HI,
On Wed, Oct 15, 2014 at 03:24:20PM +0300, Tomi Valkeinen wrote:
> On 14/10/14 21:28, Felipe Balbi wrote:
> > Caused by a copy & paste error. Note that even with
> > this bug AM437x SK display still works because GPIO
> > mux mode is always enabled. It's still wrong to mux
> > somebody else's pin.
> >
> > Luckily ball D25 (offset 0x238 - gpio5_8) on AM437x
> > isn't used for anything.
> >
> > Signed-off-by: Felipe Balbi <balbi@xxxxxx>
> > ---
> > arch/arm/boot/dts/am437x-sk-evm.dts | 3 +--
> > 1 file changed, 1 insertion(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
> > index 859ff3d..681be00 100644
> > --- a/arch/arm/boot/dts/am437x-sk-evm.dts
> > +++ b/arch/arm/boot/dts/am437x-sk-evm.dts
> > @@ -320,8 +320,7 @@
> >
> > lcd_pins: lcd_pins {
> > pinctrl-single,pins = <
> > - /* GPIO 5_8 to select LCD / HDMI */
> > - 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
> > + 0x1c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
> > >;
> > };
> > };
>
> I didn't verify the offset, but based on the comments this looks fine to me.
>
> Acked-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Tony, are you taking this patch ? Looks like it has been forgotten and
now it needs to be backported to v3.17 and v3.18 (assuming it's too late
for v3.18).
--
balbi
Attachment:
signature.asc
Description: Digital signature
