From: Benoit Parrot <bparrot@xxxxxx> Add device tree nodes and pinmux entries for Video Processing Front End (VPFE) on am43x epos evm. Signed-off-by: Benoit Parrot <bparrot@xxxxxx> Signed-off-by: Darren Etheridge <detheridge@xxxxxx> Signed-off-by: Felipe Balbi <balbi@xxxxxx> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx> --- arch/arm/boot/dts/am43x-epos-evm.dts | 53 ++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index ac3e485..6a43801 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -243,6 +243,42 @@ 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7) >; }; + + vpfe1_pins_default: vpfe1_pins_default { + pinctrl-single,pins = < + 0x1cc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0 */ + 0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0 */ + 0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0 */ + 0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0 */ + 0x1dc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0 */ + 0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0 */ + 0x1ec (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0 */ + 0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0 */ + 0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0 */ + 0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0 */ + 0x1fc (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0 */ + 0x200 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0 */ + 0x204 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0 */ + >; + }; + + vpfe1_pins_sleep: vpfe1_pins_sleep { + pinctrl-single,pins = < + 0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) + >; + }; }; matrix_keypad: matrix_keypad@0 { @@ -626,3 +662,20 @@ }; }; }; + +&vpfe1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&vpfe1_pins_default>; + pinctrl-1 = <&vpfe1_pins_sleep>; + + port { + vpfe1_ep: endpoint { + /* remote-endpoint = <&sensor>; add once we have it */ + ti,am437x-vpfe-interface = <0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; +}; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html