Hi!
> > > > ffdffe8d 48004a20 (fa004a20) cm_idlest1_core blocking bits: 00200072
> > > > 0000000d 48004a28 (fa004a28) cm_idlest3_core
> > > >
> > > > cm_idlest1_core changes periodicall often, to 00218072. The rest seems
> > > > constant.
> > >
> > > For cm_idlest1_core 42 is the answer.. Here you have bits 4 and 5
> > > blocking which is for OTG and it's PHY. That's a known issue with
> > > musb and setting pm_runtime_irq_safe() on the MUSB parent.
> > >
> > > If you do rmmod omap2430 and phy-twl4030usb chances are the LEDs will
> > > start going off assuming the McSPI bit goes low with WLAN idling.
> >
> > Ok, so I tried to compile kernel without omap2430/phy-twl4030usb
> > . That did not help. So I thought, ok, maybe rmmod is needed to
> > trigger some powersaving? But that is not exactly easy to do:
> >
> > pavel@n900:/my/tui/ofone$ sudo insmod /my/modules/omap2430.ko
> > pavel@n900:/my/tui/ofone$ sudo insmod /my/modules/phy-twl4030-usb.ko
> > pavel@n900:/my/tui/ofone$ sudo rmmod phy-twl4030-usb.ko
> > Error: Module phy_twl4030_usb is in use
> > pavel@n900:/my/tui/ofone$
> >
> > Any ideas what jumps to use the modules? Charger code?
>
> I tried a kernel without charger code, and no luck, rmmod fails the
> same way. dmesg says:
> [ 111.093078] wlan0: authenticated
> [ 111.097442] wlan0: associate with 06:27:22:f9:10:6a (try 1/3)
> [ 111.104553] wlan0: RX AssocResp from 06:27:22:f9:10:6a (capab=0x421
> status=0 aid=2)
> [ 111.104705] wlan0: AP has invalid WMM params (AIFSN=1 for ACI 2),
> will use 2
> [ 111.104736] wlan0: AP has invalid WMM params (AIFSN=1 for ACI 3),
> will use 2
> [ 111.256652] wlan0: associated
> [ 184.681427] HS USB OTG: no transceiver configured
> [ 184.681488] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed
> with status -517
> [ 184.681976] HS USB OTG: no transceiver configured
> [ 184.682006] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed
> with status -517
> [ 187.690338] twl4030_usb 48070000.i2c:twl@48:twl4030-usb:
> Initialized TWL4030 USB module
> [ 187.698303] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk
> combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
> [ 187.698333] musb-hdrc: MHDRC RTL version 1.400
> [ 187.698333] musb-hdrc: setup fifo_mode 4
> [ 187.698394] musb-hdrc: 28/31 max ep, 16384/16384 memory
> pavel@n900:/my/tui/ofone$
I added following hack to phy-twl4030-usb.c so that I could avoid
modules and module unloading problem. But still could not get it to
sleep :-(.
Pavel
diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index 3a707dd..ac3761b 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -532,6 +532,43 @@ static ssize_t twl4030_usb_vbus_show(struct device *dev,
}
static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL);
+static ssize_t twl4030_test_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct twl4030_usb *twl = dev_get_drvdata(dev);
+ int ret = -EINVAL;
+
+ mutex_lock(&twl->lock);
+ ret = sprintf(buf, "%s\n", "hello, world");
+ mutex_unlock(&twl->lock);
+
+ return ret;
+}
+
+static int twl4030_shutdown(struct twl4030_usb *twl);
+
+static ssize_t twl4030_test_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long tmp;
+
+ struct twl4030_usb *twl = dev_get_drvdata(dev);
+
+ mutex_lock(&twl->lock);
+ sscanf(buf, "%lX", &tmp);
+ printk("TWL HACK: tmp = 0x%lX\n", tmp);
+ mutex_unlock(&twl->lock);
+
+ if (tmp == 0xdead) {
+ printk("TWL HACK: killing hardware\n");
+ printk("TWL HACK: killing hardware = %d\n", twl4030_shutdown(twl));
+ }
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(test, 0664, twl4030_test_show, twl4030_test_store);
+
static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
{
struct twl4030_usb *twl = _twl;
@@ -710,6 +747,9 @@ static int twl4030_usb_probe(struct platform_device *pdev)
if (device_create_file(&pdev->dev, &dev_attr_vbus))
dev_warn(&pdev->dev, "could not create sysfs file\n");
+ if (device_create_file(&pdev->dev, &dev_attr_test))
+ dev_warn(&pdev->dev, "could not create sysfs file #2\n");
+
ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
pm_runtime_use_autosuspend(&pdev->dev);
@@ -745,14 +785,12 @@ static int twl4030_usb_probe(struct platform_device *pdev)
return 0;
}
-static int twl4030_usb_remove(struct platform_device *pdev)
+static int twl4030_shutdown(struct twl4030_usb *twl)
{
- struct twl4030_usb *twl = platform_get_drvdata(pdev);
int val;
pm_runtime_get_sync(twl->dev);
cancel_delayed_work(&twl->id_workaround_work);
- device_remove_file(twl->dev, &dev_attr_vbus);
/* set transceiver mode to power on defaults */
twl4030_usb_set_mode(twl, -1);
@@ -779,6 +817,17 @@ static int twl4030_usb_remove(struct platform_device *pdev)
return 0;
}
+
+static int twl4030_usb_remove(struct platform_device *pdev)
+{
+ struct twl4030_usb *twl = platform_get_drvdata(pdev);
+
+ device_remove_file(twl->dev, &dev_attr_vbus);
+ device_remove_file(twl->dev, &dev_attr_test);
+
+ return twl4030_shutdown(twl);
+}
+
#ifdef CONFIG_OF
static const struct of_device_id twl4030_usb_id_table[] = {
{ .compatible = "ti,twl4030-usb" },
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
