Register with the USB OTG core. Since we don't support
OTG yet we just work as a dual-role device even
if device tree says "otg".
Use extcon framework to get VBUS/ID cable events and
kick the OTG state machine.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
drivers/usb/dwc3/core.c | 174 ++++++++++++++++++++++++++++++++++++++-
drivers/usb/dwc3/core.h | 7 ++
drivers/usb/dwc3/platform_data.h | 1 +
3 files changed, 181 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 064123e..2e36a9b 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -704,6 +704,152 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
return 0;
}
+/* --------------------- Dual-Role management ------------------------------- */
+
+static void dwc3_drd_fsm_sync(struct dwc3 *dwc)
+{
+ int id, vbus;
+
+ /* get ID */
+ id = extcon_get_cable_state(dwc->edev, "USB-HOST");
+ /* Host means ID == 0 */
+ id = !id;
+
+ /* get VBUS */
+ vbus = extcon_get_cable_state(dwc->edev, "USB");
+ dev_dbg(dwc->dev, "id %d vbus %d\n", id, vbus);
+
+ dwc->fsm->id = id;
+ dwc->fsm->b_sess_vld = vbus;
+ usb_otg_sync_inputs(dwc->fsm);
+}
+
+static int dwc3_drd_start_host(struct otg_fsm *fsm, int on)
+{
+ struct device *dev = usb_otg_fsm_to_dev(fsm);
+ struct dwc3 *dwc = dev_get_drvdata(dev);
+
+ dev_dbg(dwc->dev, "%s: %d\n", __func__, on);
+ if (on) {
+ dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
+ /* start the HCD */
+ usb_otg_start_host(fsm, true);
+ } else {
+ /* stop the HCD */
+ usb_otg_start_host(fsm, false);
+ }
+
+ return 0;
+}
+
+static int dwc3_drd_start_gadget(struct otg_fsm *fsm, int on)
+{
+ struct device *dev = usb_otg_fsm_to_dev(fsm);
+ struct dwc3 *dwc = dev_get_drvdata(dev);
+
+ dev_dbg(dwc->dev, "%s: %d\n", __func__, on);
+ if (on) {
+ dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+ dwc3_event_buffers_setup(dwc);
+
+ /* start the UDC */
+ usb_otg_start_gadget(fsm, true);
+ } else {
+ /* stop the UDC */
+ usb_otg_start_gadget(fsm, false);
+ }
+
+ return 0;
+}
+
+static struct otg_fsm_ops dwc3_drd_ops = {
+ .start_host = dwc3_drd_start_host,
+ .start_gadget = dwc3_drd_start_gadget,
+};
+
+static int dwc3_drd_notifier(struct notifier_block *nb,
+ unsigned long event, void *ptr)
+{
+ struct dwc3 *dwc = container_of(nb, struct dwc3, otg_nb);
+
+ dwc3_drd_fsm_sync(dwc);
+
+ return NOTIFY_DONE;
+}
+
+static int dwc3_drd_init(struct dwc3 *dwc)
+{
+ int ret, id, vbus;
+ struct usb_otg_caps *otgcaps = &dwc->otg_config.otg_caps;
+
+ otgcaps->otg_rev = 0;
+ otgcaps->hnp_support = false;
+ otgcaps->srp_support = false;
+ otgcaps->adp_support = false;
+ dwc->otg_config.fsm_ops = &dwc3_drd_ops;
+
+ if (!dwc->edev) {
+ dev_err(dwc->dev, "No extcon device found for OTG mode\n");
+ return -ENODEV;
+ }
+
+ dwc->otg_nb.notifier_call = dwc3_drd_notifier;
+ ret = extcon_register_notifier(dwc->edev, EXTCON_USB, &dwc->otg_nb);
+ if (ret < 0) {
+ dev_err(dwc->dev, "Couldn't register USB cable notifier\n");
+ return -ENODEV;
+ }
+
+ ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
+ &dwc->otg_nb);
+ if (ret < 0) {
+ dev_err(dwc->dev, "Couldn't register USB-HOST cable notifier\n");
+ ret = -ENODEV;
+ goto extcon_fail;
+ }
+
+ /* sanity check id & vbus states */
+ id = extcon_get_cable_state(dwc->edev, "USB-HOST");
+ vbus = extcon_get_cable_state(dwc->edev, "USB");
+ if (id < 0 || vbus < 0) {
+ dev_err(dwc->dev, "Invalid USB cable state. id %d, vbus %d\n",
+ id, vbus);
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ /* register as DRD device with OTG core */
+ dwc->fsm = usb_otg_register(dwc->dev, &dwc->otg_config);
+ if (IS_ERR(dwc->fsm)) {
+ ret = PTR_ERR(dwc->fsm);
+ if (ret == -ENOTSUPP)
+ dev_err(dwc->dev, "CONFIG_USB_OTG needed for dual-role\n");
+ else
+ dev_err(dwc->dev, "Failed to register with OTG core\n");
+
+ goto fail;
+ }
+
+ dwc3_drd_fsm_sync(dwc);
+
+ return 0;
+fail:
+ extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST, &dwc->otg_nb);
+extcon_fail:
+ extcon_unregister_notifier(dwc->edev, EXTCON_USB, &dwc->otg_nb);
+
+ return ret;
+}
+
+static void dwc3_drd_exit(struct dwc3 *dwc)
+{
+ usb_otg_unregister(dwc->dev);
+ extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST, &dwc->otg_nb);
+ extcon_unregister_notifier(dwc->edev, EXTCON_USB, &dwc->otg_nb);
+}
+
+/* -------------------------------------------------------------------------- */
+
static int dwc3_core_init_mode(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
@@ -727,13 +873,21 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
}
break;
case USB_DR_MODE_OTG:
- dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
+ ret = dwc3_drd_init(dwc);
+ if (ret) {
+ dev_err(dev, "limiting to peripheral only\n");
+ dwc->dr_mode = USB_DR_MODE_PERIPHERAL;
+ dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+ goto gadget_init;
+ }
+
ret = dwc3_host_init(dwc);
if (ret) {
dev_err(dev, "failed to initialize host\n");
return ret;
}
+gadget_init:
ret = dwc3_gadget_init(dwc);
if (ret) {
dev_err(dev, "failed to initialize gadget\n");
@@ -760,6 +914,7 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc)
case USB_DR_MODE_OTG:
dwc3_host_exit(dwc);
dwc3_gadget_exit(dwc);
+ dwc3_drd_exit(dwc);
break;
default:
/* do nothing */
@@ -843,6 +998,16 @@ static int dwc3_probe(struct platform_device *pdev)
hird_threshold = 12;
if (node) {
+ if (of_property_read_bool(node, "extcon"))
+ dwc->edev = extcon_get_edev_by_phandle(dev, 0);
+ else if (of_property_read_bool(dev->parent->of_node, "extcon"))
+ dwc->edev = extcon_get_edev_by_phandle(dev->parent, 0);
+
+ if (IS_ERR(dwc->edev)) {
+ dev_vdbg(dev, "couldn't get extcon device\n");
+ return -EPROBE_DEFER;
+ }
+
dwc->maximum_speed = of_usb_get_maximum_speed(node);
dwc->has_lpm_erratum = of_property_read_bool(node,
"snps,has-lpm-erratum");
@@ -887,6 +1052,13 @@ static int dwc3_probe(struct platform_device *pdev)
of_property_read_string(node, "snps,hsphy_interface",
&dwc->hsphy_interface);
} else if (pdata) {
+ if (pdata->extcon) {
+ dwc->edev = extcon_get_extcon_dev(pdata->extcon);
+ if (!dwc->edev) {
+ dev_vdbg(dev, "couldn't get extcon device\n");
+ return -EPROBE_DEFER;
+ }
+ }
dwc->maximum_speed = pdata->maximum_speed;
dwc->has_lpm_erratum = pdata->has_lpm_erratum;
if (pdata->lpm_nyet_threshold)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 0447788..5ca2b25 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -31,8 +31,10 @@
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
#include <linux/ulpi/interface.h>
+#include <linux/usb/otg-fsm.h>
#include <linux/phy/phy.h>
+#include <linux/extcon.h>
#define DWC3_MSG_MAX 500
@@ -753,6 +755,11 @@ struct dwc3 {
struct ulpi *ulpi;
+ struct extcon_dev *edev; /* USB cable events ID & VBUS */
+ struct notifier_block otg_nb; /* notifier for USB cable events */
+ struct otg_fsm *fsm;
+ struct usb_otg_config otg_config;
+
void __iomem *regs;
size_t regs_size;
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index d3614ec..b3b245c 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -47,4 +47,5 @@ struct dwc3_platform_data {
unsigned tx_de_emphasis:2;
const char *hsphy_interface;
+ const char *extcon; /* extcon name for USB cable events ID/VBUS */
};
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
