BUS1 pinctrl provides gpios for usb and power regulator
available on exynos7-espresso board. So add relevant device
node for pinctrl-bus1.
Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx>
Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
---
arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi | 26 +++++++++++++++++++++++
arch/arm64/boot/dts/exynos/exynos7.dtsi | 7 ++++++
2 files changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
index 2eef4a2..9648e03 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
@@ -335,6 +335,32 @@
};
};
+&pinctrl_bus1 {
+ gpf0: gpf0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf4: gpf4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gph1: gph1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
&pinctrl_nfc {
gpj0: gpj0 {
gpio-controller;
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index d7a37c3..90048b2 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -26,6 +26,7 @@
pinctrl5 = &pinctrl_ese;
pinctrl6 = &pinctrl_fsys0;
pinctrl7 = &pinctrl_fsys1;
+ pinctrl8 = &pinctrl_bus1;
};
cpus {
@@ -242,6 +243,12 @@
interrupts = <0 383 0>;
};
+ pinctrl_bus1: pinctrl@14870000 {
+ compatible = "samsung,exynos7-pinctrl";
+ reg = <0x14870000 0x1000>;
+ interrupts = <0 384 0>;
+ };
+
pinctrl_nfc: pinctrl@14cd0000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x14cd0000 0x1000>;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
