Hello Tony, On 10/20/2015 06:26 PM, Tony Lindgren wrote: > * Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx> [151019 08:39]: >> Hello, >> >> This series use the IOPAD pinmux macros for the remaining IGEP boards that >> still used the register offset instead of the physical address using these >> macros so the DTS matches what is in the Technical Reference Manual. >> >> The changes are only cosmetic since they make the DTS easier to read but >> does not change functionality. I built tested and compared the binary DTB >> MD5 checksum and both matches before and after the series applied: >> >> Before >> >> d7a56205bdc54365d49d9a90dfe3fafb am335x-base0033.dtb >> fa272fcdee65d7bf4c03bd5a6c5ec4fd omap3-igep0020.dtb >> ba65bf74d8c6ea8e7bd8face17179e6e omap3-igep0020-rev-f.dtb >> >> After >> >> d7a56205bdc54365d49d9a90dfe3fafb am335x-base0033.dtb >> fa272fcdee65d7bf4c03bd5a6c5ec4fd omap3-igep0020.dtb >> ba65bf74d8c6ea8e7bd8face17179e6e omap3-igep0020-rev-f.dtb > > Good idea to test the dtb checksums :) > :) > Applying all into omap-for-v4.4/dt thanks. > Thanks, I'm planning to convert the remaining OMAP dts but I'm quite busy this week and traveling the next one so that would have to wait for v4.5 > Tony > Best regards, -- Javier Martinez Canillas Open Source Group Samsung Research America -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
