Re: [PATCH] media: i2c/adp1653: devicetree support for adp1653

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Em Wed, 3 Dec 2014 22:46:41 +0100
Pavel Machek <pavel@xxxxxx> escreveu:

> 
> We are moving to device tree support on OMAP3, but that currently
> breaks ADP1653 driver. This adds device tree support, plus required
> documentation.
> 
> Signed-off-by: Pavel Machek <pavel@xxxxxx>

Please be sure to check your patch with checkpatch. There are several
issues on it:

WARNING: DT compatible string "adi,adp1653" appears un-documented -- check ./Documentation/devicetree/bindings/
#78: FILE: arch/arm/boot/dts/omap3-n900.dts:572:
+		compatible = "adi,adp1653";

ERROR: trailing whitespace
#136: FILE: drivers/media/i2c/adp1653.c:332:
+^I^I^I$

ERROR: trailing whitespace
#159: FILE: drivers/media/i2c/adp1653.c:436:
+static int adp1653_of_init(struct i2c_client *client, struct adp1653_flash *flash, $

WARNING: line over 80 characters
#159: FILE: drivers/media/i2c/adp1653.c:436:
+static int adp1653_of_init(struct i2c_client *client, struct adp1653_flash *flash, 

ERROR: trailing statements should be on next line
#177: FILE: drivers/media/i2c/adp1653.c:454:
+	if (!child) return -EINVAL;

WARNING: line over 80 characters
#178: FILE: drivers/media/i2c/adp1653.c:455:
+	if (of_property_read_u32(child, "flash-timeout-microsec", &val)) return -EINVAL;

ERROR: trailing statements should be on next line
#178: FILE: drivers/media/i2c/adp1653.c:455:
+	if (of_property_read_u32(child, "flash-timeout-microsec", &val)) return -EINVAL;

WARNING: line over 80 characters
#180: FILE: drivers/media/i2c/adp1653.c:457:
+	if (of_property_read_u32(child, "flash-max-microamp", &val)) return -EINVAL;

ERROR: trailing statements should be on next line
#180: FILE: drivers/media/i2c/adp1653.c:457:
+	if (of_property_read_u32(child, "flash-max-microamp", &val)) return -EINVAL;

ERROR: trailing statements should be on next line
#182: FILE: drivers/media/i2c/adp1653.c:459:
+	if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL;

ERROR: trailing statements should be on next line
#186: FILE: drivers/media/i2c/adp1653.c:463:
+	if (!child) return -EINVAL;

ERROR: trailing statements should be on next line
#187: FILE: drivers/media/i2c/adp1653.c:464:
+	if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL;

ERROR: trailing whitespace
#197: FILE: drivers/media/i2c/adp1653.c:474:
+^I^Idev_err(&client->dev, "Error getting GPIO\n"); $

total: 9 errors, 4 warnings, 199 lines checked

NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or
      scripts/cleanfile

> 
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt
> @@ -0,0 +1,38 @@
> +* Analog Devices ADP1653 flash LED driver
> +
> +Required Properties:
> +
> +  - compatible: Must contain one of the following
> +    - "adi,adp1653"
> +
> +  - reg: I2C slave address
> +
> +  - gpios: References to the GPIO that controls the power for the chip.
> +
> +There are two led outputs available - flash and indicator. One led is
> +represented by one child node, nodes need to be named "flash" and "indicator".
> +
> +Required properties of the LED child node:
> +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt
> +
> +Required properties of the flash LED child node:
> +
> +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
> +- flash-timeout-microsec : see Documentation/devicetree/bindings/leds/common.txt
> +
> +Example:
> +
> +        adp1653: led-controller@30 {
> +                compatible = "adi,adp1653";
> +		reg = <0x30>;
> +                gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
> +
> +		flash {
> +                        flash-timeout-microsec = <500000>;
> +                        flash-max-microamp = <320000>;
> +                        max-microamp = <50000>;
> +		};
> +                indicator {
> +                        max-microamp = <17500>;
> +		};
> +        };
> diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
> index cfddc3d..11d8afd 100644
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -560,6 +567,22 @@
>  
>  		ti,usb-charger-detection = <&isp1704>;
>  	};
> +
> +	adp1653: led-controller@30 {
> +		compatible = "adi,adp1653";
> +		reg = <0x30>;
> +		gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
> +
> +		flash {
> +			flash-timeout-microsec = <500000>;
> +			flash-max-microamp = <320000>;
> +			max-microamp = <50000>;
> +		};
> +
> +		indicator {
> +			max-microamp = <17500>;
> +		};
> +	};
>  };
>  
>  &i2c3 {
> diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c
> index 873fe19..62601b2 100644
> --- a/drivers/media/i2c/adp1653.c
> +++ b/drivers/media/i2c/adp1653.c
> @@ -8,6 +8,7 @@
>   * Contributors:
>   *	Sakari Ailus <sakari.ailus@xxxxxx>
>   *	Tuukka Toivonen <tuukkat76@xxxxxxxxx>
> + *      Pavel Machek <pavel@xxxxxx>
>   *
>   * This program is free software; you can redistribute it and/or
>   * modify it under the terms of the GNU General Public License
> @@ -34,9 +35,11 @@
>  #include <linux/module.h>
>  #include <linux/i2c.h>
>  #include <linux/slab.h>
> +#include <linux/of_gpio.h>
> +#include <linux/gpio.h>
>  #include <media/adp1653.h>
>  #include <media/v4l2-device.h>
>  
>  #define TIMEOUT_MAX		820000
>  #define TIMEOUT_STEP		54600
>  #define TIMEOUT_MIN		(TIMEOUT_MAX - ADP1653_REG_CONFIG_TMR_SET_MAX \
> @@ -306,9 +318,18 @@ adp1653_init_device(struct adp1653_flash *flash)
>  static int
>  __adp1653_set_power(struct adp1653_flash *flash, int on)
>  {
> -	int ret;
> +	int ret = 0;
>  
> -	ret = flash->platform_data->power(&flash->subdev, on);
> +	if (flash->platform_data->power)
> +		ret = flash->platform_data->power(&flash->subdev, on);
> +	else {
> +		gpio_set_value(flash->platform_data->power_gpio, on);
> +		if (on) {
> +			/* Some delay is apparently required. */
> +			udelay(20);
> +		}
> +	}
> +			
>  	if (ret < 0)
>  		return ret;
>  
> @@ -316,8 +337,13 @@ __adp1653_set_power(struct adp1653_flash *flash, int on)
>  		return 0;
>  
>  	ret = adp1653_init_device(flash);
> -	if (ret < 0)
> +	if (ret >= 0)
> +		return ret;
> +
> +	if (flash->platform_data->power)
>  		flash->platform_data->power(&flash->subdev, 0);
> +	else
> +		gpio_set_value(flash->platform_data->power_gpio, 0);
>  
>  	return ret;
>  }
> @@ -407,21 +433,69 @@ static int adp1653_resume(struct device *dev)
>  
>  #endif /* CONFIG_PM */
>  
> +static int adp1653_of_init(struct i2c_client *client, struct adp1653_flash *flash, 
> +			   struct device_node *node)
> +{
> +	u32 val;
> +	struct adp1653_platform_data *pd;
> +	enum of_gpio_flags flags;
> +	int gpio;
> +	struct device_node *child;
> +
> +	if (!node)
> +		return -EINVAL;
> +
> +	pd = devm_kzalloc(&client->dev, sizeof(*pd), GFP_KERNEL);
> +	if (!pd)
> +		return -ENOMEM;
> +	flash->platform_data = pd;
> +
> +	child = of_get_child_by_name(node, "flash");
> +	if (!child) return -EINVAL;

One statement per line, please. Same for other lines below.

> +	if (of_property_read_u32(child, "flash-timeout-microsec", &val)) return -EINVAL;
> +	pd->max_flash_timeout = val;
> +	if (of_property_read_u32(child, "flash-max-microamp", &val)) return -EINVAL;
> +	pd->max_flash_intensity = val/1000;
> +	if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL;
> +	pd->max_torch_intensity = val/1000;
> +
> +	child = of_get_child_by_name(node, "indicator");
> +	if (!child) return -EINVAL;
> +	if (of_property_read_u32(child, "max-microamp", &val)) return -EINVAL;
> +	pd->max_indicator_intensity = val;
> +
> +	if (!of_find_property(node, "gpios", NULL)) {
> +		dev_err(&client->dev, "No gpio node\n");
> +		return -EINVAL;
> +	}
> +
> +	gpio = of_get_gpio_flags(node, 0, &flags);
> +	if (gpio < 0) {
> +		dev_err(&client->dev, "Error getting GPIO\n"); 
> +		return -EINVAL;
> +	}
> +
> +	pd->power_gpio = gpio;
> +	return 0;
> +}
> +
> +
>  static int adp1653_probe(struct i2c_client *client,
>  			 const struct i2c_device_id *devid)
>  {
>  	struct adp1653_flash *flash;
>  	int ret;
>  
> -	/* we couldn't work without platform data */
> -	if (client->dev.platform_data == NULL)
> -		return -ENODEV;
> -
>  	flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
>  	if (flash == NULL)
>  		return -ENOMEM;
>  
>  	flash->platform_data = client->dev.platform_data;
> +	if (!flash->platform_data) {
> +		ret = adp1653_of_init(client, flash, client->dev.of_node);
> +		if (ret)
> +			return ret;
> +	}
>  
>  	mutex_init(&flash->power_lock);
>  
> diff --git a/include/media/adp1653.h b/include/media/adp1653.h
> index 1d9b48a..b556580 100644
> --- a/include/media/adp1653.h
> +++ b/include/media/adp1653.h
> @@ -100,9 +100,11 @@ struct adp1653_platform_data {
>  	int (*power)(struct v4l2_subdev *sd, int on);
>  
>  	u32 max_flash_timeout;		/* flash light timeout in us */
> -	u32 max_flash_intensity;	/* led intensity, flash mode */
> -	u32 max_torch_intensity;	/* led intensity, torch mode */
> -	u32 max_indicator_intensity;	/* indicator led intensity */
> +	u32 max_flash_intensity;	/* led intensity, flash mode, mA */
> +	u32 max_torch_intensity;	/* led intensity, torch mode, mA */
> +	u32 max_indicator_intensity;	/* indicator led intensity, uA */
> +
> +	int power_gpio;			/* for device-tree based boot */
>  };
>  
>  #define to_adp1653_flash(sd)	container_of(sd, struct adp1653_flash, subdev)
> 


-- 

Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux