-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 11/06/2014 11:32 AM, Felipe Balbi wrote: > On Thu, Nov 06, 2014 at 10:18:22AM -0600, Nishanth Menon wrote: >> BeagleBoard-X15 is the next generation Open Source Hardware >> BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHZ >> A15 processor. The platform features 2GB DDR3L (w/dual 32bit >> busses), eSATA, 3 USB3.0 ports, integrated HDMI (1920x108@60), >> separate LCD port, video In port, 4GB eMMC, uSD, Analog audio >> in/out, dual 1G Ethernet. >> >> For more information, refer to: BeagleBoard-X15 Wiki: >> http://www.elinux.org/Beagleboard:BeagleBoard-X15 >> >> AM5728 is part of the Sitara product family whose additional >> details will be available: >> http://www.ti.com/lsds/ti/arm/overview.page >> >> Technical Reference Manual for AM5728 is public domain at: >> http://www.ti.com/lit/spruhz6 >> >> Just add basic support for the moment, the following updates are >> needed: i) Ethernet - depends on SoC dts fixes ii) USB Client >> (USB2) - depends on GPIO extcon ii) HDMI - additional driver >> fixes pending iii) Audio - additional driver fixes pending >> >> Signed-off-by: Felipe Balbi <balbi@xxxxxx> Signed-off-by: >> Nishanth Menon <nm@xxxxxx> --- >> >> Tested with omap2plus_defconfig modified as: >> http://slexy.org/view/s2DRTzUwjj boot log: >> http://slexy.org/raw/s25Grf1uoo based on 3.18-rc1 tag. >> >> Support for u-boot has been posted as well: (series ending >> http://patchwork.ozlabs.org/patch/407552/ ) >> >> Side note: this patch generates a few unrelated checkpatch >> warning for compatible which probably is part of appropriate >> driver documentation fixes (functionality is already present). >> >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/am57xx-beagle-x15.dts | 405 >> +++++++++++++++++++++++++++++++ 2 files changed, 406 >> insertions(+) create mode 100644 >> arch/arm/boot/dts/am57xx-beagle-x15.dts >> >> diff --git a/arch/arm/boot/dts/Makefile >> b/arch/arm/boot/dts/Makefile index 38c89ca..eee1e4f 100644 --- >> a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ >> -347,6 +347,7 @@ dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \ >> omap5-sbc-t54.dtb \ omap5-uevm.dtb dtb-$(CONFIG_SOC_DRA7XX) += >> dra7-evm.dtb \ + am57xx-beagle-x15.dtb \ dra72-evm.dtb >> dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \ >> orion5x-lacie-ethernet-disk-mini-v2.dtb \ diff --git >> a/arch/arm/boot/dts/am57xx-beagle-x15.dts >> b/arch/arm/boot/dts/am57xx-beagle-x15.dts new file mode 100644 >> index 0000000..1f1875b --- /dev/null +++ >> b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -0,0 +1,405 @@ +/* + >> * Copyright (C) 2014 Texas Instruments Incorporated - >> http://www.ti.com/ + * + * This program is free software; you can >> redistribute it and/or modify + * it under the terms of the GNU >> General Public License version 2 as + * published by the Free >> Software Foundation. + */ +/dts-v1/; + +#include "dra74x.dtsi" >> +#include <dt-bindings/clk/ti-dra7-atl.h> +#include >> <dt-bindings/gpio/gpio.h> +#include >> <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "TI >> AM5728 BeagleBoard-X15"; + compatible = "ti,am572x-beagle-x15", >> "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; + + aliases { + >> rtc0 = &mcp_rtc; + rtc1 = &tps659038_rtc; + }; + + memory { + >> device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1GB >> to start. Target 2GB */ > > 1GiB ? Why would you put this here btw ? u-boot fills this one up. Yes, it should either be the full and correct value or 0x0 (like a number of PowerPC platforms do) so it's clear something else gives us the right value here. - -- Tom -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAEBAgAGBQJUW6PmAAoJENk4IS6UOR1WV2kQAI7JY0DFR+XsWMAZ2shiGcF6 +ZotxE4m030EQgfi8FnKe+i5u5pvHhJFqazRGX2cpYvj5X0fOnO730cyGLvunuQA npVDTcu/4RASxOUtEAW88u/wxUqL1BvYTHlcFTOnaeYJbgvt/C+QIO/wK+izAPso 2ckS23d43DCAW2aVRo2Eq/L3CehjZz3dpQSzTyjWdYbQ0gROE4IWQ5J2qnSFYzhO VO5CQb4gqP0iAVk96Z6RJWtQxaYGfNta9QDCaEkZ6OOo4z+MHvdfk5a5HiJzfzlr VkRUaRql4UmvFFwUFoeYcsde1Mno8Ka3jXq94soNvnq0LiIYPjdLBI/7ca9exdbV CnY3TxtZOfYqRsGiSF1mac8wqCF7kBC+u7nGGK1sTdNzhN5dFrIfL0tkfl8/avfH YYyu/WeZEEZ8MJVk0KruXUgG1kge3FJc2v79AdDaiZtp6xcl5p+pVtCkx8QrCfGg ofPjEtmGKSatIW/PmnOt0L/qmMQNnzwSbT+zgeUfgUXYLiH3NFK7wAdW5hWS4T3n v5h1O8t3THZLnmc1Fdv4pfI3ozcoWjSLROlnWhtO1E9JEtVon8XfpyPObJzKV5GA 9CT+5Ivrirz/4TEUJ1kCKBQcxyZUFEmEVKYu9KiMPux2Doz4MI4TZOZ/TcWTJiCJ hCXCtU398UOpnwVyy//D =N9bA -----END PGP SIGNATURE----- -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
