Commit 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe
error and driver unbind") introduced pm_runtime_reinit() that is used
to reinitialize PM runtime after -EPROBE_DEFER. This allows shutting
down the device after a failed probe.
However, for drivers using pm_runtime_use_autosuspend() this can cause
a state where suspend callback is never called after -EPROBE_DEFER.
On the following device driver probe, hardware state is different from
the PM runtime state causing omap_device to produce the following
error:
omap_device_enable() called from invalid state 1
And with omap_device and omap hardware being picky for PM, this will
block any deeper idle states in hardware.
The solution is to fix the drivers to follow the PM runtime documentation:
1. For sections of code that needs the device disabled, use
pm_runtime_put_sync_suspend() if pm_runtime_set_autosuspend() has
been set.
2. For driver exit code, use pm_runtime_dont_use_autosuspend() before
pm_runtime_put_sync() if pm_runtime_use_autosuspend() has been
set.
Fixes: 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe
error and driver unbind")
Cc: linux-i2c@xxxxxxxxxxxxxxx
Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Cc: Kevin Hilman <khilman@xxxxxxxxxxxx>
Cc: Nishanth Menon <nm@xxxxxx>
Cc: Rafael J. Wysocki <rafael@xxxxxxxxxx>
Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Cc: Tero Kristo <t-kristo@xxxxxx>
Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
Wolfram, I'd like to merge this along with other related fixes via
the ARM SoC tree if no objections, please review and ack if this
look OK to you.
---
drivers/i2c/busses/i2c-omap.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 08d26ba..13c4529 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1450,7 +1450,8 @@ omap_i2c_probe(struct platform_device *pdev)
err_unuse_clocks:
omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
- pm_runtime_put(omap->dev);
+ pm_runtime_dont_use_autosuspend(omap->dev);
+ pm_runtime_put_sync(omap->dev);
pm_runtime_disable(&pdev->dev);
err_free_mem:
@@ -1468,6 +1469,7 @@ static int omap_i2c_remove(struct platform_device *pdev)
return ret;
omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
