Re: [PATCH 2/5] PM / Wakeirq: Add automated device wake IRQ handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday, May 18, 2015 04:44:01 PM Tony Lindgren wrote:
> * Tony Lindgren <tony@xxxxxxxxxxx> [150518 15:06]:
> > +/**
> > + * dev_pm_set_wake_irq - Attach device IO interrupt as wake IRQ
> > + * @dev: Device entry
> > + * @irq: Device IO interrupt
> > + *
> > + * Attach a device IO interrupt as a wake IRQ. The wake IRQ gets
> > + * automatically configured for wake-up from suspend  based
> > +void dev_pm_clear_wake_irq(struct device *dev)
> > +{
> > +	struct wake_irq *wirq = dev->power.wakeirq;
> > +	unsigned long flags;
> > +
> > +	if (!wirq)
> > +		return;
> > +
> > +	device_wakeup_detach_irq(dev);
> > +
> > +	spin_lock_irqsave(&dev->power.lock, flags);
> > +	if (wirq->manage_irq) {
> > +		free_irq(wirq->irq, wirq);
> > +		wirq->manage_irq = false;
> > +	}
> > +	dev->power.wakeirq = NULL;
> > +	spin_unlock_irqrestore(&dev->power.lock, flags);
> > +
> > +	wirq->irq = -EINVAL;
> > +	kfree(wirq);
> > +}
> 
> I just noticed most of the dev_pm_clear_wake_irq is no longer needed.
> We're now freeing it anyways. so it can be just:
> 
> void dev_pm_clear_wake_irq(struct device *dev)
> {
> 	struct wake_irq *wirq = dev->power.wakeirq;
> 	unsigned long flags;
> 
> 	if (!wirq)
> 		return;
> 
> 	spin_lock_irqsave(&dev->power.lock, flags);
> 	dev->power.wakeirq = NULL;
> 	spin_unlock_irqrestore(&dev->power.lock, flags);
> 
> 	device_wakeup_detach_irq(dev);
> 	if (wirq->manage_irq)
> 		free_irq(wirq->irq, wirq);
> 	kfree(wirq);
> }
> 
> 
> Regards,
> 
> Tony
> 
> 8< ---------------------
> From: Tony Lindgren <tony@xxxxxxxxxxx>
> Date: Mon, 18 May 2015 15:40:29 -0700
> Subject: [PATCH] PM / Wakeirq: Add automated device wake IRQ handling
> 
> Turns out we can automate the handling for the device_may_wakeup()
> quite a bit by using the kernel wakeup source list.
> 
> And as some hardware has separate dedicated wake-up interrupt
> in addition to the IO interrupt, we can automate the handling by
> adding a generic threaded interrupt handler that just calls the
> device PM runtime to wake up the device.
> 
> This allows dropping code from device drivers as we currently
> are doing it in multiple ways, and often wrong.
> 
> For most drivers, we should be able to drop the following
> boilerplate code from runtime_suspend and runtime_resume
> functions:
> 
> 	...
> 	device_init_wakeup(dev, true);
> 	...
> 	if (device_may_wakeup(dev)
> 		enable_irq_wake(irq);
> 	...
> 	if (device_may_wakeup(dev)
> 		enable_irq_wake(irq);

Closing parens are missin in the above two if () statements.

Also, should the second one be disable_irq_wake(irq)?

> 	...
> 	device_init_wakeup(dev, false);
> 	...
> 
> We can replace it with just the following init and exit
> time code:
> 
> 	...
> 	device_init_wakeup(dev, true);
> 	dev_pm_set_wake_irq(dev, irq);
> 	...
> 	dev_pm_clear_wake_irq(dev);
> 	device_init_wakeup(dev, false);
> 	...
> 
> And for hardware with dedicated wake-up interrupts:
> 
> 	...
> 	device_init_wakeup(dev, true);
> 	dev_pm_set_dedicated_wake_irq(dev, irq);
> 	...
> 	dev_pm_clear_wake_irq(dev);
> 	device_init_wakeup(dev, false);
> 	...
> 
> For now, let's only enable it for select PM_WAKEIRQ.

Why?  What would be wrong with doing that unconditionally?


> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>

Looks good overall, a couple of nits below.

[cut]

> +/**
> + * handle_threaded_wake_irq - Handler for dedicated wake-up interrupts
> + * @irq: Device dedicated wake-up interrupt
> + * @_wirq: Wake IRQ data
> + *
> + * Some devices have a separate wake-up interrupt in addition to the
> + * device IO interrupt. The wake-up interrupts signal that the device
> + * should be woken up from a idle state. This handler uses device
> + * specific pm_runtime functions to wake the device and then it's
> + * up to the device to do whatever it needs to. Note as the device
> + * may need to restore context and start up regulators, we use a
> + * threaded IRQ.
> + *
> + * Also note that we are not resending the lost device interrupts.
> + * We assume that the wake-up interrupt just needs to wake-up the
> + * device, and the device pm_runtime_resume() can deal with the
> + * situation.
> + */
> +static irqreturn_t handle_threaded_wake_irq(int irq, void *_wirq)
> +{
> +	struct wake_irq *wirq = _wirq;
> +
> +	/* We don't want RPM_ASYNC or RPM_NOWAIT here */
> +	return pm_runtime_resume(wirq->dev) ? IRQ_NONE : IRQ_HANDLED;

There are various reasons why pm_runtime_resume() may return error codes and
some of them don't mean that the interrupt was not legitimate.

Moreover, it returns 1 if the device is already active, in which case the above
check won't do any good to us.

Why not to return IRQ_HANDLED unconditionally from here?


[cut]

> diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
> index 7e01f78..d3735bd 100644
> --- a/kernel/power/Kconfig
> +++ b/kernel/power/Kconfig
> @@ -267,6 +267,10 @@ config PM_CLK
>  	def_bool y
>  	depends on PM && HAVE_CLK
>  
> +config PM_WAKEIRQ
> +	bool
> +	depends on PM_SLEEP
> +

If you really really want this (I'm still not sure why exactly, though), it
should depend on PM_SLEEP || PM_RUNTIME, because the latter uses it too.

>  config PM_GENERIC_DOMAINS
>  	bool
>  	depends on PM

Thanks,
Rafael

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux