On Friday 05 August 2016 01:35 PM, Lee Jones wrote:
On Wed, 29 Jun 2016, Keerthy wrote:
The lp873x series of PMICs have a bunch of regulators and a couple
of GPO(General Purpose Outputs).
Add information for the mfd and regulator drivers.
Nit: s/mfd/MFD/
Okay.
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Keerthy <j-keerthy@xxxxxx>
---
Changes in v4:
* Added the GPIO properties.
Changes in v3:
* Changed the example node lable to pmic from lp8733.
Documentation/devicetree/bindings/mfd/lp873x.txt | 59 ++++++++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt
diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
new file mode 100644
index 0000000..1377c25
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lp873x.txt
@@ -0,0 +1,59 @@
+TI LP873X MFD driver
"PMIC MFD" or "MFD PMIC"
+Required properties:
+ - compatible: "ti,lp8732", "ti,lp8733"
+ - reg: I2C slave address.
+ - gpio-controller : Marks the device node as a GPIO Controller.
+ - #gpio-cells : Should be two. The first cell is the pin number and
+ the second cell is used to specify flags.
+ See ../gpio/gpio.txt for more information.
+ - regulators: : List of child nodes that specify the regulator
+ initialization data.
Please standardise your formatting here. Sometimes you do ":", other
times you do " :", and oddly ": :".
Okay sure.
+Example:
+
+pmic: lp8733@60 {
+ compatible = "ti,lp8733";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ regulators {
+ lp8733_buck0: buck0 {
+ regulator-name = "lp8733-buck0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <1500000>;
+ regulator-max-microamp = <4000000>;
+ regulator-ramp-delay = <10000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ lp8733_buck1: buck1 {
+ regulator-name = "lp8733-buck1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-min-microamp = <1500000>;
+ regulator-max-microamp = <4000000>;
+ regulator-ramp-delay = <10000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ lp8733_ldo0: ldo0 {
+ regulator-name = "lp8733-ldo0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ lp8733_ldo1: ldo1 {
+ regulator-name = "lp8733-ldo1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+};
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
