Re: [PATCH 3/8] mfd: twl-core: Rename TWL4030_CORE Kconfig option to TWL_CORE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 29 Mar 2016, Paul Kocialkowski wrote:

> Since the twl-core mfd driver is not limited to twl4030 support, but also
> supports other chips of the TWL family, it makes sense to rename its matching
> Kconfig opton to a non-model-specific name.

No, it doesn't.  The naming convention is; unless there was already
forethought to make the name generic, it should be kept as the first
supported device i.e. in this case TWL4030.

It's also helpful if you Cc *all* of the maintainers for subsystems
you are attempting to make changes in.

> Signed-off-by: Paul Kocialkowski <contact@xxxxxxxx>
> ---
>  arch/arm/mach-omap2/Kconfig     | 2 +-
>  arch/arm/mach-omap2/Makefile    | 2 +-
>  arch/arm/mach-omap2/pm.h        | 2 +-
>  arch/arm/plat-omap/Kconfig      | 2 +-
>  drivers/gpio/Kconfig            | 2 +-
>  drivers/iio/adc/Kconfig         | 4 ++--
>  drivers/input/keyboard/Kconfig  | 2 +-
>  drivers/input/misc/Kconfig      | 4 ++--
>  drivers/mfd/Kconfig             | 6 +++---
>  drivers/mfd/Makefile            | 2 +-
>  drivers/mfd/twl4030-irq.c       | 6 +++---
>  drivers/phy/Kconfig             | 2 +-
>  drivers/power/Kconfig           | 2 +-
>  drivers/pwm/Kconfig             | 4 ++--
>  drivers/regulator/Kconfig       | 2 +-
>  drivers/rtc/Kconfig             | 2 +-
>  drivers/usb/phy/Kconfig         | 2 +-
>  drivers/video/backlight/Kconfig | 2 +-
>  drivers/watchdog/Kconfig        | 2 +-
>  include/linux/i2c/twl.h         | 4 ++--
>  sound/soc/codecs/Kconfig        | 2 +-
>  sound/soc/omap/Kconfig          | 4 ++--
>  22 files changed, 31 insertions(+), 31 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 0517f0c..ada4c7a1 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -124,7 +124,7 @@ config ARCH_OMAP2PLUS_TYPICAL
>  	select PM
>  	select REGULATOR
>  	select REGULATOR_FIXED_VOLTAGE
> -	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
> +	select TWL_CORE if ARCH_OMAP3 || ARCH_OMAP4
>  	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
>  	select VFP
>  	help
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 0ba6a0e..6eb680a 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -27,7 +27,7 @@ ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
>  obj-y += mcbsp.o
>  endif
>  
> -obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
> +obj-$(CONFIG_TWL_CORE) += omap_twl.o
>  obj-$(CONFIG_SOC_HAS_OMAP2_SDRC)	+= sdrc.o
>  
>  # SMP support ONLY available for OMAP4
> diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
> index b668719..bf4dac2 100644
> --- a/arch/arm/mach-omap2/pm.h
> +++ b/arch/arm/mach-omap2/pm.h
> @@ -123,7 +123,7 @@ static inline int omap_devinit_smartreflex(void)
>  static inline void omap_enable_smartreflex_on_init(void) {}
>  #endif
>  
> -#ifdef CONFIG_TWL4030_CORE
> +#ifdef CONFIG_TWL_CORE
>  extern int omap3_twl_init(void);
>  extern int omap4_twl_init(void);
>  extern int omap3_twl_set_sr_bit(bool enable);
> diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
> index d055db3..8631a45 100644
> --- a/arch/arm/plat-omap/Kconfig
> +++ b/arch/arm/plat-omap/Kconfig
> @@ -44,7 +44,7 @@ config POWER_AVS_OMAP
>  
>  config POWER_AVS_OMAP_CLASS3
>  	bool "Class 3 mode of Smartreflex Implementation"
> -	depends on POWER_AVS_OMAP && TWL4030_CORE
> +	depends on POWER_AVS_OMAP && TWL_CORE
>  	help
>  	  Say Y to enable Class 3 implementation of Smartreflex
>  
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 5f3429f..62ca9b4 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -933,7 +933,7 @@ config GPIO_TPS65912
>  
>  config GPIO_TWL4030
>  	tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
> -	depends on TWL4030_CORE
> +	depends on TWL_CORE
>  	help
>  	  Say yes here to access the GPIO signals of various multi-function
>  	  power management chips from Texas Instruments.
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index af4aea7..3360492 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -440,7 +440,7 @@ config TI_AM335X_ADC
>  
>  config TWL4030_MADC
>  	tristate "TWL4030 MADC (Monitoring A/D Converter)"
> -	depends on TWL4030_CORE
> +	depends on TWL_CORE
>  	help
>  	  This driver provides support for Triton TWL4030-MADC. The
>  	  driver supports both RT and SW conversion methods.
> @@ -450,7 +450,7 @@ config TWL4030_MADC
>  
>  config TWL6030_GPADC
>  	tristate "TWL6030 GPADC (General Purpose A/D Converter) Support"
> -	depends on TWL4030_CORE
> +	depends on TWL_CORE
>  	default n
>  	help
>  	  Say yes here if you want support for the TWL6030/TWL6032 General
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 509608c..9cfa09b 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -653,7 +653,7 @@ config KEYBOARD_TC3589X
>  
>  config KEYBOARD_TWL4030
>  	tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
> -	depends on TWL4030_CORE
> +	depends on TWL_CORE
>  	select INPUT_MATRIXKMAP
>  	help
>  	  Say Y here if your board use the keypad controller on
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 1f2337a..6abb6df 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -461,7 +461,7 @@ config INPUT_AXP20X_PEK
>  
>  config INPUT_TWL4030_PWRBUTTON
>  	tristate "TWL4030 Power button Driver"
> -	depends on TWL4030_CORE
> +	depends on TWL_CORE
>  	help
>  	  Say Y here if you want to enable power key reporting via the
>  	  TWL4030 family of chips.
> @@ -471,7 +471,7 @@ config INPUT_TWL4030_PWRBUTTON
>  
>  config INPUT_TWL4030_VIBRA
>  	tristate "Support for TWL4030 Vibrator"
> -	depends on TWL4030_CORE
> +	depends on TWL_CORE
>  	select MFD_TWL4030_AUDIO
>  	select INPUT_FF_MEMLESS
>  	help
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index eea61e3..28bfe3d 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1266,7 +1266,7 @@ config MFD_TPS80031
>  	  ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
>  	  Power Path from USB, 32K clock generator.
>  
> -config TWL4030_CORE
> +config TWL_CORE
>  	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
>  	depends on I2C=y
>  	select IRQ_DOMAIN
> @@ -1284,7 +1284,7 @@ config TWL4030_CORE
>  
>  config TWL4030_POWER
>  	bool "TI TWL4030 power resources"
> -	depends on TWL4030_CORE && ARM
> +	depends on TWL_CORE && ARM
>  	help
>  	  Say yes here if you want to use the power resources on the
>  	  TWL4030 family chips.  Most of these resources are regulators,
> @@ -1297,7 +1297,7 @@ config TWL4030_POWER
>  
>  config MFD_TWL4030_AUDIO
>  	bool "TI TWL4030 Audio"
> -	depends on TWL4030_CORE
> +	depends on TWL_CORE
>  	select MFD_CORE
>  	default n
>  
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 5eaa6465d..7daeab5 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -81,7 +81,7 @@ obj-$(CONFIG_MFD_TPS65912_SPI)  += tps65912-spi.o
>  obj-$(CONFIG_MFD_TPS80031)	+= tps80031.o
>  obj-$(CONFIG_MENELAUS)		+= menelaus.o
>  
> -obj-$(CONFIG_TWL4030_CORE)	+= twl-core.o twl4030-irq.o twl6030-irq.o
> +obj-$(CONFIG_TWL_CORE)	+= twl-core.o twl4030-irq.o twl6030-irq.o
>  obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
>  obj-$(CONFIG_MFD_TWL4030_AUDIO)	+= twl4030-audio.o
>  obj-$(CONFIG_TWL6040_CORE)	+= twl6040.o
> diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
> index 40e51b0..52dc294 100644
> --- a/drivers/mfd/twl4030-irq.c
> +++ b/drivers/mfd/twl4030-irq.c
> @@ -54,7 +54,7 @@
>   *	base + 8  .. base + 15	SIH for PWR_INT
>   *	base + 16 .. base + 33	SIH for GPIO
>   */
> -#define TWL4030_CORE_NR_IRQS	8
> +#define TWL_CORE_NR_IRQS	8
>  #define TWL4030_PWR_NR_IRQS	8
>  
>  /* PIH register offsets */
> @@ -693,7 +693,7 @@ int twl4030_init_irq(struct device *dev, int irq_num)
>  	 * the hwirqs numbers are defined contiguously from 1 to 15.
>  	 * Create only one domain for both.
>  	 */
> -	nr_irqs = TWL4030_PWR_NR_IRQS + TWL4030_CORE_NR_IRQS;
> +	nr_irqs = TWL4030_PWR_NR_IRQS + TWL_CORE_NR_IRQS;
>  
>  	irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
>  	if (IS_ERR_VALUE(irq_base)) {
> @@ -704,7 +704,7 @@ int twl4030_init_irq(struct device *dev, int irq_num)
>  	irq_domain_add_legacy(node, nr_irqs, irq_base, 0,
>  			      &irq_domain_simple_ops, NULL);
>  
> -	irq_end = irq_base + TWL4030_CORE_NR_IRQS;
> +	irq_end = irq_base + TWL_CORE_NR_IRQS;
>  
>  	/*
>  	 * Mask and clear all TWL4030 interrupts since initially we do
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 26566db..6193565 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -164,7 +164,7 @@ config TI_PIPE3
>  
>  config TWL4030_USB
>  	tristate "TWL4030 USB Transceiver Driver"
> -	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
> +	depends on TWL_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
>  	depends on USB_SUPPORT
>  	select GENERIC_PHY
>  	select USB_PHY
> diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
> index 421770d..cc5fe9a 100644
> --- a/drivers/power/Kconfig
> +++ b/drivers/power/Kconfig
> @@ -323,7 +323,7 @@ config CHARGER_MAX8903
>  
>  config CHARGER_TWL4030
>  	tristate "OMAP TWL4030 BCI charger driver"
> -	depends on IIO && TWL4030_CORE
> +	depends on IIO && TWL_CORE
>  	help
>  	  Say Y here to enable support for TWL4030 Battery Charge Interface.
>  
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index c182efc..6318f19 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -413,7 +413,7 @@ config  PWM_TIPWMSS
>  
>  config PWM_TWL
>  	tristate "TWL4030/6030 PWM support"
> -	depends on TWL4030_CORE
> +	depends on TWL_CORE
>  	help
>  	  Generic PWM framework driver for TWL4030/6030.
>  
> @@ -422,7 +422,7 @@ config PWM_TWL
>  
>  config PWM_TWL_LED
>  	tristate "TWL4030/6030 PWM support for LED drivers"
> -	depends on TWL4030_CORE
> +	depends on TWL_CORE
>  	help
>  	  Generic PWM framework driver for TWL4030/6030 LED terminals.
>  
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index c77dc08..b62b4b4 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -803,7 +803,7 @@ config REGULATOR_TPS80031
>  
>  config REGULATOR_TWL4030
>  	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
> -	depends on TWL4030_CORE
> +	depends on TWL_CORE
>  	help
>  	  This driver supports the voltage regulators provided by
>  	  this family of companion chips.
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index 3e84315..198ac54 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -462,7 +462,7 @@ config RTC_DRV_TWL92330
>  
>  config RTC_DRV_TWL4030
>  	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0"
> -	depends on TWL4030_CORE
> +	depends on TWL_CORE
>  	help
>  	  If you say yes here you get support for the RTC on the
>  	  TWL4030/TWL5030/TWL6030 family chips, used mostly with OMAP3 platforms.
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index c690474..2911b11 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -80,7 +80,7 @@ config SAMSUNG_USBPHY
>  
>  config TWL6030_USB
>  	tristate "TWL6030 USB Transceiver Driver"
> -	depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
> +	depends on TWL_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
>  	help
>  	  Enable this to support the USB OTG transceiver on TWL6030
>  	  family chips. This TWL6030 transceiver has the VBUS and ID GND
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 5ffa4b4..8d6e4e0 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -412,7 +412,7 @@ config BACKLIGHT_OT200
>  
>  config BACKLIGHT_PANDORA
>  	tristate "Backlight driver for Pandora console"
> -	depends on TWL4030_CORE
> +	depends on TWL_CORE
>  	help
>  	  If you have a Pandora console, say Y to enable the
>  	  backlight driver.
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index fb94765..4b24418 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -462,7 +462,7 @@ config COH901327_WATCHDOG
>  
>  config TWL4030_WATCHDOG
>  	tristate "TWL4030 Watchdog"
> -	depends on TWL4030_CORE
> +	depends on TWL_CORE
>  	select WATCHDOG_CORE
>  	help
>  	  Support for TI TWL4030 watchdog.  Say 'Y' here to enable the
> diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
> index 4e7ea5f..2decb190 100644
> --- a/include/linux/i2c/twl.h
> +++ b/include/linux/i2c/twl.h
> @@ -214,7 +214,7 @@ int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
>  int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
>  
>  /* Card detect Configuration for MMC1 Controller on OMAP4 */
> -#ifdef CONFIG_TWL4030_CORE
> +#ifdef CONFIG_TWL_CORE
>  int twl6030_mmc_card_detect_config(void);
>  #else
>  static inline int twl6030_mmc_card_detect_config(void)
> @@ -225,7 +225,7 @@ static inline int twl6030_mmc_card_detect_config(void)
>  #endif
>  
>  /* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */
> -#ifdef CONFIG_TWL4030_CORE
> +#ifdef CONFIG_TWL_CORE
>  int twl6030_mmc_card_detect(struct device *dev, int slot);
>  #else
>  static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> index 649e92a..009feb4 100644
> --- a/sound/soc/codecs/Kconfig
> +++ b/sound/soc/codecs/Kconfig
> @@ -134,7 +134,7 @@ config SND_SOC_ALL_CODECS
>  	select SND_SOC_TPA6130A2 if I2C
>  	select SND_SOC_TLV320DAC33 if I2C
>  	select SND_SOC_TS3A227E if I2C
> -	select SND_SOC_TWL4030 if TWL4030_CORE
> +	select SND_SOC_TWL4030 if TWL_CORE
>  	select SND_SOC_TWL6040 if TWL6040_CORE
>  	select SND_SOC_UDA134X
>  	select SND_SOC_UDA1380 if I2C
> diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
> index 5185a38..49af002 100644
> --- a/sound/soc/omap/Kconfig
> +++ b/sound/soc/omap/Kconfig
> @@ -85,7 +85,7 @@ config SND_OMAP_SOC_AM3517EVM
>  
>  config SND_OMAP_SOC_OMAP_TWL4030
>  	tristate "SoC Audio support for TI SoC based boards with twl4030 codec"
> -	depends on TWL4030_CORE && SND_OMAP_SOC
> +	depends on TWL_CORE && SND_OMAP_SOC
>  	select SND_OMAP_SOC_MCBSP
>  	select SND_SOC_TWL4030
>  	help
> @@ -117,7 +117,7 @@ config SND_OMAP_SOC_OMAP_ABE_TWL6040
>  
>  config SND_OMAP_SOC_OMAP3_PANDORA
>  	tristate "SoC Audio support for OMAP3 Pandora"
> -	depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
> +	depends on TWL_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
>  	select SND_OMAP_SOC_MCBSP
>  	select SND_SOC_TWL4030
>  	help

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux