On Tue, 11 Aug 2015 10:25:47 +0100
Grygorii Strashko <grygorii.strashko@xxxxxx> wrote:
Hi Grygorii,
> It's observed that ARM GIC IRQ triggering type is not configured
> properly when IRQ is routed through IRQ domains hierarchy and
> system started using DT. As result, system will start using default
> ARM GIC configuration, ignore DT IRQ type configuration,
> and value of desc->irq_data.state_use_accessors = 0.
>
> In case of TI OMAP the following IRQ hierarchy is defined:
> ARM GIC <- OMAP wakeupgen <- TI CBAR
>
> Failed call chain:
> irq_create_of_mapping
> irq_set_irq_type
> __irq_set_trigger
> if (!chip || !chip->irq_set_type) {
> return 0; <- return here
> }
> CBAR has no .irq_set_type() defined and, so, IRQ triggering
> configuration will not be propagated to parent IRQ domain.
>
> Hence, fix it by introducing irq_chip_set_type_parent(), in the
> same manner as irq_chip_set_wake_parent(), and use it for IRQ
> triggering type propagation to the parent IRQ domain in
> irq-crossbar and omap-wakeupgen.
>
> / # cat /proc/interrupts -- before
> 230: 0 0 CBAR 30 Edge -00000000 48051000.gpio
> 263: 0 0 CBAR 116 Edge -00000000 48053000.gpio
> 296: 246 0 CBAR 67 Edge -00000000 OMAP UART0
> 311: 341 0 CBAR 51 Edge -00000000 48070000.i2c
> 312: 3 0 CBAR 52 Edge -00000000 48072000.i2c
> 313: 0 0 CBAR 56 Edge -00000000 48060000.i2c
> 314: 255 0 CBAR 78 Edge -00000000 mmc0
> 315: 40 0 CBAR 81 Edge -00000000 mmc1
> 316: 13 0 CBAR 91 Edge -00000000 mmc2
> 320: 0 0 CBAR 49 Edge -00000000 4a140000.sata
> 324: 0 0 CBAR 1 Edge -00000000 48078000.elm
> 325: 0 0 CBAR 15 Edge -00000000 gpmc
> 333: 0 0 CBAR 335 Edge -00000000 48484000.ethernet
> 334: 0 0 CBAR 336 Edge -00000000 48484000.ethernet
> 415: 0 0 pcf857x 2 Edge -00000000 btnUser1
> 416: 0 0 pcf857x 3 Edge -00000000 btnUser2
> 445: 0 0 pinctrl 992 Edge -00010000 4806a000.seria
>
> / # cat /proc/interrupts -- after
> 230: 0 0 CBAR 30 Level -00002004 48051000.gpio
> 263: 0 0 CBAR 116 Level -00002004 48053000.gpio
> 296: 567 0 CBAR 67 Level -00002004 OMAP UART0
> 311: 363 0 CBAR 51 Level -00002004 48070000.i2c
> 312: 3 0 CBAR 52 Level -00002004 48072000.i2c
> 313: 0 0 CBAR 56 Level -00002004 48060000.i2c
> 314: 197 0 CBAR 78 Level -00002004 mmc0
> 315: 40 0 CBAR 81 Level -00002004 mmc1
> 316: 13 0 CBAR 91 Level -00002004 mmc2
> 320: 0 0 CBAR 49 Level -00002004 4a140000.sata
> 324: 0 0 CBAR 1 Level -00002004 48078000.elm
> 325: 0 0 CBAR 15 Level -00002004 gpmc
> 333: 0 0 CBAR 335 Level -00002004 48484000.ethernet
> 334: 0 0 CBAR 336 Level -00002004 48484000.ethernet
> 415: 0 0 pcf857x 2 Edge -00000000 btnUser1
> 416: 4 2 pcf857x 3 Edge -00000000 btnUser2
> 445: 0 0 pinctrl 992 Edge -00010000 4806a000.serial
>
> Fixes: 783d31863fb8 ('irqchip: crossbar: Convert dra7 crossbar to stacked domains')
> Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
> ---
> Hi All,
>
> I can split patch if required and overall solution acceptable.
This looks good to me. Please repost it after splitting it in two
patches.
Thanks,
M.
--
Jazz is not dead. It just smells funny.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
