On Wed, Feb 17, 2016 at 04:49:05PM +0200, Jyri Sarha wrote: > From: Jean-Francois Moine <moinejf@xxxxxxx> > > Two kinds of ports may be declared in a DT graph of ports: video and audio. > This patch accepts the port value from a video port as an alternative > to the video-ports property. > It also accepts audio ports in the case the transmitter is not used as > a slave encoder. > The new file include/sound/tda998x.h prepares to the definition of > a tda998x CODEC. > > Signed-off-by: Jean-Francois Moine <moinejf@xxxxxxx> > Signed-off-by: Jyri Sarha <jsarha@xxxxxx> > --- > .../devicetree/bindings/display/bridge/tda998x.txt | 51 ++++++++++++ > drivers/gpu/drm/i2c/tda998x_drv.c | 90 +++++++++++++++++++--- > include/sound/tda998x.h | 8 ++ > 3 files changed, 140 insertions(+), 9 deletions(-) > create mode 100644 include/sound/tda998x.h > > diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt > index e9e4bce..35f6a80 100644 > --- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt > +++ b/Documentation/devicetree/bindings/display/bridge/tda998x.txt > @@ -16,6 +16,35 @@ Optional properties: > > - video-ports: 24 bits value which defines how the video controller > output is wired to the TDA998x input - default: <0x230145> > + This property is not used when ports are defined. > + > +Optional nodes: > + > + - port: up to three ports. > + The ports are defined according to [1]. > + > + Video port. > + There may be only one video port. > + This one must contain the following property: > + > + - port-type: must be "rgb" This should be implied from the port unit address. In other words, port@0 is defined to be the rgb port. Now, if this is one of several modes for the video port, then that is a different story. > + and may contain the optional property: > + > + - reg: 24 bits value which defines how the video controller > + output is wired to the TDA998x input (video pins) > + When absent, the default value is <0x230145>. This is not really how reg is intended to be used. Can you explain how this value is determined? > + Audio ports. > + There may be one or two audio ports. > + These ones must contain the following properties: > + > + - port-type: must be "i2s" or "spdif" > + > + - reg: 8 bits value which defines how the audio controller > + output is wired to the TDA998x input (audio pins) Same here. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
