Hi Tony, These patches address GPMC configuration issues and are for v3.19. Patches based on v3.18-rc1. - Make sure to print a user visible error if a requested GPMC timing configuration can't be met. - Don't create GPMC child device if a GPMC timing could not be set. - Always enable address lines A26-A11 for non-NAND devices. - Perform GPMC configuration as per recommended procedure i.e. keep Chip Select disabled while changing GPMC configuration. Tested on dra7-evm, am437x-gp-evm and beagleboard. cheers, -roger Roger Quadros (5): ARM: OMAP2+: gpmc: Print error message in set_gpmc_timing_reg() ARM: OMAP2+: gpmc: Error out if timings fail in gpmc_probe_generic_child() ARM: OMAP2+: gpmc: Always enable A26-A11 for non NAND devices ARM: OMAP2+: gpmc: Keep Chip Select disabled while configuring it ARM: OMAP2+: gpmc: Sanity check GPMC fck on probe arch/arm/mach-omap2/gpmc.c | 87 ++++++++++++++++++++++++++++------------------ 1 file changed, 54 insertions(+), 33 deletions(-) -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html