Hi! > > > > > gzipped config is attached. > > > > > > > > > > Note that I'm still using NOLO. I enabled the sleep, then went to > > > > > runlevel 1. LEDs still stay on, 55mA power consumption. That was with > > > > > 1 in off_mode. > > > > > > > > Nothing idling for me with your .config.. And it seems slower to boot > > > > compared to omap2plus_defconfig? Maybe because of the extra GPIO > > > > interrupts? > > > > > > Extra interrupts only happen when enable_off_mode is 1, so that should > > > not be an issue during boot. > > > > OK maybe it's just the extra driver probe time then. > > Ok, I did try to minimize config differences. I'm still booting from > NOLO. Now I'm doing the tests from init=... boot. idlest1_core > blocking bits says 0042. But the LEDs still don't blink. > > I made config with pretty minimal differences from defconfig (making > required drivers =y, lockdep off so that video works). > > Do you think you could try with my config? Ok, it works now. I was doing tests in daylight so it was poorly visible. The right part of keyboard stays lit (but that's expected AFAICT), but the left part blinks. Thanks! Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
