Remove board support files for 10 years discontinued VoiceBlue board.
Signed-off-by: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
---
arch/arm/mach-omap1/Kconfig | 7 -
arch/arm/mach-omap1/Makefile | 1 -
arch/arm/mach-omap1/board-voiceblue.c | 296 ---------------------
arch/arm/mach-omap1/include/mach/board-voiceblue.h | 19 --
4 files changed, 323 deletions(-)
delete mode 100644 arch/arm/mach-omap1/board-voiceblue.c
delete mode 100644 arch/arm/mach-omap1/include/mach/board-voiceblue.h
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index cdd05f2..afb80950 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -90,13 +90,6 @@ config MACH_OMAP_FSAMPLE
Support for TI OMAP 850 F-Sample board. Say Y here if you have such
a board.
-config MACH_VOICEBLUE
- bool "Voiceblue"
- depends on ARCH_OMAP1 && ARCH_OMAP15XX
- help
- Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
- such a board.
-
config MACH_OMAP_PALMTE
bool "Palm Tungsten E"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 3889b6c..0e8ea95 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o board-nand.o
obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o \
board-nand.o
-obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o
obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o
obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
deleted file mode 100644
index e960687..0000000
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-voiceblue.c
- *
- * Modified from board-generic.c
- *
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@xxxxx>
- *
- * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/mtd/physmap.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/smc91x.h>
-#include <linux/export.h>
-#include <linux/reboot.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/board-voiceblue.h>
-#include <mach/flash.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
-#include "common.h"
-
-static struct plat_serial8250_port voiceblue_ports[] = {
- {
- .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 1,
- .uartclk = 3686400,
- },
- {
- .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 1,
- .uartclk = 3686400,
- },
- {
- .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 1,
- .uartclk = 3686400,
- },
- {
- .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 1,
- .uartclk = 3686400,
- },
- { },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM1,
-};
-
-static int __init ext_uart_init(void)
-{
- if (!machine_is_voiceblue())
- return -ENODEV;
-
- voiceblue_ports[0].irq = gpio_to_irq(12);
- voiceblue_ports[1].irq = gpio_to_irq(13);
- voiceblue_ports[2].irq = gpio_to_irq(14);
- voiceblue_ports[3].irq = gpio_to_irq(15);
- serial_device.dev.platform_data = voiceblue_ports;
- return platform_device_register(&serial_device);
-}
-arch_initcall(ext_uart_init);
-
-static struct physmap_flash_data voiceblue_flash_data = {
- .width = 2,
- .set_vpp = omap1_set_vpp,
-};
-
-static struct resource voiceblue_flash_resource = {
- .start = OMAP_CS0_PHYS,
- .end = OMAP_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device voiceblue_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &voiceblue_flash_data,
- },
- .num_resources = 1,
- .resource = &voiceblue_flash_resource,
-};
-
-static struct smc91x_platdata voiceblue_smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
- .leda = RPC_LED_100_10,
- .ledb = RPC_LED_TX_RX,
-};
-
-static struct resource voiceblue_smc91x_resources[] = {
- [0] = {
- .start = OMAP_CS2_PHYS + 0x300,
- .end = OMAP_CS2_PHYS + 0x300 + 16,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- },
-};
-
-static struct platform_device voiceblue_smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .dev = {
- .platform_data = &voiceblue_smc91x_info,
- },
- .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources),
- .resource = voiceblue_smc91x_resources,
-};
-
-static struct platform_device *voiceblue_devices[] __initdata = {
- &voiceblue_flash_device,
- &voiceblue_smc91x_device,
-};
-
-static struct omap_usb_config voiceblue_usb_config __initdata = {
- .hmc_mode = 3,
- .register_host = 1,
- .register_dev = 1,
- .pins[0] = 2,
- .pins[1] = 6,
- .pins[2] = 6,
-};
-
-#define MACHINE_PANICED 1
-#define MACHINE_REBOOTING 2
-#define MACHINE_REBOOT 4
-static unsigned long machine_state;
-
-static int panic_event(struct notifier_block *this, unsigned long event,
- void *ptr)
-{
- if (test_and_set_bit(MACHINE_PANICED, &machine_state))
- return NOTIFY_DONE;
-
- /* Flash power LED */
- omap_writeb(0x78, OMAP_LPG1_LCR);
- omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */
-
- return NOTIFY_DONE;
-}
-
-static struct notifier_block panic_block = {
- .notifier_call = panic_event,
-};
-
-static int __init voiceblue_setup(void)
-{
- if (!machine_is_voiceblue())
- return -ENODEV;
-
- /* Setup panic notifier */
- atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
-
- return 0;
-}
-postcore_initcall(voiceblue_setup);
-
-static int wdt_gpio_state;
-
-void voiceblue_wdt_enable(void)
-{
- gpio_direction_output(0, 0);
- gpio_set_value(0, 1);
- gpio_set_value(0, 0);
- wdt_gpio_state = 0;
-}
-
-void voiceblue_wdt_disable(void)
-{
- gpio_set_value(0, 0);
- gpio_set_value(0, 1);
- gpio_set_value(0, 0);
- gpio_direction_input(0);
-}
-
-void voiceblue_wdt_ping(void)
-{
- if (test_bit(MACHINE_REBOOT, &machine_state))
- return;
-
- wdt_gpio_state = !wdt_gpio_state;
- gpio_set_value(0, wdt_gpio_state);
-}
-
-static void voiceblue_restart(enum reboot_mode mode, const char *cmd)
-{
- /*
- * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
- * "Global Software Reset Affects Traffic Controller Frequency".
- */
- if (cpu_is_omap5912()) {
- omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
- omap_writew(0x8, ARM_RSTCT1);
- }
-
- set_bit(MACHINE_REBOOT, &machine_state);
- voiceblue_wdt_enable();
- while (1) ;
-}
-
-EXPORT_SYMBOL(voiceblue_wdt_enable);
-EXPORT_SYMBOL(voiceblue_wdt_disable);
-EXPORT_SYMBOL(voiceblue_wdt_ping);
-
-static void __init voiceblue_init(void)
-{
- /* mux pins for uarts */
- omap_cfg_reg(UART1_TX);
- omap_cfg_reg(UART1_RTS);
- omap_cfg_reg(UART2_TX);
- omap_cfg_reg(UART2_RTS);
- omap_cfg_reg(UART3_TX);
- omap_cfg_reg(UART3_RX);
-
- /* Watchdog */
- gpio_request(0, "Watchdog");
- /* smc91x reset */
- gpio_request(7, "SMC91x reset");
- gpio_direction_output(7, 1);
- udelay(2); /* wait at least 100ns */
- gpio_set_value(7, 0);
- mdelay(50); /* 50ms until PHY ready */
- /* smc91x interrupt pin */
- gpio_request(8, "SMC91x irq");
- /* 16C554 reset*/
- gpio_request(6, "16C554 reset");
- gpio_direction_output(6, 0);
- /* 16C554 interrupt pins */
- gpio_request(12, "16C554 irq");
- gpio_request(13, "16C554 irq");
- gpio_request(14, "16C554 irq");
- gpio_request(15, "16C554 irq");
- irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
- irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
- irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
- irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
-
- voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
- voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
- platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
- omap_serial_init();
- omap1_usb_init(&voiceblue_usb_config);
- omap_register_i2c_bus(1, 100, NULL, 0);
-
- /* There is a good chance board is going up, so enable power LED
- * (it is connected through invertor) */
- omap_writeb(0x00, OMAP_LPG1_LCR);
- omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
-}
-
-MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
- /* Maintainer: Ladislav Michl <michl@xxxxx> */
- .atag_offset = 0x100,
- .map_io = omap15xx_map_io,
- .init_early = omap1_init_early,
- .init_irq = omap1_init_irq,
- .handle_irq = omap1_handle_irq,
- .init_machine = voiceblue_init,
- .init_late = omap1_init_late,
- .init_time = omap1_timer_init,
- .restart = voiceblue_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/include/mach/board-voiceblue.h b/arch/arm/mach-omap1/include/mach/board-voiceblue.h
deleted file mode 100644
index 27916b2..0000000
--- a/arch/arm/mach-omap1/include/mach/board-voiceblue.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@xxxxx>
- *
- * Hardware definitions for OMAP5910 based VoiceBlue board.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VOICEBLUE_H
-#define __ASM_ARCH_VOICEBLUE_H
-
-extern void voiceblue_wdt_enable(void);
-extern void voiceblue_wdt_disable(void);
-extern void voiceblue_wdt_ping(void);
-
-#endif /* __ASM_ARCH_VOICEBLUE_H */
-
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
