This series implements the handling of a pending imprecise abort left behind by the bootloader/firmware running before Linux in the common ARM startup code. It turns pending imprecise aborts that may signal during the first unmasking of such aborts on the boot CPU into a non-faulting event and warns the user that the firmware of the machine might be buggy. Handling this in the common code makes sure that we only ignore already pending aborts and not those that may happen later during system boot/usage. It also allows to remove the custom fault handler from the 3 architectures that are known to have bad firmware/bootloaders. V2 adapts patch 1 to suggestions from Russell and Hauke and drops former patch 3 (ARM: mvebu: remove the workaround imprecise abort fault handler) as it has already been applied. Regards, Lucas Lucas Stach (3): ARM: catch pending imprecise abort on unmask ARM: OMAP2+: remove custom abort handler for t410 ARM: BCM5301X: remove workaround imprecise abort fault handler arch/arm/mach-bcm/bcm_5301x.c | 35 ----------------------------------- arch/arm/mach-omap2/pdata-quirks.c | 29 ----------------------------- arch/arm/mm/fault.c | 22 ++++++++++++++++++++++ arch/arm/mm/fault.h | 1 + arch/arm/mm/mmu.c | 3 ++- 5 files changed, 25 insertions(+), 65 deletions(-) -- 2.6.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
