On Tue, Sep 09, 2014 at 05:31:09PM +0300, Roger Quadros wrote: > Some TI SoCs like DRA7 have a RAMINIT register specification > different from the other AMxx SoCs and as expected by the > existing driver. > > To add more insanity, this register is shared with other > IPs like DSS, PCIe and PWM. > > Provides a more generic mechanism to specify the RAMINIT > register location and START/DONE bit position and use the > syscon/regmap framework to access the register. > > Signed-off-by: Roger Quadros <rogerq@xxxxxx> > --- > .../devicetree/bindings/net/can/c_can.txt | 7 ++ > drivers/net/can/c_can/c_can.h | 11 ++- > drivers/net/can/c_can/c_can_platform.c | 109 +++++++++++++++------ > 3 files changed, 95 insertions(+), 32 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt > index 8f1ae81..e12d1a1 100644 > --- a/Documentation/devicetree/bindings/net/can/c_can.txt > +++ b/Documentation/devicetree/bindings/net/can/c_can.txt > @@ -13,6 +13,13 @@ Optional properties: > - ti,hwmods : Must be "d_can<n>" or "c_can<n>", n being the > instance number > > +- ti,raminit-syscon : Handle to system control region that contains the > + RAMINIT register. If specified, the second memory resource > + in the reg property must index into the RAMINIT > + register within the syscon region There seems to be a simple "syscon" property these days. > +- ti,raminit-start-bit : Bit posistion of START bit in the RAMINIT register > +- ti,raminit-done-bit : Bit position of DONE bit in the RAMINIT register This should not be encoded in DT! This is not describing hardware setup. The driver should know where the bits are for the syscon phandle, depending on which SoC it runs...
Attachment:
signature.asc
Description: Digital signature
