpm_callback+0x2c/0x60)
[ 11.962431] [<c0537a7c>] (__rpm_callback) from [<c0537ad0>]
(rpm_callback+0x20/0x80)
[ 11.970568] [<c0537ad0>] (rpm_callback) from [<c05391a4>]
(rpm_resume+0x4d0/0x838)
[ 11.978521] [<c05391a4>] (rpm_resume) from [<c0539558>]
(__pm_runtime_resume+0x4c/0x64)
[ 11.986950] [<c0539558>] (__pm_runtime_resume) from [<bf00fa94>]
(omap_rtc_probe+0xf8/0x440 [rtc_omap])
[ 11.996835] [<bf00fa94>] (omap_rtc_probe [rtc_omap]) from
[<c05306f8>] (platform_drv_probe+0x4c/0xb0)
[ 12.006521] [<c05306f8>] (platform_drv_probe) from [<c052e8b0>]
(driver_probe_device+0x208/0x2c0)
[ 12.015839] [<c052e8b0>] (driver_probe_device) from [<c052ea1c>]
(__driver_attach+0xb4/0xb8)
[ 12.024701] [<c052ea1c>] (__driver_attach) from [<c052cbf8>]
(bus_for_each_dev+0x6c/0xa0)
[ 12.033290] [<c052cbf8>] (bus_for_each_dev) from [<c052de9c>]
(bus_add_driver+0x18c/0x214)
[ 12.041970] [<c052de9c>] (bus_add_driver) from [<c052f794>]
(driver_register+0x78/0xf8)
[ 12.050379] [<c052f794>] (driver_register) from [<c010186c>]
(do_one_initcall+0x3c/0x178)
[ 12.058981] [<c010186c>] (do_one_initcall) from [<c022f274>]
(do_init_module+0x5c/0x1d0)
[ 12.067491] [<c022f274>] (do_init_module) from [<c01d2c50>]
(load_module+0x1d78/0x218c)
[ 12.075900] [<c01d2c50>] (load_module) from [<c01d3240>]
(SyS_finit_module+0x8c/0x9c)
[ 12.084132] [<c01d3240>] (SyS_finit_module) from [<c0107860>]
(ret_fast_syscall+0x0/0x1c)
[ 12.092723] Code: e3130c01 e590305c e0831001 1a000001 (e5910000)
[ 12.099132] ---[ end trace 8e02380e815dab7c ]---
[ 12.263211] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 12.271340] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 12.279178] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 12.286942] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 12.294703] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 14.317229] [drm] Initialized drm 1.1.0 20060810
[ 14.658136] simple_card_utils: module license 'unspecified' taints
kernel.
[ 14.717966] simple_card_utils: Unknown symbol snd_soc_of_parse_daifmt
(err 0)
[ 14.725751] simple_card_utils: Unknown symbol
snd_soc_of_parse_card_name (err 0)
done.
[ 14.776421] random: crng init done
[....] Waiting for /dev to be fully populated...calling: settle
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
