Just to note that smc91x ethernet support is also in qemu n900
emulation. Later I will try if it work with upstream kernel...
On Tuesday 06 January 2015 00:02:29 Tony Lindgren wrote:
> Revert "ARM: dts: Disable smc91x on n900 until bootloader
> dependency is removed". We've now fixed the issues that
> caused problems with uninitialized hardware depending on
> the bootloader version. Mostly things got fixed with
> the following commits:
>
> 9a894953a97b ("ARM: dts: Fix bootloader version dependencies
> by muxing n900 smc91x pins") 7d2911c43815 ("net: smc91x: Fix
> gpios for device tree based booting")
>
> Note that this only affects the early development boards
> with Ethernet that we still have in a few automated boot
> test systems.
>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
>
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -702,9 +702,6 @@
>
> ethernet@gpmc {
> compatible = "smsc,lan91c94";
> -
> - status = "disabled";
> -
> interrupt-parent = <&gpio2>;
> interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
> reg = <1 0x300 0xf>; /* 16 byte IO range at offset
0x300
> */
--
Pali Rohár
pali.rohar@xxxxxxxxx
Attachment:
signature.asc
Description: This is a digitally signed message part.
