On Tue, Mar 10, 2015 at 6:18 PM, Tony Lindgren <tony@xxxxxxxxxxx> wrote: > * Eliad Peller <eliad@xxxxxxxxxx> [150310 09:11]: >> On Tue, Mar 10, 2015 at 5:52 PM, Arnd Bergmann <arnd@xxxxxxxx> wrote: >> > On Tuesday 10 March 2015 16:31:33 Eliad Peller wrote: >> >> On Tue, Mar 10, 2015 at 4:11 PM, Arnd Bergmann <arnd@xxxxxxxx> wrote: >> >> > On Tuesday 10 March 2015 13:00:19 Eliad Peller wrote: >> >> >> On Tue, Mar 10, 2015 at 12:49 AM, Tony Lindgren <tony@xxxxxxxxxxx> wrote: >> >> >> >> > I was expecting you to remove all calls to legacy_init_wl12xx from this file, >> >> >> >> > including the ones for wl12xx aside from the wl18xx ones you removed, but >> >> >> >> > if that's enough to clean out the platform_data handling from the wlcore >> >> >> >> > driver, it's good enough as a start. >> >> >> >> not sure i'm following - can you elaborate? >> >> >> >> >> >> >> >> i'll summarize the way i see it. please correct me if i'm wrong. >> >> >> >> >> >> >> >> both wl18xx and wl12xx use the platform data to get the irq number. >> >> >> >> wl12xx (only) also needs some additional clock definitions to be >> >> >> >> passed. there's currently some issue with specifying some the of clock >> >> >> >> sources, so i preferred starting only with (the simpler) wl18xx >> >> >> >> bindings. >> >> >> >> >> >> >> >> for platforms with wl18xx, we can remove the pdata-quirk, as all the >> >> >> >> data (i.e. irq) can be passed by the new DT bindings. >> >> >> >> however, for platforms with wl12xx, we still need to pass the clock >> >> >> >> definitions (along with the irq), so we have to keep >> >> >> >> legacy_init_wl12xx for the time being (and that's also why we have to >> >> >> >> currently keep the platform_data handling in the wlcore driver) >> >> >> >> >> >> >> >> do you have something else in mind? >> >> >> > >> >> >> > I think what Arnd is saying is we've now removed all the wl12xx using >> >> >> > legacy platforms, so all of them can boot with just data from dts. >> >> > >> >> > Right, that was my idea. >> >> > >> >> >> I don't think that's the case (unless i'm missing something). >> >> >> e.g. there's still pdata-quirk for "compulab,omap3-sbc-t3730" which >> >> >> initializes wl12xx device. >> >> > >> >> > This one is just like the igep0030, as Tony was saying: the board >> >> > boots from device tree already, so now that we have a binding for >> >> > it, we can remove the wl12xx_set_platform_data() for it. >> >> > >> >> i think the wl12xx_set_platform_data() name created some confusion - >> >> it is used to pass platform data for both wl12xx and wl18xx devices. >> >> (this confusion is all around the wlcore driver as well, due to the >> >> code evolution) >> >> >> >> the binding i added is for wl18xx only (there is no wl12xx binding yet). >> >> the remaining boards, AFAICT, have wl12xx (rather than wl18xx) cards. >> >> so i don't see how we can remove these wl12xx_set_platform_data() >> >> calls before we have wl12xx bindings in-place as well. >> > >> > What is missing for that binding then? I keep getting confused here, >> > but I thought that they share the implementation that looks at the >> > platform data. >> > >> they both get the same wl12xx_platform_data struct, but only wl12xx >> cares about the clocks-related fields. >> the bindings i added parses only the irq. >> >> (Luca tried previously to upstream wl12xx DT support along with the >> required clock DT changes, but got some rejections, mainly wrt. clock >> stuff. >> e.g. http://thread.gmane.org/gmane.linux.kernel/1520752 >> that's why i preferred starting with "easier" wl18xx bindings only) > > I believe we did not have clock bindings back then, now it's simple > to get the clock. If it's some internal clock to the wl12xx, then > that's a different story, it should be just hidden behind a compatible > flag then. > i'm really not familiar with the common clock framework, but there still doesn't seem to be a way to determine whether a clock is XTAL or not (which is what Luca's patch was about). should we use compatible flag in such case? i'm not sure it sounds right. anyway, i'd really prefer, if possible, starting with the wl18xx bindings, and defer the wl12xx complications to later on. (i also need to find some wl12xx card in order to actually test the patches once i'll have them...) we do have to make sure these wl18xx bindings are future-compatible with the wl12xx ones, but i think the current bindings are pretty much standard (and are actually a subset of the bindings needed by wl12xx), so it should be fine. Eliad. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
