On Sat, Dec 27, 2014 at 11:35:16PM +0100, Pavel Machek wrote:
> On Sat 2014-12-27 20:58:25, Pavel Machek wrote:
> > On Fri 2014-12-26 13:34:53, Sebastian Reichel wrote:
> > > OMAP34xx and OMAP36xx processors contain a register in the syscon area,
> > > which can be used to determine the SoCs temperature. This patch provides
> > > a DT based driver for the temperature sensor based on an older driver
> > > written by Peter De Schrijver for the Nokia N900 and N9.
> > >
> > > Signed-off-by: Sebastian Reichel <sre@xxxxxxxxxx>
> > > ---
> > > drivers/hwmon/Kconfig | 8 ++
> > > drivers/hwmon/Makefile | 1 +
> > > drivers/hwmon/omap3-temp.c | 307 +++++++++++++++++++++++++++++++++++++++++++++
> > > 3 files changed, 316 insertions(+)
> > > create mode 100644 drivers/hwmon/omap3-temp.c
> >
> > When it hangs, it loops here:
> >
> > do {
> > regmap_read(data->syscon, SYSCON_TEMP_REG,&temp_sensor_reg);
> > if ((temp_sensor_reg & eocz_mask) == level)
> > return true;
> > printk("=");
> > }
> > while (ktime_us_delta(expire, ktime_get()) > 0);
>
> And this fixes the hang, and makes level handling more readable.
>
> Fix the timeout code, now it actually works. Driver still fails after
> a while.
>
> Signed-off-by: Pavel Machek <pavel@xxxxxx>
>
> diff --git a/drivers/hwmon/omap3-temp.c b/drivers/hwmon/omap3-temp.c
> index 8a69604..1b8c768 100644
> --- a/drivers/hwmon/omap3-temp.c
> +++ b/drivers/hwmon/omap3-temp.c
> @@ -130,9 +130,7 @@ static inline bool wait_for_eocz(struct omap3_temp_data *data,
> ktime_t timeout, expire;
> u32 temp_sensor_reg, eocz_mask;
>
> eocz_mask = BIT(data->hwdata->eocz_bit);
> - level &= 1;
> - level *= eocz_mask;
>
> expire = ktime_add_ns(ktime_get(), max_delay);
> timeout = ktime_set(0, min_delay);
> @@ -140,9 +141,9 @@ static inline bool wait_for_eocz(struct omap3_temp_data *data,
> schedule_hrtimeout(&timeout, HRTIMER_MODE_REL);
> do {
> regmap_read(data->syscon, SYSCON_TEMP_REG, &temp_sensor_reg);
> - if ((temp_sensor_reg & eocz_mask) == level)
> + if (!!(temp_sensor_reg & eocz_mask) == level)
> return true;
> - } while (ktime_us_delta(expire, ktime_get()) > 0);
> + } while (ktime_after(expire, ktime_get()));
>
Does this have to be a hard loop, without sleep ? I am a bit concerned that it
may loop for more than a ms.
Other than that, I assume we'll see an updated version with the coding style
issues and hang-up problems fixed.
Thanks,
Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
