Hi, am57xx-beagle-x15 uses a variant of the Palmas chip and has USB1 port's VBUS and ID connected to it. However this Palmas variant does not support OTG ID detection but does have GPIO support on the pin where ID line is connected. This series adds GPIO based ID detection to the Palmas extcon driver and updates am57xx-beagle-x15.dts to use Palmas for VBUS and ID detection for USB1 port. v2: - Add debounce-delay-ms property. Re-use enable-id-detection property to enable GPIO based ID detection based on availability of id-gpio. cheers, -roger Roger Quadros (2): extcon: palmas: Support GPIO based USB ID detection ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2 .../devicetree/bindings/extcon/extcon-palmas.txt | 5 +- arch/arm/boot/dts/am57xx-beagle-x15.dts | 29 +++--- drivers/extcon/extcon-palmas.c | 114 ++++++++++++++++++--- include/linux/mfd/palmas.h | 6 ++ 4 files changed, 125 insertions(+), 29 deletions(-) -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
