On 06/23/2014 02:11 PM, Nishanth Menon wrote:
> On Mon, Jun 23, 2014 at 2:50 PM, Stephen Warren <swarren@xxxxxxxxxxxxx> wrote:
>> On 06/20/2014 11:26 AM, Nishanth Menon wrote:
>>> We use regmap regulator ops to enable/disable and check if regulator
>>> is enabled for various SMPS. However, these depend on valid
>>> enable_reg, enable_mask and enable_value in regulator descriptor.
>>>
>>> Currently we do not populate these for SMPS other than SMPS10, this
>>> results in spurious results as regmap assumes that the values are
>>> valid and ends up reading register 0x0 RTC:SECONDS_REG on Palmas
>>> variants that do have RTC! To fix this, we update proper parameters
>>> for the descriptor fields.
>>>
>>> Further, we want to ensure the behavior consistent with logic
>>> prior to commit dbabd624d4eec50b6, where, once you do a set_mode,
>>> enable/disable ensure the logic remains consistent and configures
>>> Palmas to the configuration that we set with set_mode (since the
>>> configuration register is common). To do this, we can rely on the
>>> regulator core's regulator_register behavior where the regulator
>>> descriptor pointer provided by the regulator driver is stored. (no
>>> reallocation and copy is done). This lets us update the enable_value
>>> post registration, to remain consistent with the mode we configure as
>>> part of set_mode.
>>>
>>> Fixes: dbabd624d4eec50b6 ("regulator: palmas: Reemove open coded functions with helper functions")
>>> Reported-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
>>> Signed-off-by: Nishanth Menon <nm@xxxxxx>
>>
>> Unfortunately, there is still some lingering problem in the original
>> commit. In next-20130623 (and indeed since at least next-20140611),
>> neither the LCD panel or HDMI work on the NVIDIA Dalmore board.
>> Reverting this commit (just for conflicts) and the original problematic
>> commit "regulator: palmas: Reemove open coded functions with helper
>> functions" solves this. I see the following on boot:
>>
>>> [ 3.558776] tegra-dsi 54300000.dsi: cannot get VDD supply
>>> [ 3.564272] platform 54300000.dsi: Driver tegra-dsi requests probe deferral
>>> [ 3.571990] tegra-hdmi 54280000.hdmi: failed to get PLL regulator
>>> [ 3.578377] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
>>
>> ... but probe deferral never completes, yet with your "remove open coded
>> ..." patch reverted, it all works fine.
>>
>> Can you please take another look at the original patch?
>
> Will let keerthy (original patch author) comment on it.
>
> arch/arm/boot/dts/tegra114-dalmore.dts tps65090, avdd_lcd_reg I
> suppose is the path in question?
>
> Seems to use drivers/mfd/tps65090.c and
> drivers/regulator/tps65090-regulator.c and not palmas?
>
> Am I looking at the right dts?
Yes, that's the right DTS.
There's both a 65090 and a Palmas on the board. It's probably simpler to
look at the HDMI PLL regulator, since the path to the Palmas is more
obvious:
/ {
host1x@50000000 {
hdmi@54280000 {
pll-supply = <&palmas_smps3_reg>;
...
i2c@7000d000 {
palmas: tps65913@58 {
compatible = "ti,palmas";
pmic {
compatible = "ti,tps65913-pmic",
"ti,palmas-pmic";
regulators {
palmas_smps3_reg: smps3 {
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
