Re: [PATCH 3/7] gpio: omap: fix omap2_set_gpio_debounce

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 18, 2015 at 1:10 PM, Grygorii Strashko
<grygorii.strashko@xxxxxx> wrote:

> According to TRMs:
>
> Required input line stable =
>   (the value of the GPIO_DEBOUNCINGTIME[7:0].DEBOUNCETIME + 1) × 31,
> where the value of the GPIO_DEBOUNCINGTIME[7:0].DEBOUNCETIME bit field
> is from 0 to 255.
>
> But now omap2_set_gpio_debounce() will calculate debounce time and
> behave incorrectly in the following cases:
> 1) requested debounce time is !0 and <32
>    calculated DEBOUNCETIME = 0x1 == 62 us;
>    expected value of DEBOUNCETIME = 0x0 == 31us
> 2) requested debounce time is 0
>    calculated DEBOUNCETIME = 0x1 == 62 us;
>    expected: disable debounce and DEBOUNCETIME = 0x0
> 3) requested debounce time is >32 and <63
>    calculated DEBOUNCETIME = 0x0 and debounce will be disabled;
>    expected: enable debounce and DEBOUNCETIME = 0x1 == 62 us
>
> Hence, rework omap2_set_gpio_debounce() to fix above cases:
> 1) introduce local variable "enable" and use it to identify
> when debounce need to be enabled or disabled. Disable debounce
> if requested debounce time is 0.
> 2) use below formula for debounce time calculation:
>    debounce = (DIV_ROUND_UP(debounce, 31) - 1) & 0xFF;
>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>

Very hightech. Patch applied.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux