On Tue, Mar 10, 2015 at 4:11 PM, Arnd Bergmann <arnd@xxxxxxxx> wrote: > On Tuesday 10 March 2015 13:00:19 Eliad Peller wrote: >> On Tue, Mar 10, 2015 at 12:49 AM, Tony Lindgren <tony@xxxxxxxxxxx> wrote: >> >> > I was expecting you to remove all calls to legacy_init_wl12xx from this file, >> >> > including the ones for wl12xx aside from the wl18xx ones you removed, but >> >> > if that's enough to clean out the platform_data handling from the wlcore >> >> > driver, it's good enough as a start. >> >> not sure i'm following - can you elaborate? >> >> >> >> i'll summarize the way i see it. please correct me if i'm wrong. >> >> >> >> both wl18xx and wl12xx use the platform data to get the irq number. >> >> wl12xx (only) also needs some additional clock definitions to be >> >> passed. there's currently some issue with specifying some the of clock >> >> sources, so i preferred starting only with (the simpler) wl18xx >> >> bindings. >> >> >> >> for platforms with wl18xx, we can remove the pdata-quirk, as all the >> >> data (i.e. irq) can be passed by the new DT bindings. >> >> however, for platforms with wl12xx, we still need to pass the clock >> >> definitions (along with the irq), so we have to keep >> >> legacy_init_wl12xx for the time being (and that's also why we have to >> >> currently keep the platform_data handling in the wlcore driver) >> >> >> >> do you have something else in mind? >> > >> > I think what Arnd is saying is we've now removed all the wl12xx using >> > legacy platforms, so all of them can boot with just data from dts. > > Right, that was my idea. > >> I don't think that's the case (unless i'm missing something). >> e.g. there's still pdata-quirk for "compulab,omap3-sbc-t3730" which >> initializes wl12xx device. > > This one is just like the igep0030, as Tony was saying: the board > boots from device tree already, so now that we have a binding for > it, we can remove the wl12xx_set_platform_data() for it. > i think the wl12xx_set_platform_data() name created some confusion - it is used to pass platform data for both wl12xx and wl18xx devices. (this confusion is all around the wlcore driver as well, due to the code evolution) the binding i added is for wl18xx only (there is no wl12xx binding yet). the remaining boards, AFAICT, have wl12xx (rather than wl18xx) cards. so i don't see how we can remove these wl12xx_set_platform_data() calls before we have wl12xx bindings in-place as well. > Unfortunately, there is still one machine that uses a board file > in combination with this wl12xx: da850-evm calls > wl12xx_set_platform_data() from a legacy board file without DT. > ditto. Eliad. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
