On Wed 2014-11-05 02:11:22, Sebastian Reichel wrote: > Hi Pavel, > > On Tue, Nov 04, 2014 at 09:51:17PM +0100, Pavel Machek wrote: > > I'd like to test a modem (and eventually to get it to work :-) ) on > > n900. So far I found: > > > > http://lwn.net/Articles/592485/ > > > > It says: > > > > # supported. Testing the patchset with ofono works like this: > > # > > # # provide cmt device for ofono > > # ln -sf /sys/bus/hsi/n900-modem /dev/cmt > > > > [...] > > > > That seemed to match, so I symlinked it. > > looks ok. You should have the following files: > > /dev/cmt/cmt_apeslpx > /dev/cmt/cmt_bsi > /dev/cmt/cmt_en > /dev/cmt/cmt_rst_rq > /dev/cmt/cmt_rst No, it is not ok :-(. I did enable CONFIG_CMT now (it was not enabled before, and wow, that entry has least helpful config help, ever; is it related?), but still can't see the required files: root@n900:/sys# find . | grep cmt ./bus/hsi/devices/cmt_speech ./bus/hsi/drivers/cmt_speech ./bus/hsi/drivers/cmt_speech/bind ./bus/hsi/drivers/cmt_speech/cmt_speech ./bus/hsi/drivers/cmt_speech/uevent ./bus/hsi/drivers/cmt_speech/unbind ./devices/virtual/misc/cmt_speech ./devices/virtual/misc/cmt_speech/dev ./devices/virtual/misc/cmt_speech/power ./devices/virtual/misc/cmt_speech/power/control ./devices/virtual/misc/cmt_speech/power/runtime_active_time ./devices/virtual/misc/cmt_speech/power/autosuspend_delay_ms ./devices/virtual/misc/cmt_speech/power/runtime_status ./devices/virtual/misc/cmt_speech/power/runtime_suspended_time ./devices/virtual/misc/cmt_speech/subsystem ./devices/virtual/misc/cmt_speech/uevent ./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech ./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power ./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power/control ./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power/runtime_active_time ./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power/autosuspend_delay_ms ./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power/runtime_status ./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/power/runtime_suspended_time ./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/modalias ./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/driver ./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/subsystem ./devices/68000000.ocp/48058000.ssi-controller/ssi0/port0/cmt_speech/uevent ./class/misc/cmt_speech root@n900:/sys# (What does CMT mean? I should fix the help files, I guess...) > > root@n900:~# ofonod --nodetach --debug & > > [1] 3552 > > no output from ofono? Actually, a lot of output from ofonod, but nothing useful. > > root@n900:~# mdbus2 -s org.ofono /n900_0 xyz > > [ERR]: There is no method with name xyz on path /n900_0! > > > > [...] > > > > Any ideas? > > call mdbus2 with fewer arguments to see what is available on the > bus: > > mdbus2 -s => list all system services > mdbus2 -s org.ofono => list all ofono objects > mdbus2 -s org.ofono /n900_0 => list all methods from n900 object root@n900:~# mdbus2 -s org.ofono / root@n900:~# But since I do not have required cmt_ files, I guess that's expected? Thanks, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
