Re: [RFC 6/9] clk: ti: add support for omap4 module clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/01/2016 07:48 AM, Michael Turquette wrote:
Hi Tero,

Quoting Tero Kristo (2015-12-18 05:58:58)
Previously, hwmod core has been used for controlling the hwmod level
clocks. This has certain drawbacks, like being unable to share the
clocks for multiple users, missing usecounting and generally being
totally incompatible with common clock framework.

Add support for new clock type under the TI clock driver, which will
be used to convert all the existing hwmdo clocks to. This helps to
get rid of the clock related hwmod data from kernel and instead
parsing this from DT.

I'm really happy to see this series. Looks pretty good to me.

+static int _omap4_hwmod_clk_enable(struct clk_hw *hw)
+{
+       struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+       u32 val;
+       int timeout = 0;
+       int ret;
+
+       if (!clk->enable_bit)
+               return 0;
+
+       if (clk->clkdm) {
+               ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+               if (ret) {
+                       WARN(1,
+                            "%s: could not enable %s's clockdomain %s: %d\n",
+                            __func__, clk_hw_get_name(hw),
+                            clk->clkdm_name, ret);
+                       return ret;
+               }
+       }
+
+       val = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+
+       val &= ~OMAP4_MODULEMODE_MASK;
+       val |= clk->enable_bit;
+
+       ti_clk_ll_ops->clk_writel(val, clk->enable_reg);
+
+       /* Wait until module is enabled */
+       while (!_omap4_is_ready(val)) {
+               udelay(1);

This should really be a .prepare callback if you plan to keep the delays
in there.

If this is changed to a .prepare, then all OMAP power management is effectively ruined as all clocks are going to be enabled all the time. hwmod core doesn't support .prepare/.enable at the moment that well, and changing that is going to be a big burden (educated guess, haven't checked this yet)... The call chain that comes here is:

device driver -> pm_runtime -> hwmod_core -> hwmod_clk_enable / disable.

The delay within this function should usually be pretty short, just to wait that the module comes up from idle.

I recall the discussions regarding the udelays within clk_enable/disable calls, but what is the preferred approach then? Typically clk_enable/disable just becomes a NOP if it is not allowed to wait for hardware to complete transitioning before exiting the function.

-Tero


Regards,
Mike


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux