Whenever Suspend PHY bit is set on AM437x devices, USB will not work due to Set EP Configuration command always failing. This was only found after a recent commit 2164a47 (usb: dwc3: set SUSPHY bit for all cores, which will be merged for v3.19) added a missing *required* step to dwc3 initialization. Synopsys Databook requires that we enable Suspend PHY bit after initialization but that, unfortunately, breaks AM437x. Signed-off-by: Felipe Balbi <balbi@xxxxxx> --- arch/arm/boot/dts/am4372.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 46660ff..e19068d 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -817,6 +817,8 @@ maximum-speed = "high-speed"; dr_mode = "otg"; status = "disabled"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; }; }; @@ -839,6 +841,8 @@ maximum-speed = "high-speed"; dr_mode = "otg"; status = "disabled"; + snps,dis_u3_susphy_quirk; + snps,dis_u2_susphy_quirk; }; }; -- 2.1.0.GIT -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
