On Friday 05 August 2016 02:31 PM, Lee Jones wrote:
On Fri, 05 Aug 2016, Keerthy wrote:
On Friday 05 August 2016 01:33 PM, Lee Jones wrote:
On Wed, 29 Jun 2016, Keerthy wrote:
The LP873X chip is a power management IC for Portable Navigation Systems
and Tablet Computing devices. It contains the following components:
- Regulators.
- Configurable General Purpose Output Signals(GPO).
PMIC interacts with the main processor through i2c. PMIC has
couple of LDOs(Linear Regulators), couple of BUCKs (Step-Down DC-DC
Converter Cores) and GPOs(General Purpose Output Signals).
Signed-off-by: Keerthy <j-keerthy@xxxxxx>
---
Changes in v4:
* Added Author.
* Added the mfd_cell for gpio.
Changes in v3:
* Reordered the probe code.
* Fixed Typo in Kconfig description.
* Removed unused member from struct lp873x.
drivers/mfd/Kconfig | 14 +++
drivers/mfd/Makefile | 2 +
drivers/mfd/lp873x.c | 99 +++++++++++++++++
include/linux/mfd/lp873x.h | 264 +++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 379 insertions(+)
create mode 100644 drivers/mfd/lp873x.c
create mode 100644 include/linux/mfd/lp873x.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9987d86..e68ac28 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1221,6 +1221,20 @@ config MFD_TPS65217
This driver can also be built as a module. If so, the module
will be called tps65217.
+config MFD_LP873X
Nicer as MFD_TI_LP873X I think.
+ tristate "TI LP873X Power Management IC"
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ If you say yes here then you get support for the LP873X series of
+ power management integrated circuits(PMIC).
Power Management Integrated Circuits (PMIC).
Okay
+ These include voltage regulators, Thermal protection, Configurable
+ general purpose outputs(GPO) that are used in portable devices.
Some here. Please standardise your capitalisation.
Okay
+ This driver can also be built as a module. If so, the module
+ will be called lp873x.
+
config MFD_TPS65218
tristate "TI TPS65218 Power Management chips"
depends on I2C
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2ba3ba3..7d9b965 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -22,6 +22,8 @@ obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o
+obj-$(CONFIG_MFD_LP873X) += lp873x.o
+
obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
obj-$(CONFIG_MFD_TI_AM335X_TSCADC) += ti_am335x_tscadc.o
diff --git a/drivers/mfd/lp873x.c b/drivers/mfd/lp873x.c
new file mode 100644
index 0000000..54ed0ce
--- /dev/null
+++ b/drivers/mfd/lp873x.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author: Keerthy <j-keerthy@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/lp873x.h>
+
+static const struct regmap_config lp873x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = LP873X_REG_MAX,
+};
+
+static const struct mfd_cell lp873x_cells[] = {
+ { .name = "lp873x-regulator", },
+ { .name = "lp873x-gpio", },
+};
+
+static int lp873x_probe(struct i2c_client *client,
+ const struct i2c_device_id *ids)
+{
+ struct lp873x *lp873;
+ int ret;
+ unsigned int otpid;
+
+ lp873 = devm_kzalloc(&client->dev, sizeof(*lp873), GFP_KERNEL);
+ if (!lp873)
+ return -ENOMEM;
+
+ lp873->dev = &client->dev;
+
+ lp873->regmap = devm_regmap_init_i2c(client, &lp873x_regmap_config);
+ if (IS_ERR(lp873->regmap)) {
+ ret = PTR_ERR(lp873->regmap);
+ dev_err(lp873->dev, "Failed to initialize register map: %d\n",
+ ret);
Nit: I'd prefer you break after "->dev,".
Okay
+ return ret;
+ }
+
+ mutex_init(&lp873->lp873_lock);
How many locks do you have in 'struct lp873x'?
I suggest that 'lock' will do fine.
Okay.
+ ret = regmap_read(lp873->regmap, LP873X_REG_OTP_REV, &otpid);
+ if (ret) {
+ dev_err(lp873->dev, "Failed to read OTP ID\n");
+ return ret;
+ }
+
+ lp873->rev = otpid & LP873X_OTP_REV_OTP_ID;
+ i2c_set_clientdata(client, lp873);
+ ret = mfd_add_devices(lp873->dev, PLATFORM_DEVID_AUTO, lp873x_cells,
+ ARRAY_SIZE(lp873x_cells), NULL, 0, NULL);
+
+ return ret;
+}
+
+static const struct of_device_id of_lp873x_match_table[] = {
+ { .compatible = "ti,lp8733", },
+ { .compatible = "ti,lp8732", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, of_lp873x_match_table);
+
+static const struct i2c_device_id lp873x_id_table[] = {
+ { "lp873x", LP873X },
+ { "lp8732", LP873X },
+ { "lp8733", LP873X },
Do you use these IDs at any point?
I have lp8733 and lp8732 at the moment. They are register exact but
different parts none the less. Hence having separate strings. As of now no
differences seen in gpio/regulator modules so not using them anywhere.
I have a patch-set pending on the I2C list that removes all unused
'struct i2c_device_id' tables. To identify which ones are in use and
which ones can be removed, it would help if you could remove the
unused .id field.
I guess you are referring to this:
http://www.gossamer-threads.com/lists/linux/kernel/2457552
I applied the above series and i see that by using driver_new in lp873x
MFD driver i no longer need the mandatory i2c_device_id. Thanks.
I will send a series on top of your i2c set v5 without any unused
device_id. I will add a dependency on your set.
Thanks and Regards,
Keerthy
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
