Hi! > > CONFIG_HSI breaks power management completely, so power management > > with modem will be another topic. > > Sebastian, any idea why power management does not work for HSI? > > > > > > In the meantime, I found what is causing the rention mode to break for > > > > > me: CONFIG_HSI (aka wireless modem support). With HSI off, it seems to work. > > > > > > > > > > I still get problems with the camera button, in config similar to > > > > > defconfig. For some reason, I'm even getting (autorepeating) ^@ on > > > > > console. As long as I hold camera button down, I even get it into off > > > > > mode for brief period. > > > > > > > > Ok, if I turn off CONFIG_KEYBOARD_GPIO, I get it into off > > > > mode... once per screen blank, for about a second. (Does CONFIG_KEYBOARD_GPIO also cause > > > > problems for you?) > > > > > > > > Any idea why it enters off mode only once after each screenblank? > > > > > > After disabling CONFIG_PROVE_LOCKING, loading the LCD modules, and > > > blanking the screen, my n900 hits off mode just fine about once > > > a second. Sounds like you still have some extra devices enabled > > > causing it. > > > > I checked again... also with vanilla 4.6-rc2 to double check... same effect. > > > > Aha, got it... cat-ing /sys/kernel/debug/pm_debug/count breaks the > > off mode. If I don't do that (tm), it seems to work way better. > > So what is result? Is power management working for CONFIG_KEYBOARD_GPIO? camera and unlock button GPIOs seem to break the powermanagement, too. I disabled it for now. Next hint I got from Sebastian was that I may need to enable power management in /sys. pavel@n900:/my/tui/ofone$ cat /sys/devices/platform/68000000.ocp/48058000.ssi-controller/power/runtime_status active pavel@n900:/my/tui/ofone$ cat /sys/devices/platform/68000000.ocp/48058000.ssi-controller/power/autosuspend_delay_ms cat: /sys/devices/platform/68000000.ocp/48058000.ssi-controller/power/autosuspend_delay_ms: Input/output error root@n900:/my/tui/ofone# cat /sys/devices/platform/68000000.ocp/48058000.ssi-controller/power/control auto I could not get it to sleep :-(. Best regards, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html