Re: [PATCH v6 6/6] wlcore: remove wl12xx_platform_data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Sebastian Reichel <sre@xxxxxxxx> [150316 11:26]:
> Hi,
> 
> On Mon, Mar 16, 2015 at 08:29:39AM -0700, Tony Lindgren wrote:
> > * Arnd Bergmann <arnd@xxxxxxxx> [150315 05:10]:
> > > On Sunday 15 March 2015 10:50:42 Eliad Peller wrote:
> > > > yeah, i missed it :/
> > > > 
> > > > looks like there's no platform that defines platform data for it.
> > > > i'll replace the dev_get_platdata() with a function that only parses
> > > > the clock-frequency properties (the irq is taken in this case from the
> > > > spi_device).
> > > > (or maybe i should just drop it, as no one actually uses it?)
> > > 
> > > I don't think we should drop the driver, but dropping the platform_data
> > > support sounds reasonable. New users of this driver should all be using
> > > DT, and if there is a good reason to use platform_data, it's easily
> > > put back.
> > 
> > Well we have n8x0 and n900 using the spi driver. For those, n8x0 boot
> > all in dts mode, but n900 still also boots in legacy mode. It seems the
> > board-rx51-peripherals.c only passes the power_gpio though, so that
> > should be easy to keep around.
> > 
> > We should keep things still working for n900 in legacy mode until the
> > pending regressions with device tree based booting have been cleared
> > for at least one merge cycle. I believe the last pending issues is the
> > support for ATAG_REVISION in device tree mode as posted by Pali.
> 
> mh by migrating to newer gpiod interface platform data is no longer
> needed (instead the boardfile would need a gpiod_lookup_table). That
> way all of the dirty code is in the board file and will be removed
> once the time comes. See for example rx51_fmtx_gpios_table.
> 
> Note: This is independent of wl12xx changes, since N900 uses wl1251.

Oh sorry yes sounds like that's different platform data then. In that
case I see no reasons to drop the platform data for wl12xx.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux