* George Cherian <george.cherian@xxxxxx> [150206 05:05]:
> Hi Tony,
>
> You also need to add similar things in dsps_musb_reset();
>
> Otherwise you might not recover from a BABBLE condition.
Thank I totally missed that, updated patch below.
Do you have some testcase that easily triggers BABBLE
on MUSB?
Regards,
Tony
8< ----------------------
From: Tony Lindgren <tony@xxxxxxxxxxx>
Date: Wed, 4 Feb 2015 06:28:49 -0800
Subject: [PATCH] usb: musb: Fix getting a generic phy for musb_dsps
We still have a combination of legacy phys and generic phys in
use so we need to support both types of phy for musb_dsps.c.
Cc: Brian Hutchinson <b.hutchman@xxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -457,12 +457,27 @@ static int dsps_musb_init(struct musb *musb)
if (IS_ERR(musb->xceiv))
return PTR_ERR(musb->xceiv);
+ musb->phy = devm_phy_get(dev->parent, "usb2-phy");
+
/* Returns zero if e.g. not clocked */
rev = dsps_readl(reg_base, wrp->revision);
if (!rev)
return -ENODEV;
usb_phy_init(musb->xceiv);
+ if (IS_ERR(musb->phy)) {
+ musb->phy = NULL;
+ } else {
+ ret = phy_init(musb->phy);
+ if (ret < 0)
+ return ret;
+ ret = phy_power_on(musb->phy);
+ if (ret) {
+ phy_exit(musb->phy);
+ return ret;
+ }
+ }
+
setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
/* Reset the musb */
@@ -502,6 +517,8 @@ static int dsps_musb_exit(struct musb *musb)
del_timer_sync(&glue->timer);
usb_phy_shutdown(musb->xceiv);
+ phy_power_off(musb->phy);
+ phy_exit(musb->phy);
debugfs_remove_recursive(glue->dbgfs_root);
return 0;
@@ -610,7 +627,7 @@ static int dsps_musb_reset(struct musb *musb)
struct device *dev = musb->controller;
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
const struct dsps_musb_wrapper *wrp = glue->wrp;
- int session_restart = 0;
+ int session_restart = 0, error;
if (glue->sw_babble_enabled)
session_restart = sw_babble_control(musb);
@@ -624,8 +641,14 @@ static int dsps_musb_reset(struct musb *musb)
dsps_writel(musb->ctrl_base, wrp->control, (1 << wrp->reset));
usleep_range(100, 200);
usb_phy_shutdown(musb->xceiv);
+ error = phy_power_off(musb->phy);
+ if (error)
+ dev_err(dev, "phy shutdown failed: %i\n", error);
usleep_range(100, 200);
usb_phy_init(musb->xceiv);
+ error = phy_power_on(musb->phy);
+ if (error)
+ dev_err(dev, "phy powerup failed: %i\n", error);
session_restart = 1;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
