Re: [PATCH 2/2] arm: dts: add support for AM437x StarterKit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 13, 2014 at 11:15:47AM -0500, Felipe Balbi wrote:
> Add support for TI's AM437x StarterKit Evaluation
> Module.
> 
> Cc: Josh Elliot <jelliott@xxxxxx>
> Cc: Darren Etheridge <detheridge@xxxxxx>
> Signed-off-by: Felipe Balbi <balbi@xxxxxx>
> ---
> 
> Thanks to Josh and Darren for helping out with Audio and Display parts of this
> DTS.
> 
>  .../devicetree/bindings/arm/omap/omap.txt          |   3 +
>  arch/arm/boot/dts/Makefile                         |   1 +
>  arch/arm/boot/dts/am437x-sk-evm.dts                | 539 +++++++++++++++++++++
>  3 files changed, 543 insertions(+)
>  create mode 100644 arch/arm/boot/dts/am437x-sk-evm.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
> index d22b216..0edc903 100644
> --- a/Documentation/devicetree/bindings/arm/omap/omap.txt
> +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
> @@ -129,6 +129,9 @@ Boards:
>  - AM437x GP EVM
>    compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43"
>  
> +- AM437x SK EVM: AM437x StarterKit Evaluation Module
> +  compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43"
> +
>  - DRA742 EVM:  Software Development Board for DRA742
>    compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
>  
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 0f1e8be..749cdc8 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -306,6 +306,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \
>  	omap4-var-dvk-om44.dtb \
>  	omap4-var-stk-om44.dtb
>  dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \
> +	am437x-sk-evm.dtb \
>  	am437x-gp-evm.dtb
>  dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \
>  	omap5-sbc-t54.dtb \
> diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
> new file mode 100644
> index 0000000..51ffab1
> --- /dev/null
> +++ b/arch/arm/boot/dts/am437x-sk-evm.dts
> @@ -0,0 +1,539 @@
> +/*
> + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/* AM437x SK EVM */
> +
> +/dts-v1/;
> +
> +#include "am4372.dtsi"
> +#include <dt-bindings/pinctrl/am43xx.h>
> +#include <dt-bindings/pwm/pwm.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> +	model = "TI AM437x SK EVM";
> +	compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
> +
> +	aliases {
> +		display0 = &lcd0;
> +	};
> +
> +	vmmcsd_fixed: fixedregulator-sd {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vmmcsd_fixed";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		enable-active-high;
> +	};
> +
> +	v33_fixed: fixedregulator-v33 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "v33_fixed";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		enable-active-high;
> +	};
> +
> +	v18_fixed: fixedregulator-v18 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "v18_fixed";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		enable-active-high;
> +	};
> +
> +	backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
> +		brightness-levels = <0 51 53 56 62 75 101 152 255>;
> +		default-brightness-level = <8>;
> +	};
> +
> +	sound {
> +		compatible = "ti,da830-evm-audio";
> +		ti,model = "AM437x-SK-EVM";
> +		ti,audio-codec = <&tlv320aic3106>;
> +		ti,mcasp-controller = <&mcasp1>;
> +		ti,codec-clock-rate = <24000000>;
> +		ti,audio-routing =
> +			"Headphone Jack",       "HPLOUT",
> +			"Headphone Jack",       "HPROUT";
> +	};
> +
> +	matrix_keypad: matrix_keypad@0 {
> +		compatible = "gpio-matrix-keypad";
> +
> +		debounce-delay-ms = <5>;
> +		col-scan-delay-us = <1500>;
> +
> +		row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH		/* Bank5, pin5 */
> +				&gpio5 6 GPIO_ACTIVE_HIGH>;	/* Bank5, pin6 */
> +
> +		col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH		/* Bank5, pin13 */
> +				&gpio5 4 GPIO_ACTIVE_HIGH>;	/* Bank5, pin4 */
> +
> +		linux,keymap = <
> +				MATRIX_KEY(0, 0, KEY_DOWN)
> +				MATRIX_KEY(0, 1, KEY_RIGHT)
> +				MATRIX_KEY(1, 0, KEY_LEFT)
> +				MATRIX_KEY(1, 1, KEY_UP)
> +			>;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led@0 {
> +			label = "am437x-sk:red:heartbeat";
> +			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 0 */
> +			linux,default-trigger = "heartbeat";
> +			default-state = "off";
> +		};
> +
> +		led@1 {
> +			label = "am437x-sk:green:mmc1";
> +			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 1 */
> +			linux,default-trigger = "mmc0";
> +			default-state = "off";
> +		};
> +
> +		led@2 {
> +			label = "am437x-sk:blue:cpu0";
> +			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 2 */
> +			linux,default-trigger = "cpu0";
> +			default-state = "off";
> +		};
> +
> +		led@3 {
> +			label = "am437x-sk:blue:usr3";
> +			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 3 */
> +			default-state = "off";
> +		};
> +	};
> +
> +	lcd0: display {
> +		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
> +		label = "lcd";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&lcd_pins>;
> +
> +		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> +
> +		panel-timing {
> +			clock-frequency = <9000000>;
> +			hactive = <480>;
> +			vactive = <272>;
> +			hfront-porch = <8>;
> +			hback-porch = <43>;
> +			hsync-len = <4>;
> +			vback-porch = <12>;
> +			vfront-porch = <4>;
> +			vsync-len = <10>;
> +			hsync-active = <0>;
> +			vsync-active = <0>;
> +			de-active = <1>;
> +			pixelclk-active = <1>;
> +		};
> +
> +		port {
> +			lcd_in: endpoint {
> +				remote-endpoint = <&dpi_out>;
> +			};
> +		};
> +	};
> +};
> +
> +&am43xx_pinmux {
> +	i2c0_pins: i2c0_pins {
> +		pinctrl-single,pins = <
> +			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
> +			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
> +		>;
> +	};
> +
> +	i2c1_pins: i2c1_pins {
> +		pinctrl-single,pins = <
> +			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
> +			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
> +		>;
> +	};
> +
> +	mmc1_pins: pinmux_mmc1_pins {
> +		pinctrl-single,pins = <
> +			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
> +		>;
> +	};
> +
> +	ecap0_pins: backlight_pins {
> +		pinctrl-single,pins = <
> +			0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
> +		>;
> +	};
> +
> +	edt_ft5306_ts_pins: edt_ft5306_ts_pins {
> +		pinctrl-single,pins = <
> +			0x74 (PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
> +			0x78 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
> +		>;
> +	};
> +
> +	cpsw_default: cpsw_default {
> +		pinctrl-single,pins = <
> +			/* Slave 1 */
> +			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
> +			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
> +			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
> +			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
> +			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
> +			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
> +			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
> +			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
> +			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
> +			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
> +			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
> +			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
> +
> +			/* Slave 2 */
> +			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
> +			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
> +			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
> +			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
> +			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
> +			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
> +			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
> +			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
> +			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
> +			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
> +			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
> +			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
> +		>;
> +	};
> +
> +	cpsw_sleep: cpsw_sleep {
> +		pinctrl-single,pins = <
> +			/* Slave 1 reset value */
> +			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +
> +			/* Slave 2 reset value */
> +			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +		>;
> +	};
> +
> +	davinci_mdio_default: davinci_mdio_default {
> +		pinctrl-single,pins = <
> +			/* MDIO */
> +			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
> +			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
> +		>;
> +	};
> +
> +	davinci_mdio_sleep: davinci_mdio_sleep {
> +		pinctrl-single,pins = <
> +			/* MDIO reset value */
> +			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +		>;
> +	};
> +
> +	dss_pins: dss_pins {
> +		pinctrl-single,pins = <
> +			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
> +			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
> +			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
> +			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
> +			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
> +			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
> +			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
> +			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
> +			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS DATA 0 */
> +			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS DATA 15 */
> +			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS VSYNC */
> +			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS HSYNC */
> +			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS PCLK */
> +			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS AC BIAS EN */
> +
> +		>;
> +	};
> +
> +	qspi_pins: qspi_pins {
> +		pinctrl-single,pins = <
> +			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
> +			0x88 (PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
> +			0x90 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
> +			0x94 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
> +			0x98 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
> +			0x9c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
> +		>;
> +	};
> +
> +	mcasp1_pins: mcasp1_pins {
> +		pinctrl-single,pins = <
> +			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
> +			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
> +			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
> +			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
> +		>;
> +	};
> +
> +	lcd_pins: lcd_pins {
> +		pinctrl-single,pins = <
> +			/* GPIO 5_8 to select LCD / HDMI */
> +			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
> +		>;
> +	};
> +};
> +
> +&i2c0 {
> +        status = "okay";
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&i2c0_pins>;
> +
> +	tps@2d {
> +		compatible = "ti,tps65218";
> +		reg = <0x2d>;
> +	};
> +
> +	at24@50 {
> +		compatible = "at24,24c256";
> +		pagesize = <64>;
> +		reg = <0x50>;
> +	};
> +};
> +
> +&i2c1 {
> +        status = "okay";
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&i2c1_pins>;
> +
> +	edt-ft5306@38 {
> +		status = "okay";
> +		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&edt_ft5306_ts_pins>;
> +		reg = <0x38>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <31 0>;
> +
> +		wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
> +
> +		touchscreen-size-x = <800>;
> +		touchscreen-size-y = <600>;
> +	};
> +
> +	tlv320aic3106: tlv320aic3106@1b {
> +		compatible = "ti,tlv320aic3106";
> +		reg = <0x1b>;
> +		status = "okay";
> +
> +		/* Regulators */
> +		AVDD-supply = <&v33_fixed>;
> +		IOVDD-supply = <&v33_fixed>;
> +		DRVDD-supply = <&v33_fixed>;
> +		DVDD-supply = <&v18_fixed>;
> +	};
> +};
> +
> +&epwmss0 {
> +	status = "okay";
> +};
> +
> +&ecap0 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&ecap0_pins>;
> +};
> +
> +&gpio0 {
> +	status = "okay";
> +};
> +
> +&gpio1 {
> +	status = "okay";
> +};
> +
> +&gpio5 {
> +	status = "okay";
> +};
> +
> +&mmc1 {
> +	status = "okay";
> +	vmmc-supply = <&vmmcsd_fixed>;
> +	bus-width = <4>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc1_pins>;
> +	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&usb2_phy1 {
> +	status = "okay";
> +};
> +
> +&usb1 {
> +	dr_mode = "peripheral";
> +	status = "okay";
> +};
> +
> +&usb2_phy2 {
> +	status = "okay";
> +};
> +
> +&usb2 {
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&qspi {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&qspi_pins>;
> +
> +	spi-max-frequency = <48000000>;
> +	m25p80@0 {
> +		compatible = "mx66l51235l";
> +		spi-max-frequency = <48000000>;
> +		reg = <0>;
> +		spi-cpol;
> +		spi-cpha;
> +		spi-tx-bus-width = <1>;
> +		spi-rx-bus-width = <4>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +
> +		/* MTD partition table.
> +		 * The ROM checks the first 512KiB
> +		 * for a valid file to boot(XIP).
> +		 */
> +		partition@0 {
> +			label = "QSPI.U_BOOT";
> +			reg = <0x00000000 0x000080000>;
> +		};
> +		partition@1 {
> +			label = "QSPI.U_BOOT.backup";
> +			reg = <0x00080000 0x00080000>;
> +		};
> +		partition@2 {
> +			label = "QSPI.U-BOOT-SPL_OS";
> +			reg = <0x00100000 0x00010000>;
> +		};
> +		partition@3 {
> +			label = "QSPI.U_BOOT_ENV";
> +			reg = <0x00110000 0x00010000>;
> +		};
> +		partition@4 {
> +			label = "QSPI.U-BOOT-ENV.backup";
> +			reg = <0x00120000 0x00010000>;
> +		};
> +		partition@5 {
> +			label = "QSPI.KERNEL";
> +			reg = <0x00130000 0x0800000>;
> +		};
> +		partition@6 {
> +			label = "QSPI.FILESYSTEM";
> +			reg = <0x00930000 0x36D0000>;
> +		};
> +	};
> +};
> +
> +&mac {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&cpsw_default>;
> +	pinctrl-1 = <&cpsw_sleep>;
> +	dual_emac = <1>;
> +	status = "okay";
> +};
> +
> +&davinci_mdio {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&davinci_mdio_default>;
> +	pinctrl-1 = <&davinci_mdio_sleep>;
> +	status = "okay";
> +};
> +
> +&cpsw_emac0 {
> +	phy_id = <&davinci_mdio>, <4>;
> +	phy-mode = "rgmii";
> +	dual_emac_res_vlan = <1>;
> +};
> +
> +&cpsw_emac1 {
> +	phy_id = <&davinci_mdio>, <5>;
> +	phy-mode = "rgmii";
> +	dual_emac_res_vlan = <2>;
> +};
> +
> +&elm {
> +	status = "okay";
> +};
> +
> +&mcasp1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mcasp1_pins>;
> +
> +	status = "okay";
> +
> +	op-mode = <0>;
> +	tdm-slots = <2>;
> +	serial-dir = <
> +		0 0 1 2
> +	>;
> +
> +	tx-num-evt = <1>;
> +	rx-num-evt = <1>;
> +};
> +
> +&dss {
> +	status = "okay";
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&dss_pins>;
> +
> +	port {
> +		dpi_out: endpoint@0 {
> +			remote-endpoint = <&lcd_in>;
> +			data-lines = <24>;
> +		};
> +	};
> +};
> -- 
> 2.0.0.rc1
> 

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux