On Tue, 11 Aug 2015 13:16:13 +0100
Grygorii Strashko <grygorii.strashko@xxxxxx> wrote:
> On 08/11/2015 02:24 PM, Marc Zyngier wrote:
> > On Tue, 11 Aug 2015 10:25:47 +0100
> > Grygorii Strashko <grygorii.strashko@xxxxxx> wrote:
> >
> > Hi Grygorii,
> >
> >> It's observed that ARM GIC IRQ triggering type is not configured
> >> properly when IRQ is routed through IRQ domains hierarchy and
> >> system started using DT. As result, system will start using default
> >> ARM GIC configuration, ignore DT IRQ type configuration,
> >> and value of desc->irq_data.state_use_accessors = 0.
> >>
> >> In case of TI OMAP the following IRQ hierarchy is defined:
> >> ARM GIC <- OMAP wakeupgen <- TI CBAR
> >>
> >> Failed call chain:
> >> irq_create_of_mapping
> >> irq_set_irq_type
> >> __irq_set_trigger
> >> if (!chip || !chip->irq_set_type) {
> >> return 0; <- return here
> >> }
> >> CBAR has no .irq_set_type() defined and, so, IRQ triggering
> >> configuration will not be propagated to parent IRQ domain.
> >>
> >> Hence, fix it by introducing irq_chip_set_type_parent(), in the
> >> same manner as irq_chip_set_wake_parent(), and use it for IRQ
> >> triggering type propagation to the parent IRQ domain in
> >> irq-crossbar and omap-wakeupgen.
> >>
> >> / # cat /proc/interrupts -- before
> >> 230: 0 0 CBAR 30 Edge -00000000 48051000.gpio
> >> 263: 0 0 CBAR 116 Edge -00000000 48053000.gpio
> >> 296: 246 0 CBAR 67 Edge -00000000 OMAP UART0
> >> 311: 341 0 CBAR 51 Edge -00000000 48070000.i2c
> >> 312: 3 0 CBAR 52 Edge -00000000 48072000.i2c
> >> 313: 0 0 CBAR 56 Edge -00000000 48060000.i2c
> >> 314: 255 0 CBAR 78 Edge -00000000 mmc0
> >> 315: 40 0 CBAR 81 Edge -00000000 mmc1
> >> 316: 13 0 CBAR 91 Edge -00000000 mmc2
> >> 320: 0 0 CBAR 49 Edge -00000000 4a140000.sata
> >> 324: 0 0 CBAR 1 Edge -00000000 48078000.elm
> >> 325: 0 0 CBAR 15 Edge -00000000 gpmc
> >> 333: 0 0 CBAR 335 Edge -00000000 48484000.ethernet
> >> 334: 0 0 CBAR 336 Edge -00000000 48484000.ethernet
> >> 415: 0 0 pcf857x 2 Edge -00000000 btnUser1
> >> 416: 0 0 pcf857x 3 Edge -00000000 btnUser2
> >> 445: 0 0 pinctrl 992 Edge -00010000 4806a000.seria
> >>
> >> / # cat /proc/interrupts -- after
> >> 230: 0 0 CBAR 30 Level -00002004 48051000.gpio
> >> 263: 0 0 CBAR 116 Level -00002004 48053000.gpio
> >> 296: 567 0 CBAR 67 Level -00002004 OMAP UART0
> >> 311: 363 0 CBAR 51 Level -00002004 48070000.i2c
> >> 312: 3 0 CBAR 52 Level -00002004 48072000.i2c
> >> 313: 0 0 CBAR 56 Level -00002004 48060000.i2c
> >> 314: 197 0 CBAR 78 Level -00002004 mmc0
> >> 315: 40 0 CBAR 81 Level -00002004 mmc1
> >> 316: 13 0 CBAR 91 Level -00002004 mmc2
> >> 320: 0 0 CBAR 49 Level -00002004 4a140000.sata
> >> 324: 0 0 CBAR 1 Level -00002004 48078000.elm
> >> 325: 0 0 CBAR 15 Level -00002004 gpmc
> >> 333: 0 0 CBAR 335 Level -00002004 48484000.ethernet
> >> 334: 0 0 CBAR 336 Level -00002004 48484000.ethernet
> >> 415: 0 0 pcf857x 2 Edge -00000000 btnUser1
> >> 416: 4 2 pcf857x 3 Edge -00000000 btnUser2
> >> 445: 0 0 pinctrl 992 Edge -00010000 4806a000.serial
> >>
> >> Fixes: 783d31863fb8 ('irqchip: crossbar: Convert dra7 crossbar to stacked domains')
> >> Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
> >> ---
> >> Hi All,
> >>
> >> I can split patch if required and overall solution acceptable.
> >
> > This looks good to me. Please repost it after splitting it in two
> > patches.
>
> just to clarify - Do you want to see two or three patches?
>
> 2) or 3) arch/arm/mach-omap2/omap-wakeupgen.c | 1 +
> 2) drivers/irqchip/irq-crossbar.c | 1 +
> 1) include/linux/irq.h | 1 +
> 1) kernel/irq/chip.c | 16 ++++++++++++++++
Ah, I forgot wakeupgen lived in the omap-specific directory.
Please cut it in 3 then (generic implementation, crossbar and
wakeupgen).
Thanks,
M.
--
Jazz is not dead. It just smells funny.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
