On Mon, Jun 23, 2014 at 2:50 PM, Stephen Warren <swarren@xxxxxxxxxxxxx> wrote:
> On 06/20/2014 11:26 AM, Nishanth Menon wrote:
>> We use regmap regulator ops to enable/disable and check if regulator
>> is enabled for various SMPS. However, these depend on valid
>> enable_reg, enable_mask and enable_value in regulator descriptor.
>>
>> Currently we do not populate these for SMPS other than SMPS10, this
>> results in spurious results as regmap assumes that the values are
>> valid and ends up reading register 0x0 RTC:SECONDS_REG on Palmas
>> variants that do have RTC! To fix this, we update proper parameters
>> for the descriptor fields.
>>
>> Further, we want to ensure the behavior consistent with logic
>> prior to commit dbabd624d4eec50b6, where, once you do a set_mode,
>> enable/disable ensure the logic remains consistent and configures
>> Palmas to the configuration that we set with set_mode (since the
>> configuration register is common). To do this, we can rely on the
>> regulator core's regulator_register behavior where the regulator
>> descriptor pointer provided by the regulator driver is stored. (no
>> reallocation and copy is done). This lets us update the enable_value
>> post registration, to remain consistent with the mode we configure as
>> part of set_mode.
>>
>> Fixes: dbabd624d4eec50b6 ("regulator: palmas: Reemove open coded functions with helper functions")
>> Reported-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
>> Signed-off-by: Nishanth Menon <nm@xxxxxx>
>
> Unfortunately, there is still some lingering problem in the original
> commit. In next-20130623 (and indeed since at least next-20140611),
> neither the LCD panel or HDMI work on the NVIDIA Dalmore board.
> Reverting this commit (just for conflicts) and the original problematic
> commit "regulator: palmas: Reemove open coded functions with helper
> functions" solves this. I see the following on boot:
>
>> [ 3.558776] tegra-dsi 54300000.dsi: cannot get VDD supply
>> [ 3.564272] platform 54300000.dsi: Driver tegra-dsi requests probe deferral
>> [ 3.571990] tegra-hdmi 54280000.hdmi: failed to get PLL regulator
>> [ 3.578377] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral
>
> ... but probe deferral never completes, yet with your "remove open coded
> ..." patch reverted, it all works fine.
>
> Can you please take another look at the original patch?
Will let keerthy (original patch author) comment on it.
arch/arm/boot/dts/tegra114-dalmore.dts tps65090, avdd_lcd_reg I
suppose is the path in question?
Seems to use drivers/mfd/tps65090.c and
drivers/regulator/tps65090-regulator.c and not palmas?
Am I looking at the right dts?
---
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
