On 03/04/2016 12:40 PM, Adam Ford wrote:
> Since there are a few different LogicPD Display Panel options,
> this patch creates two dtsi files which can be included based on
> which display panel is available.
>
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> ---
Dumb question: any reason we cannot do this as device tree overlays?
> arch/arm/boot/dts/logicpd-display_panel-15.dtsi | 47 +++++++++++++++++++++++
> arch/arm/boot/dts/logicpd-display_panel-28.dtsi | 40 +++++++++++++++++++
> arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts | 37 ++++--------------
> 3 files changed, 95 insertions(+), 29 deletions(-)
> create mode 100644 arch/arm/boot/dts/logicpd-display_panel-15.dtsi
> create mode 100644 arch/arm/boot/dts/logicpd-display_panel-28.dtsi
>
> diff --git a/arch/arm/boot/dts/logicpd-display_panel-15.dtsi b/arch/arm/boot/dts/logicpd-display_panel-15.dtsi
> new file mode 100644
> index 0000000..8594526d2
> --- /dev/null
> +++ b/arch/arm/boot/dts/logicpd-display_panel-15.dtsi
> @@ -0,0 +1,47 @@
> +/*
> + * Common file for LogicPD Type 15 Display Panel
> + *
> + * Note that the board specific DTS file needs to specify
> + * pinctrl and enable-gpios.
> + */
> +
> +/ {
> + aliases {
> + display0 = &lcd0;
> + };
> +
> + video_reg: video_reg {
> + compatible = "regulator-fixed";
> + regulator-name = "fixed-supply";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + lcd0: display@0 {
> + compatible = "panel-dpi";
> + label = "15";
> + status = "okay";
> + port {
> + lcd_in: endpoint {
> + remote-endpoint = <&dpi_out>;
> + };
> + };
> +
> + panel-timing {
> + clock-frequency = <9000000>;
> + hactive = <480>;
> + vactive = <272>;
> + hfront-porch = <3>;
> + hback-porch = <2>;
> + hsync-len = <42>;
> + vback-porch = <3>;
> + vfront-porch = <4>;
> + vsync-len = <11>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <1>;
> + };
> + };
> +};
> +
> diff --git a/arch/arm/boot/dts/logicpd-display_panel-28.dtsi b/arch/arm/boot/dts/logicpd-display_panel-28.dtsi
> new file mode 100644
> index 0000000..89ebeb9
> --- /dev/null
> +++ b/arch/arm/boot/dts/logicpd-display_panel-28.dtsi
> @@ -0,0 +1,40 @@
> +/*
> + * Common file for LogicPD Type 15 Display Panel
> + *
> + * Note that the board specific DTS file needs to specify
> + * pinctrl and enable-gpios.
> + */
> +
> +/ {
> + aliases {
> + display0 = &lcd0;
> + };
> +
> + lcd0: display@0 {
> + compatible = "panel-dpi";
> + label = "28";
> + status = "okay";
> + port {
> + lcd_in: endpoint {
> + remote-endpoint = <&dpi_out>;
> + };
> + };
> +
> + panel-timing {
> + clock-frequency = <9000000>;
> + hactive = <480>;
> + vactive = <272>;
> + hfront-porch = <3>;
> + hback-porch = <2>;
> + hsync-len = <42>;
> + vback-porch = <3>;
> + vfront-porch = <2>;
> + vsync-len = <11>;
> + hsync-active = <1>;
> + vsync-active = <1>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> + };
> +};
> +
> diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
> index 4ed3652..a9904f4 100644
> --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
> +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
> @@ -132,10 +132,6 @@
> };
>
> / {
> - aliases {
> - display0 = &lcd0;
> - };
> -
> video_reg: video_reg {
> compatible = "regulator-fixed";
> regulator-name = "fixed-supply";
> @@ -144,34 +140,9 @@
> };
>
> lcd0: display@0 {
> - compatible = "panel-dpi";
> - label = "28";
> - status = "okay";
> - /* default-on; */
> pinctrl-names = "default";
> pinctrl-0 = <&lcd_enable_pin>;
> enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
> - port {
> - lcd_in: endpoint {
> - remote-endpoint = <&dpi_out>;
> - };
> - };
> -
> - panel-timing {
> - clock-frequency = <9000000>;
> - hactive = <480>;
> - vactive = <272>;
> - hfront-porch = <3>;
> - hback-porch = <2>;
> - hsync-len = <42>;
> - vback-porch = <3>;
> - vfront-porch = <2>;
> - vsync-len = <11>;
> - hsync-active = <1>;
> - vsync-active = <1>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - };
> };
>
> bl: backlight {
> @@ -185,6 +156,14 @@
> };
> };
>
> +/*
> + * The current production Panel is Type 28.
> + * For people with older, Type 15 displays, include
> + * logicpd-display_panel-15.dtsi instead
> + */
> +#include "logicpd-display_panel-28.dtsi"
> +
> +
> &mmc1 {
> interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
> pinctrl-names = "default";
>
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
