USB and Power regulator on Exynos7 require gpios available
in BUS1 pin controller block.
So adding the BUS1 pinctrl support.
Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx>
Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/pinctrl/samsung/pinctrl-exynos.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index d5d4cfc..caca5b5 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -1300,6 +1300,13 @@ static const struct samsung_pin_bank_data exynos7_pin_banks7[] __initconst = {
EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpr3", 0x0c),
};
+/* pin banks of exynos7 pin-controller - BUS1 */
+static const struct samsung_pin_bank_data exynos7_pin_banks8[] __initconst = {
+ EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpf0", 0x00),
+ EXYNOS_PIN_BANK_EINTG(8, 0x0a0, "gpf4", 0x10),
+ EXYNOS_PIN_BANK_EINTG(6, 0x120, "gph1", 0x20),
+};
+
const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = {
{
/* pin-controller instance 0 Alive data */
@@ -1342,5 +1349,10 @@ const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = {
.pin_banks = exynos7_pin_banks7,
.nr_banks = ARRAY_SIZE(exynos7_pin_banks7),
.eint_gpio_init = exynos_eint_gpio_init,
+ }, {
+ /* pin-controller instance 8 BUS1 data */
+ .pin_banks = exynos7_pin_banks8,
+ .nr_banks = ARRAY_SIZE(exynos7_pin_banks8),
+ .eint_gpio_init = exynos_eint_gpio_init,
},
};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
